S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

FlyCat EDF Foam Jet VERY FAST (kit uniquement)

FlyCat EDF Foam Jet VERY FAST (kit uniquement)

QTY:

Now save enregistrer 0,00 € 0,00 €

28,02 €
Rating:
Stock:
Poids
1395 g
SKU:
OR028-070

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Kit FlyCat EDF
Ce petit kit prend environ 4 heures pour construire et satisfera les jocky des gaz en chacun de nous!
Le flycat est livré avec 56mm EDF et vous aurez besoin
d' un ESC 25A & 4800kv Inrunner.
Ce plan est extrêmement rapide, (plus
de 100 mph!), Mais encore stable au vol lent.

Spec.
Envergure: 640mm
Longueur: 800mm
Poids: 290g
BESC: 25A (non inclus)
Moteur: 4800kv 20-30 taille Inrunner (non inclus)
Lipoly: 1300mAh 11.1V 20C (non inclus)
 


Obligatoire.
Motor & ESC
3 x 9g Servo
5 ou 10min époxy (Araldite)
1 x Servo Y plomb
1 x Servo Extention plomb
12AWG Silicon fil (20cm Pour moteur ESC)
1300mah 11.1v 20C batterie lipo
Votre propre récepteur et
l' émetteur

Notre rapport de vol.
Kit correspond bien ensemble, léger ponçage des bords avant et arrière requis pour enlever
la mousse supplémentaire. Nous avons choisi de ne pas renforcer l'aile avec un tube CF, qui na pas se révéler être un problème, même à pleine vitesse G tourne.
Nous avons choisi de monter le BESC étant la zone de
la batterie, au cas où la batterie nécessaire pour être déplacé vers l' avant pour ajuster CofG, mais ce ne était pas nécessaire.
EDF a été monté sur le bâton
de montage. Montage de bâton a été raccourcie, avec le morceau supplémentaire utilisé pour soulever le FED hors du bâton pour effacer le FED linceul. 2 boulons lieu l'unité de ventilateur à la baguette, un avant et un après les pales du ventilateur.
Premier vol.
Nous avons gardé CofG 9.5cm du sommet des vents bord
d' attaque. Le flycat a été lancé à la main à 3/4 gaz, accellerating rapidement. A notre grande surprise ne parage était nécessaire.
Le flycat est un kit extrêmement rapide à voler, et
a exigé beaucoup d'ascenseur dans les virages. Nous vous suggérons de mettre l'ascenseur maximale jette. Il a besoin d' énormes quantités d'ascenseur dans les virages!
Dans l' ensemble un excellent plan qui flys en douceur, même les jours de vent.
Nous suggérons un bon pack lipo, comme ce petit hotty va mâcher
à travers un 1500mAh en seulement 5 minutes. Nous avons utilisé le pack 3S1P ZIPPY-R 1800mAh 22C pour environ 8 vols minute. Par rapport à la meute ZIPPY-Q qui nous a court à environ 7 minutes.


 

Product
Specifications

Informations supplémentaires

  • Référence:
    OR028-070
  • Brand:
    Non
  • Poids (g)
    1395.00
  • Longueur
    670.00
  • Largeur:
    95.00
  • Taille:
    375.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A bit disappointed, I found out it's eps after I bought it! If it's half as tough as the skyfun I'll be happy with it :-)) great options with it edf or prop, WHY do they make these edfs where you have to buy SPECIAL long narrow motors to fit in them? I have a box full of spare motors none of which will fit the edf

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little plane and great little price. I fitted a Dr mad 50mm 4800 EDF and squeezed a zippy 2200 3cell in the nose. Worth buying good control horns and a couple of earth magnets for the canopy. fly's very stable for a little plane, you can also fly as if you stole it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the money this is a great little model, fly's really well. Invest in better quality control horns and earth magnets for the canopy, I also fitted a Dr mad 50mm fan. a careful bit of thumbing the inside of the battery area allows a zippy 2200 3cell to fit nicely.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used Turnigy 2610 4000KV, Turnigy Plush 40 Amp ESC, 1800Mah 20C and supplied EDF.
Speed a bit dissapointiung but it did fly and handle very nicely, sure needs a bit of power on when landing.
7mm throw on aileron, 12mm throw on elevator, 30pcntexpo. CoG at 110mm.
Will try 2610 5000KV next.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am building my second Fly cat . ( the first one being still in fly condition ) .. I want to put a tri-axis gyro box (orange RX-3S which is the smallest ) on the 3 rudders .( which needs to carve some place inside the fuse )
But , despite the engine I choosed for N 1 was great ,(TGY 2815 , ID: T28151A4800 . 73 g ) I look for an other engine that should be less heavy : an INRUNNER , Out shaft diam : < 24mm . Kv 4800 . Power # 400W
Who can help me to find an other engine than the TGY 2815 EDF ?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The fan adapter in this kit has a 3mm diameter hole in it. Nearly all the inrunner motors have a 2mm shaft diameter. Can someone who is using the EDF post a source for an appropriate motor to fit the fan housing. Thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 for this palne,this plane a very good quality and handling, i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv propeller 6x4.Very stable once

Thanks hobby,i give 6 thumb
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane a very good quality and handling,i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv.Very stable once
Thanks hobby
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3S 1000mah nano tech, 3 HXT servo, 30A birdie and Turnigy 2632 Brushless Motor 3400kv 350W with 5x5 pusher prop. CG 9 cm from the crossing of the leading edge. Average max speed : 120 km/h Perfect flight, easy to launch and less than 50 $ all together. A lot of fun.
For more speed find another motor high kv, 500W, 3S.
I definitely would get it again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very cheap, simple good kit that flies well and very fast long your setup and COG is correct. Very fast build as its so simple, great jet especially people who have spare electronics laying around from dead planes. I added tiny bit lead weight to the front to correct C.o.G running 1300mah 3S 25C lipo, 4000kv outrunner and 30amp esc
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • flycat pusher

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.