Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Système de stabilisation de l'hélicoptère Flymentor 3D

Generating Links

Système de stabilisation de l'hélicoptère Flymentor 3D

Prix:

Now save économisez 0,00 € 0,00 €

89,77 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
FMentor-3D
Livraison gratuite? Cliquez ici pour apprendre plus!
 
Flymentor 3D est une unité de stabilisation qui aide l'hélicoptère à l'auto-stabiliser en vol stationnaire et aussi l'auto récupération pendant manuever 3D.
Cet appareil est livré avec 5 articles; le câble de données principale unité, gyro, capteur CCD, logiciel de CD et USB (manuel est en format PDF sur le CD).
Caractéristiques:
Contrôlez tous les mouvements, y compris la stabilisation de l'attitude, le contrôle de la vitesse, la position de verrouillage.
capteur CCO pour capturer l'image de terrain, en comparant les images pour éviter la dérive.
Mettez le mode de fonctionnement (mode horizontal et le mode de position) par le canal AUX.
L'intégration de verrouillage tête gyro et mélangeur à plateau oscillant.
Contrôlez la sensibilité et le mode du gyroscope interne à travers le canal GEAR.
plateau oscillant support 3S 120 °, 3S 140 °, 90 ° 4S, 4S 90 ° + 45 °
Gardez l'équilibre en vol inversé.
Configuré par ordinateur via USB.
Si vous utilisez FM / PPM dispositif de commande à distance, lorsque l'hélicoptère est hors de contrôle, le Flymentor 30 sera mis en ailerons, profondeur, direction au neutre, et gardez pas dans la position de signal final, et passer en mode de positionnement automatique, la sensibilité est 70%.

Spécification:
Tension: 4.8-6.0V
: 55mA (sous 5V)
Poids: 37G
Température: O'C ~ + 40'C
Dans le mode de mode de stabilisation et le positionnement, la vitesse de rotation maximale autorisée: J Aileron et Ascenseur:,; 2000 / s
J Tail tournant (si vous utilisez gyro externe):,, 3600 / s
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Agustin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Funciona bien

Jul 29, 2020

Lo he probado con un clon del trex. Y como giroscopo funcina muy bien.
Lo de estabilazar no lo he conseguido.

henk | Acheteur vérifié

  • Overall
  • Quality
  • Value

good

Nov 01, 2019

very happy

David | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 04, 2016

I have installed the Flymentor in a 30 size helicopter with .36 glow engine and can report that it works just fine with nitro as well as electric. To avoid first flight problems, I made up a 'Lazy Susan' type turntable out of scrap chipboard, to tether the heli for testing, setting up tail gyro and getting TX sticks to operate in correct sense - well worth the effort.
Set the Flymentor to manual mode to get the tail rotor working properly in Normal and Heading hold modes, with aileron and elevator sticks functioning correctly - then switch Flymentor to Positioning mode and/or leveling mode to confirm that these settings work to correct movements rather than make them worse, (reverse controls with Helibal, if necessary). Then you are good to go.
Flymentor is a super bit of kit and well worth the money. I installed Helibal on an old laptop running Windows XP, so no problems, but until Helibal is compatible with Windows 10, buying the programmer is a good way to go.

new old flyer | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 19, 2015

this system is challenging to set up but its about the same as setting up a flybarless system. i was only able to get the program to run with vista, thankfully i had an old computer. the programming box is a must. once set up it manages my heli nicely and is a valuable tool for progressing your skills while minimizing crash repair costs.

Colin-M | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 29, 2015

I have been totally amazed with Flymentor, so very easy to install, setup and fly.



I actually use this in my frenzy as it has a lot of add ons and often have to study my tx to make sure i selecting the correct switch and this allows me to take my eyes off the heli and it doesn't fall out the sky.



I got a little confused in the setup on the tail servo, settings tell you to have everything set to 0 or off (trims etc) and servo reverse all at normal, then you set all sub-trims, reverse etc in Flymentor.

This did not work on the tail, if I left tx on normal it actually worked the rud in the correct direction but the gyro worked in reverse!

I pulled my hair out (whats left of it) and then finally realised if I Rev Rudd on tx and then on FM then all worked well.



Brilliant peice of kit and will save you its value in crash parts the first time someone taps you on the shoulder or crashes into with an FG marder while your flying, thanks james, near broke my leg but FM saved my heli.



Thumbs up.

crashexpert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 16, 2015

Hi, IMPORTANT before you start your installation! read your manual and use the file " Correct wiring for the Flymentor " there is an error in the manual

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 20, 2015

I read many complaints about this product .. but the truth is that if the configuration of your helicopter is well aligned .. Flymentor works well, it is true that there are many more complete systems, but for $ 70 you can not ask for more. works well with wind and almost gets lost maneuvers .. I recommend .. but have much patience when set. There are many videos explaining how to do

regards



lei muchas quejas sobre este producto.. pero la verdad es que si la configuracion de tu helicptero esta bien alineada.. flymentor funciona bien, es verdad que hay otros sistemas muchos mas completos, pero por 70 dolares no se puede pedir mas. funciona bien con viento y recupera de maniobras casi perdidas.. lo recomiendo.. pero tengan mucha paciencia al momento de configurarlo. hay muchos videos explicando como hacerlo

saludos

charles | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 17, 2015

finaly got my hk450gt set up and flying . the addition of this product made flying a better experience.I learned to set up heli properly & set up flymentor in one whack. keep up the good work Hobby King. my only complaint is set up didn't work on my pc. would suggest buying programmer, makes set up a lot more easy.

Filip | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2014

If u dont like simulators, Flymentor is best choice in this price.
I just started simple 3d, like inverted hover etc

Carsten | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2014

Can not get it to work with my SPECTRUM receiver
is there anyone who hved what the problem is?
it flashes 4 times red,
the USB connection works fine. :-(

Fichiers clients
Turnigy Er9X set up Download [20]
Flymentor 3D Manual Download [3807]
Setup on aHK450 with EURGLE V1 Transmitt Download [391]
Manual RUS Download [290]
Printable English Flymentor Manual Download [3796]
Flymentor 3D Deutsch Download [2540]
Flymentor 3D-page 14 only Download [1081]
FLYMENTOR ESPAÑOL Download [566]
No File Name Download [1260]
traduction French Download [416]
  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!