S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Fox EPO Planeur 2320mm (PNF)

Fox EPO Planeur 2320mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
2902 g
SKU:
FOXGLIDER
Description
du
La nouvelle Fox EPO est aussi grande qu'elle est belle!
Vous remarquerez immédiatement la grande taille de la cabine pour une grande variété de batteries, équipement radio et éventuellement système FPV. Fabriqué à partir de mousse EPO et comprenant 2 tiges en fibre de carbone (insérés lors du moule) et un menuisier en alliage seulement sur l'aile principale seule, ce modèle d'envergure 2.32m est rigide en vol et de pardon dans des accidents. Intelligemment conçu avec la simplicité à l'esprit, la Fox Planeur inclut des fonctionnalités telles que un auvent de verrouillage de pression, système de klaxon interne fournissant zéro glisser et un aspect plus soigné, plus un moule de fabrication de mousse soigneusement conçu maintient la peau du plan lisse et surtout exempts de vapeur laid taches d'armes à feu trouvées sur d'autres modèles. Construire le renard est un processus de 15 minutes qui nécessite seulement un pilote phillips tête de vis. Il suffit de visser dans la pièce de la queue, connectez votre Rx, branchez une batterie et vous êtes prêt!

Spécification;
Envergure: 2320mm
Longueur: 1290mm
Voler Poids: 1150g
Système d'alimentation: 750KV moteur Brushless
ESC: 30A (avec frein)
Radio: 4 canaux, 4 servos.

Compris;
Fox Planeur
Tous les servos préinstallés
Moteur pré-installé
ESC pré-installé
Pas de fabrication ou de construction supplémentaire requis.

Obligatoire;
Receiver / Transmitter 4Ch
2200mAh 3S Lipoly. (Batteries plus grosses vont travailler, mais peuvent affecter CG)

Remarque;

Ceci est un grand modèle et non pas la même que la version du modèle ST vendu elswhere. Cela est beaucoup plus grande.
* V2 fonctionnalités de la version améliorée des emplacements aileron servo.
Product
Specifications

Informations supplémentaires

  • Référence:
    FOXGLIDER
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    2902.00
  • Longueur:
    1340.00
  • Largeur:
    190.00
  • Taille
    341.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
It flys like a dream for an epo glider.
Motor is normal for soft wind.
change the elevator servo with a metal.
C of G not 4cm byt 6 cm or lighter bat.
first flight without trims.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy plane to fly! It can fly really slow so landing isnt a problem. I crashed mine today (sort of) and it was still fully intact, so its a tough plane.

I think the elevator can use a bit more travel. I use the ailerons as full capacity. The rudder is pretty big and thus very effective.

I flew it today in 10-15 kts wind, in this wind its lands nearly vertical.

So conclusion: Good sturdy plane, easy to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have found this to be an excellent flying glider despite a few issues that some have mentioned. The foam hinges do not last more than 4-5 f;lights before breaking off, the aircraft is slightly under powered, and it really should be factory equipped with flaps. It loves ot fly, but hates to come back down with just flaperons. I nylon pin hinged all surfaces, made balsa ailerons and flaps, econokoted the entire aircraft for strength, and bolted the wings through the canopy. The large wings tend to slip on the spar during flight and especially on landing and need a better way to secure them from slipping. Finally, I made servo protectors for the ailerons servo's as they tend to hit the ground occasionally on landing and snap servo gears. Overall, this plane is an great flyer at a great price and certainly draws attention at the field. Especially when lit rolls by on landing and keeps going.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Maidened it last weekend, had in total 4 flights. Very very nice plane, I flew it with a 3S 2200 mAh. Descents quite quickly for a glider (should go with a lighter battery I guess) but is a very fine plane to fly powered. Very relaxing. A joy to land too :-)

I removed all the stock clevis, horns etc from the kit as they are poor quality. Replaced it by decent hardware though.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe mit den Fox fr zwischendurch hinter dem Haus zum fliegen geholt. Ist wohl mein 12 oder 14 Segler. Das meiste VollGFK/CFK. Ich bin berrascht, wie gut der FOX gleitet, nicht bermassig langsam, aber sehr guter gleitwinkel. Der Motor reicht fr 45 Grad steigen und Regler arbeitet klaglos mit SBEC. Betreibe ihn mit 2200mA/20C/3S Turnigy. Damit stimmt auch der Schwerpunkt. Knnte noch etwas weiter hinten sein, aber der Akku ist am ANschlag. Flugbild ist wirklich toll und man sieht in aufgrund des grossen Rumpfes gut. Nach Abschwung um 50 mtr fehlen hinterher 25 mtr, aber naja bei dem Preis. Die flchen sindzum normalen fliegen ausreichend steif und die Oberflche sehr gut. Meine nderungen: Alle Ruder abgetrennt und mit faserverstrktem Klebeband neu gemacht, da zu schwergngig. Flchen vom Rumpf bis zur Hlfte oben und unten diagonal mit Fasertape im Abstand von 20cm getapted, da nicht verwindungssteif genug. Und habe mir noch Flaps eingebaut, um mit Krhenstellung landen zu knnen. Ansonstem das originalmaterial verwendet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi i got this glider from hk a few weeks ago. great glider for the price and flies very well. i have fitted 2 wooden dowels through the fuselage into the wing roots for added security. like the secure canopy fixing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Calidad. Precio
Muy buena, es muy noble en vuelo
Los aterrizas es los quiere con velocidad porque si no se cuelga y cae bastante rpido.
Materiales decentes.
El motor es justo para volar.
Y hacer algunas trepadas.
Por lo dems me gusto muchsimo su diseo y vuelo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent glider! Build was complete in under 1.5 hours and centre of gravity was perfect with a 2200 3S in the battery space. Flew very well during first flight with only minor trimming required, has plenty of power on 3S for 35-45 degree climb
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
(Continued) cg of 40mm. The Fox flies well and looks great in the air. Quite frankly at this price what's not to like!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received my Fox in August 2013. It has the tail mounted servo for the rudder and blue pilot with the cap, so not the version currently pictured on the product page. HobbyKing should do themselves a favour and update the product page images as the latest version is much better than the one pictured on the product page.
Mine had no shipping damage and I had no issues with the motor mount reported in some reviews.
I cut out all control surfaces and hinged them as even working them back and forward for a couple of hours didn't free them up enough and this would stress the servos. I also cut in flaps so that I could setup crow for landing and full span ailerons for increased manoeuvrability. At the moment I haven't set this up but have found that flaps on their own slow the Fox down well for landing.
I also changed the servos to HobbyKing 939MG's as I had some lying around and some owners have reported servo blowback during high speed aerobatics. I also added a 40A Plush ESC, again because I had a spare one.
The only assembly issue I had was that I found it hard to get the two horizontal stabiliser bolts secured as they appeared to be a little too short. Got there in the end though. I'm using 1300mAh Nanotech 45 C batteries and have added 40 grms of lead to the tail to balance her. My cg is now sitting at 63 mm from the leading edge, quite a way back from the recommended c
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Fox EPO Glider 2320mm

Upload video
Upload
Files

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.