Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

FrSky D8R-XP 2.4GHz (w / télémesure & CPPM)

Generating Links

FrSky D8R-XP 2.4GHz (w / télémesure & CPPM)

Prix:

Now save économisez 0,00 € 0,00 €

28,14 €
Statut:
Epuisé!
SKU:
D8R-XP
Livraison gratuite? Cliquez ici pour apprendre plus!

FrSky D8R-XP 2.4GHz (w / télémétrie)

Compatibilité:


Compatible avec FrSky deux voies modules de télémétrie: DFT, DJT, DHT, DHT-U

CPPM out


Spécification:


Dimension: 55 * 25 * 14mm
Poids: 12,4 g
Tension de fonctionnement Plage: 3.5V-10.0V
Courant de fonctionnement: 100mA
Plage de fonctionnement: 1.5km
Résolution: 3072 (> 11bit)

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

HyoJoon | Acheteur vérifié

  • Overall
  • Quality
  • Value

FrSky D8R-XP 2.4Ghz Receiver

Sep 19, 2018

Using FrSky Taranis X9D
I bought it for use on multi-copter.
We used one more, but we bought it for spare because of high reception ratio and ease of use.

ondrej | Acheteur vérifié

  • Overall
  • Quality
  • Value

CH5-8

Dec 10, 2016

Guys, when I connect CH3-4 with jumper (Need just RSSI for FPV OSD), the other channels CH5-8 are for direct servo connection?
Many thanks for answer

ondrej | Acheteur vérifié

  • Overall
  • Quality
  • Value

CH5-8

Dec 10, 2016

Guys, when I connect CH3-4 with jumper (Need just RSSI for FPV OSD), the other channels CH5-8 are for direct servo connection?
Many thanks for answer

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 10, 2016

Great price cant wait to install it

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 09, 2016

Really good receiver!

Jeffrey | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 21, 2016

I like this receiver; it works well. The only downside is that you cannot use 8 channels PPM without upgrading the firmware. And the upgrade requires an FrUSB-3 cable, plus a cable to match the FrUSB-3 to the receiver. Upgrading the firmware will give 27ms pulse width which will allow 8 channels.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 31, 2015

Great receiver. ... tested 1.6 miles fly .. never a glitch...

ErreuR | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 16, 2015

work well with frsky Djt telemetry module and 9rx radio

Maria | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 07, 2015

Overall a good receiver. The RSSi and PPM options are excellent and work great. Simple binding process with a Taranis on D8 mode. Telemetry catches up instantly, however it doesn't work properly. The analog inputs on the Rx fluctuate quite a bit (some times up to a full volt!) and when I used a voltage divider to measure the voltage on my lipo's the reading where not consistent even after calibrating to my multimeters. I will try digital telemetry later and post my results. Still a nice receiver.

William | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 03, 2015

Blown away by these receivers, the peace of mind that comes with RSSI telemetry warnings (on both our Taranis and 9XR) alone is worth the cost of entry over other FrSky receivers such as the V8R7. For very little weight cost, I can monitor main battery voltage with the FBVS01 on simple fixed wing, and with just one cable can pull full telemetry data over the digital port in conjunction with my Naze32 FC's. There's a type of data redundancy in that my telemetry data, sent to my transmitter and set to audibly alert me in case of exceeded parameters, will alert me to a situation I didn't notice on my OSD, and otherwise wouldn't have, until after the crash :)

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Fichiers clients
D8R-XP Manual Download [85]
EZosd RSSI Instal Download [1437]
D8RSP Manual Download [83]
RSSI outpin for the D8RSP Download [954]
Manual de Instruções para FrSky D8R-XP Download [86]
FLD-02 When A1 and x pins are jumped Download [252]
Manual de Instruções para FrSky D8R-XP Download [86]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!