Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Gemfan Hélice 5x4.5 Noir (CW / CCW) (2pcs)

Generating Links

Gemfan Hélice 5x4.5 Noir (CW / CCW) (2pcs)

Prix:

Now save économisez 0,00 € 0,00 €

1,02 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
329000343-0
Livraison gratuite? Cliquez ici pour apprendre plus!

GemFan Hélices ont établi la norme d'or dans la communauté Multirotor petite classe. Connu pour leur durabilité, leur grand équilibre et une superbe plaque tournante de centrage et de prix durables. Ils sont emballés comme un ensemble de 2, avec une rotation CW et une rotation anti-horaire. Il y a un large éventail d'options de couleurs qui peuvent être mélangés et combinés pour aider à l'orientation de multirotor. Ceci est la mise à niveau idéale pour toute petite multirotor.

Spécifications:
Taille: 5045 (5x4.5)
Couleur: Noir
Hub: 5mm (adaptateurs inclus pour 4mm, 3,17 mm et 3 mm)
Matériel: Carbon renforcé Nylon

Compris:
rotation 1 x CW
1 x CCW rotation
Adaptateurs

  • Propeller Diamètre X ( pouces ) 5.00
  • Emplacement Y ( pouces ) 4.50
  • Rotation CW/CCW
attributeset-13
Close

Dimension Diagram Guide

  • attributeset-13

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 23, 2016

cheap but great performance

Joshua | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 17, 2016

These props are very stiff and well shaped.
[WARNING] However, the structural integrity of these props are nearly impossible to verify after a crash. I was tuning PIDs for a 250 quad (using 2150kV MS Elite 'Mini Monster' motors and a 4S battery) and had a few rough landings. After the first prop broke, I carefully checked each prop after each flight, as they were snapping at the root.
I finally had the PID's tuned in to prevent oscillation at ~50pcnt throttle, so I tried gunning the throttle to see how it handled at ~80pcnt throttle.

In a split-second, 7 out of the 8 total blades on my quadcopter exploded / ripped apart mid-air and the quad fell to the ground. Some blades flew more than 10 meters, one blade had flown inwards and ripped ~4cm of heatshrink off the side of my video TX and one propeller was found in at least 3 pieces, split down the length of the blade into slivers.

While I cannot recommend these props for a quad using the same high-power motors and 4S battery setup, I do believe these props operate fine with a more moderate / 3S setup.

Here is a link to a video of the incident: https://www.youtube.com/watch?v=8Ut29iIa2xw

Alessandro Capon | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 10, 2015

toste. davvero toste

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!