Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Goteck HC2125T HV numérique MG Métal Cased Mini Servo 20g / 6,5 kg / 0.12sec

Generating Links

Goteck HC2125T HV numérique MG Métal Cased Mini Servo 20g / 6,5 kg / 0.12sec

Prix:

Now save économisez 0,00 € 0,00 €

19,33 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
573000012-0
Livraison gratuite? Cliquez ici pour apprendre plus!

La gamme Goteck de métal tubé mini-servos numériques sont là-haut parmi certains des meilleurs pour la qualité et la fiabilité à un prix qui offre un excellent rapport qualité-prix. Les cas sont usinés CNC solide en aluminium 6061, ce matériel de force pour le cas pour le montage et le train d'engrenages, il agit également comme un très bon dissipateur thermique pour le moteur et l'amplificateur.

Le HC2125T offre un métal de haute tension adaptée, métal tubé mini-servo numérique qui a un couple exceptionnel sans sacrifier trop de vitesse. Ceci est un servo idéal pour des avions ou des hélicoptères 3D 450 de taille, serait particulièrement bon sur les systèmes CCPM et flybarless. Ce servo est très heureux de fonctionner sur 6 ~ 7.4v qui le rend idéal pour exécuter directement à partir d'une batterie de LiPoly 2s.

Caractéristiques:
• usiné CNC 6061 boîtier en aluminium
• train d'engrenages en métal
• Moteur Coreless
• roulements à billes jumelles
• palonniers et vis de montage

Spécifications:
Type: HC2125T
Amplificateur: Numérique
Tension de fonctionnement: 6v ~ 7.4v
Couple: 5,5 kg @ 6v ~ @ 7.4v 6,5 kg
Vitesse: 0.13sec @ 6v ~ 0.12sec @ 7.4v
Courant de veille: 240mA @ 6v ~ 280mA @ 7.4v
Courir actuel: 1900mA @ 6v ~ 2200mA @ 7.4v
Dimensions: 23x12x27.5mm
Poids: 20g
Bande morte: 1 microseconde
Moteur: Coreless
Gears: Métal
Boîtier: aluminium 6061
Servo fiche: type JR
Servo plomb Longueur: 180mm

Compris:
servo 1 x Goteck HC2125T numérique
1 x Double corne servo
1 x Simple corne de servo
2 vis de montage

  • Servo Couple ( kg ) ( min . 0,01 kg ) 6.50
  • Servo Vitesse ( Sec / 60deg ) 0.12
  • Servo A (mm) 31.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 28.00
  • Servo D (mm) 12.00
  • Servo E ( mm ) 32.00
  • Servo F ( mm) 20.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

PeterAW | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 17, 2016

I bought a couple of these servos for their very high torque for one of my robots.
They really are powerful but when I unfortunately stalled one the output shaft broke.
On closer examination the shaft is 2.36 mm diameter but is bored out to 1.9 mm leaving a wall thickness of only 0.23 mm. Because I had removed the connector it is modified so I can't claim on the warranty. Worse still I can't find another servo of the same size with as good a torque so I am going to either have to buy another and hope that doesn't break or redesign my robot.

Mike23 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2016

I purchased 4 of these for my Viggen and two of them are fluttering widely on 6v (at random). I set the voltage back to 5.5v and the flutter has stopped however they should run up to 7.4v! The bec im using says its 20a and as far as i know shouldn't be a problem. Any idea? If i need to replace these two my hard work on the wing will be ruined! I should also mention i plugged them directly into the receiver and the problem is still there (I was thinking it was the extension lead).

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 22, 2015

damn good servo would recommend these to others looking for good preforming servos, no slop in gears

spad7 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2015

I installed 4 of these servos in a 3D plane. 2 of 4 have a huge shift of the central position, more than 5 mm on a flap and more than 10 mm on the elevon. So the plane is impossible to pilot. I regret thisinvestment which makes me waste my time and my money. I give 1 star because I cannot give 0.

SMPRC | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 23, 2015

I purchased only one Goteck HC2125T as a test to see what my money buys. Except for the deadband being 5X wider (that's a bad thing) than advertized, I'm highly impressed with this servo. It's only been on the bench and run at 5.5V but what I see makes me feel good about the purchase. It's a metal gear (steel for last two gears) servo but as new there's no discernible backlash at all. Should hold up very well. The output shaft spline is 100pcnt compatible with arms made for Hitec micro servos such as the HS56 and HS65. This gives great flexibility with regards to arm shape choices and stiffness, something this Goteck HC2125T really needs when the full voltage is being applied. It's a brute for its size!

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!