GWS EDF Rotor pour 30mm système (EDF30)

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 20, 2011

thinking about pairing this with the 1230 or 1220 inrunners

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 22, 2011

These are the GWS 30mm EDF1220x6 rotor and accept a 1mm motor shaft for press fit.

Excellent high quality genuine GWS product.

These are 6-bladed however can be easily modified to 3-blade and used in conjunction with the Turnigy 1015 motor on 2S.

• Overall
• Quality
• Value

Customer Rated

May 08, 2011

This blade is perfect for the Turnigy 1015 Brushless Inrunner Motor 11500k. It fits perfectly well on the shaft, and the power is enough to Power an Indoor Pylon Jet. I recommend 1 Cell ~200 mAh LiPO Cell for this blade. The housing can also pe purchased here on Hobbycity.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 08, 2011

Top Preis und Originalware von GWS. Kostet in DE wesentlich mehr, sofern der Haendler diesen Kleinkram ueberhaupt zu liegen hat. Und dann ist der Versand aus HK billiger als aus DE....

Danke HK

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 13, 2010

I used this with the GWS EDF30 and the Turnigy 1015 11000kv inrunner. The impeller connects to the shaft of the motor by friction. On 1s it is able to retain however on 2s it flies off and hence you may need CA to secure it. Furthermore on 2s with the motor aforementioned you can cut half the blades off to reduce the load and heating. Cheers.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 24, 2010

Correcta presentacion. Muy bien acabada igual al original.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2010

Seems to be balanced well,nice push fit on shaft

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 02, 2009

The impeller is well built and rigid, but you should have a prop reamer on hand because if you insert the 1mm shaft, the hole can become even more off centered. Only 3 of the 5 i ordered were decently centered.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 17, 2009

Balanced very well, and light

• Overall
• Quality
• Value

Customer Rated

Sep 01, 2009

Wasn't expecting much from such a small thing, but it seems to pair great with the shroud. A 1mm shaft pager type motor produces excellent results for what that is, on 4xNi-Cd batteries. Impeller snugly fits and displays no looseness after a few reseats on different motors. No problems or issues.