Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

H-roi High Performance Racer Série - Edge 540 V3 Kit w / Servo

Generating Links

H-roi High Performance Racer Série - Edge 540 V3 Kit w / Servo

Prix:

Now save économisez 0,00 € 0,00 €

78,45 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9087000004
Livraison gratuite? Cliquez ici pour apprendre plus!

La série unique et très brillant HobbyKing Racer a été développé avec deux choses à l'esprit .... haute performance et des quantités massives de plaisir!

La bonne cellule à la recherche est en mousse EPO super résistant et est fortement ré-renforcé avec des tiges des FC, chaque version est bien fini dans un système authentique de couleur. Une des premières choses que vous remarquez avec cette série est la construction modulaire bien conçu, les ailes et le stabilisateur horizontal littéralement emboîtent faire l'assemblage et des pièces de rechange simple et rapide. Pas de colle est nécessaire pour l'assemblage, l'empennage vertical et dur sous-chariot vis simplement et les servos ont été pré-installé. Lorsque vous regardez autour de ces modèles brillants, vous pouvez voir qu'ils ont été construits pour la performance, tant en termes de vitesse et de capacité de voltige, les surfaces de contrôle sont entièrement articulés et l'aile / empenage de montage sont lourds pour faire face à haut G manoeuvres . Cette superbe version ARF priced vous permet d'utiliser le train électrique de votre choix, offrant un potentiel énorme pour tout ce que vous accélérez les freaks!

Caractéristiques:
Robuste Construction OEB
Joliment fini Schéma d'échelle, Authentic
Haute performance modèle, à la fois rapide et Voltige
Rapide et simple à assembler Gracieuseté de conception modulaire
Voir toutes les Servo pré-installé
Surfaces de contrôle entièrement charnières
Version ARF est parfait pour ceux qui veulent construire une version Ultra Haute Performance
L'utilisation intensive de tiges FC dans toutes les surfaces volantes et Fuselage
Lourd Undercarriage Duty avec pneus en caoutchouc capables de traiter le plus rugueux des bandes
Peut être lancé à la main

Comprend:
Instructions
Outils
Hook & boucle de bande
Y-Lead
Fileur
7x6 Prop

Spécifications:
Envergure: 800mm
Longueur: 710mm
Voler Poids: 650g
Wing Zone: 8.3dm2
Servo: 9g x 4

A besoin:
Votre propre 4 canaux TX / RX
1800mAh 4s Lipoly
4s 28mm Brushless Outrunner Capable
30A ~ 40A ESC w / BEC

Nous avons une sélection complète de pièces de haute performance Racer Series

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Ray | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2015

Received mine a week ago and finally got around to putting it together. And WOW how simple it was. all locked together really well and rigid, love this design. I decided to use a 2200kv 28ntm motor 60amp ESC and a 9x4 prop. Wheels are useles on anything other than tarmac or really short smooth grass so i did away with them. First flight i made sure everything was straight and tru and had my throws at 60 and expo at 50. COG was about 35mm with 3s 2200mah. pulled out of my hand at 60pcnt throttled and shot off into the sky and virtually out of sight within seconds. Flys very good and tru but not for beginners!!! very fast on 3s but on 4s its a rocket. unlimited vertical!!! Brilliant plane for speed but not for 3d. Very fun. Have to land it fast or it will stall. Super happy. Now just need more batteries!!!!!

Docspace | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 02, 2014

Plane is a quick assemble model, fitted a 2300kv 2836 NTM outrunner 50A Hobbyking ESC an 4.75x4.75 Sports prop, 2200mah 4s, getting 5minutes flight time with a minute up your selve if you need to take another landing approach,overall 2/5

morfaihus | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 14, 2014

super avion en EPO hk ils ont bien assurer petite modification sur support moteur mais sa le vol est saint trs vif sur les ailes; dcollage trs realiste que dire merci

kiel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 27, 2013

This is a really great plane. I am running an NTM 2700kv at 700w with a 7x4 and it is fast. You need a lot of room to fly because it will fly 100mph but can also come in pretty slow on the belly. Throw away the gear and hand launch straight up. The frame is super, super strong and will take almost any hard landing you give it. I bounced it on a low pass at 100mph and thought it was lost. A new prop and a little CA on the firewall and I was flying good as new. I even took a tree trunk on a park landing at 35pmh and the breakaway wings saved the plane once again. I am thinking of buying another and running more motor, prop and ESC. A

kc135boomer | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2013

Great airplane! I put a NP 800mm warbird motor in it, 30A ESC, 4S 30C 1600mAh battery and let her rip.How about 127mph on the HK doppler app! Do not let it get slow as it will stall but the flight performance is amazing. This is one fun airplane!!!!

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 20, 2013

i just got this plane in the mail on 7-17-13 and yesterday i took it up for the maiden flight and low and be hold it was to tail heavy i went buy the instructions as to were to balance it and it has to be wrong where the book said to balance it i had to add a 1/2 once of weight and that is incorrect it is right before the wing spar not after like the book says so to anybody that buys one of these be shur to not go by the book on balanceing i almost put that new plain right into the ground it tiped stalled bad when makeing a turn luckly i recovered it twice to set it down in some tall grass and after all that the prop broke landing in tall grass tis is not a bad revue im just trying to help the next person that buys this plane i like it its nice for the price good luck

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 18, 2013

It is a really well Build Plain! Couple of crashes , Still Flies like a beauty !

ichichich | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2013

Gute Qualitt, alles passgenau und schnell zusammengesteckt.
berraschend unkritisch bei Start und Landung!
mit NTM 2836-2200 und 3s2200 Akku geht der Standardprop sehr gut, mit dem NTM2836-2700, 4s1800 und APC 4.75x4.75 brennt die Luft.
Ohne Fahrwerk kann man noch ein paar km/h rausholen.
Servos sind ok, da kann man aber noch tunen.

Rothmans | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 21, 2013

I had received this High Performance Racer Series - Edge 540 V3. This plane is for high speed plane, not suitable for beginner.

F100CUFFLINK | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2013

just got the plane in today after about 10 days (USA WAREHOUSE). CAme packed very well no damage at all,this is ver simalar to the carbon z yak i thinkits the same foad ,high density and strong ,you wont be dissapointed in this plane qualiy just as good as e flite, i havent tryed any of the servo;s yet will have to check them out and ts winter here so have to wait for the good weather. i like this very much i think its part of the high performance series (high speed ) i have the AT6 of the same nature ,and there very fast also. ALthough therre is no motor or esc ,that is left for you to get ,im going to go all out with speed.

Ithinkif anyone gets thjis they will be very pleased with it .

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires