S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

Harrier 70mm EDF Jet - 780mm (ARF)

Harrier 70mm EDF Jet - 780mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
3460 g
SKU:
H803-KIT

Combinez

et économisez plus
battery
servo
motor
acc
Description
du

Le Hawker Harrier était depuis de nombreuses années, les mondes que VTOL jet avions de chasse / de grève et a été conçu pour fonctionner à partir de pistes d'atterrissage marque de décalage qui ne sont pas vulnérables contre les attaques aériennes. La variante Sea Harrier trouvé renommée mondiale pendant le conflit des Malouines où il fait taire les critiques avec son impressionnante performance du combat. Récemment pris sa retraite après 40 ans de service, est maintenant votre chance de voler cette légende de l'aviation militaire.

Ceci est un grand modèle qui semble si impressionnant dans l'air, il est livré avec option fixe sous-chariot mais il est si facile de lancement de la main en raison de son poids léger et le chargement de l'aile lumière, il peut être piloté presque partout.

Ce Harrier Sea flys donc très bien et est très facile à vivre, nous parlons de l'expérience d'avoir eu beaucoup, beaucoup de vols avec celui-ci, un sujet inhabituel et une taille impressionnante qui fera tourner les têtes à tout terrain de vol.

Spec.
Envergure: 780mm
Longueur: 1250mm
Poids: 650g
Moteur: 2826-2800 kv Brushless Outrunner (obligatoire)
EDF Unité: 70mm (Inclus)
ESC: 40A (obligatoire)
Servos: 3x9g (obligatoire)

Obligatoire:
40A ESC
3 x 9gram
2826-2800kv moteur Brushless
TX & RX
4S1P 14.8v 2200 ~ 2650 Lipoly

Product
Specifications

Informations supplémentaires

  • Référence:
    H803-KIT
  • Brand:
    Non communiqué
  • Poids (g)
    3460.00
  • Longueur
    940.00
  • Largeur:
    240.00
  • Taille:
    440.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Buy one of these if you love to build. This is a builders dream. I have cut out and made my exhaust shoot straight out. Added a retracts nose gear and a glider retract in the rear. Tons of room. Still working on the model and will post photos of it when I'm done. I don't expect to go fast with this plane. But just nice speeds with a cool look. No VTOL at all. I'll wait until someone comes up with that fly able plane. If you are in the USA! I got mine in 12 days!!!! Get one. You won't be disappointed unless you just want to plug and fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received the model with some damage to leading edge of the wing which required some filling and there were a few minor dings and dents on the top of the fuselage. The model is not EPO foam so dents easily. I installed a Dr Mad 70mm fan and turnigy 60amp ESC. With a Turnigy Nano 2200mah (35C) installed in nose compartment as far back as it will go, the model balances within CofG limits. I have been flying the jet off grass with the wheels on and it does takes a fair bit of runway to get airborne. Due to the location of the exhaust outlets (slightly angled), it does take lots of power to keep it flying which results in short flights of 2.5 min on my current pack. I also had to add a small hole in the bottom of the fuselage, just forward of the nose gear to get some cooling air into the batter compartment and a small stringer in the horizontal tail wings as they were very flimsy. Once you get it in the air it is relatively stable for an aircraft with an anhedral wing. Although it is not a very fast flyer, it definitely does have the cool factor when you bring it to the flying field. For the price it is worth it to add one to your RC fleet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This aircraft flies really well on the HK reccomended motor and battery combo, however, needs a few mods.
The hinges on the ailerons and elevators are terrible, I wouldn't trust them to hold up to even 1 flight. I replaced mine with proper pinned hinges. The elevator pushrods were kinked inside and also needed replacing. I also relocated the LiPo to the centre compartment and used 2x 2S wired in series either side of the fan unit to help get the CG in limits.
It flies well with no nasty surprises despite the swept anhedral wing and slows down nicely for landing without tip stalling
https://www.youtube.com/watch?v=1S1zg-slvfA
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
battery
servo
motor
acc