New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Hawker Hunter 70mm EDF Jet 6s w / Retracts & Flaps WSR (PNF)

Hawker Hunter 70mm EDF Jet 6s w / Retracts & Flaps WSR (PNF)

Discontinued Product

Please continue searching for a similar product.
Poids
3385 g
SKU:
HAWK-H-PNP-W
WANT FREE SHIPPING? Click here to find out more!

Le Hawker Hunter était UKs premier balayé combattant de l'aile et a été un énorme succès exploité par de nombreux aviations accross le monde. Conçu par le brillant Sir Sydney Camm, le chasseur était certainement l'un des meilleurs jets à la recherche de son âge et a continué à briser plusieurs records dont le record du monde de vitesse en 1953, un autre record étonnant a été réglé lorsque 22 chasseurs ont été bouclés dans la formation! Le chasseur était toujours utilisé en tant que formateur à droite dans les années 1990 et est entré dans l'Histoire comme l'un des plus réussis et les plus esthétiques combattants de l'ère de la guerre froide.

Cette échelle très et superbement modèle fini est Plug N Fly, et comprend tous les servos pré-installés et tout métal / spiral rétractent pré-équipés. L'unité de ventilation en alliage pré-équipée est ultra haute qualité, très puissant, ultra lisse, fiable et efficace, sur le Lipoly reccomended cette unité produit environ 1700g de poussée. Une ESC OPTO est également pré-équipé d'un 5A UBEC pour alimenter RX. Bien que pas difficile de construire, le chasseur est un peu plus compliqué que certains modèles PNF. La conception est intelligente, chaque section étant complété comme un «module».

Le son doux et soyeux de l'unité de ventilateur pré-installé sur 6s doit être entendu pour le croire. Ce modèle vole comme il est sur les rails, et combine la vitesse avec la stabilité et de l'élégance, il est également un jeu d'enfant à la terre grâce aux volets pré-installés fendues. Cette Hunter allie qualité et performance avec rotation de la tête de bons regards et est sûr de vous démarquer dans le domaine de vol.

Spécifications:
Envergure: 866mm
Longueur: 1157mm
Voler Poids: 1500g
EDF: 70mm alliage avec 2399kv Brushless Inrunner Motor 6s
ESC: 60A OPTO ESC Entièrement programmable
Servo: 9 x High Torque Sub Servo Micro
RX Puissance: HV UBEC réglable Sortie 5v / 6v

Comprend:
Tous les Stickers Hardware &
Instruction Photo Book
Figure Pilot
Servo Extension & Y-Leads

A besoin:
Your Own TX / RX 6 canaux
6s 2200mAh ~ 2650mAh 6s Lipoly Batterie

  • UGS HAWK-H-PNP-W
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 3385.00
  • Longueur 1155.00
  • Largeur 250.00
  • la taille 300.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Pros: This is a typical Rc Lander plane. Lots of pieces and lots of steps with epoxy. Quality is excellent and all the parts fit together well. The paint is done well and and look really good. The cheater hole is covered with a solid piece of plastic and there is plenty of power.
Cons:I really wish this was a 4s system. The battery bay is really small and I'm having a hard time imagining a 6s pack in there, So plan on 2 3s packs. Lander, obviously thinks this is the way to go too as there is a series plug included (BTW everything is Deans T connectors, which is what I use). So, don't expect long flight times. THE BIGGEST disappointment is the manual retracts. They work fine (and are pre-setup) but I have to think Rc Lander has a ton of left over manual retracts to off load instead of including their nice electronic retracts. Fortunately, they seem tough and I had a set on my Lander F-16 and Panther and they held up fine.

If you've ever owned a Lander plane, no surprises here. If not, this is a lot more work than other EDFs on the market but in the end you get a very high quality plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pros: This is a typical Rc Lander plane. Lots of pieces and lots of steps with epoxy. Quality is excellent and all the parts fit together well. The paint is done well and and look really good. The cheater hole is covered with a solid piece of plastic and there is plenty of power.
Cons:I really wish this was a 4s system. The battery bay is really small and I'm having a hard time imagining a 6s pack in there, So plan on 2 3s packs. Lander, obviously thinks this is the way to go too as there is a series plug included (BTW everything is Deans T connectors, which is what I use). So, don't expect long flight times. THE BIGGEST disappointment is the manual retracts. They work fine (and are pre-setup) but I have to think Rc Lander has a ton of left over manual retracts to off load instead of including their nice electronic retracts. Fortunately, they seem tough and I had a set on my Lander F-16 and Panther and they held up fine.

If you've ever owned a Lander plane, no surprises here. If not, this is a lot more work than other EDFs on the market but in the end you get a very high quality plane.

Plane looks great! I am very pleased to see that hobbyking are beginning to get in some jets that are your average run of the mill!! good to see some other jets coming through!! maybe one day hobbyking might be selling the Saab Viggen....one can dream!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane looks great! I am very pleased to see that hobbyking are beginning to get in some jets that are your average run of the mill!! good to see some other jets coming through!! maybe one day hobbyking might be selling the Saab Viggen....one can dream!

Fantastic jet, brought direct from a UK model shop. Flying weight stated as 1500g but mine came at 2300g with all the hardware included with the kit. Running mine on a 3200mah 35c 6s lipo and getting 850w. Good fast flight but not much vertical performance. Tends to tip stall and due to the high wing loading it comes in like a brick. Flys like it is on rails. I took all the undercarriage out and flaps and rudder to reduce weight and measured at 105 mph level flight. Fantastic jet well worth the money, but the elevator linkage needs sorting as the metal rod bends and deforms under pressure. Great aircraft and at a fantastic price, mine cosst 400 to get up so a real steal at this price!! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic jet, brought direct from a UK model shop. Flying weight stated as 1500g but mine came at 2300g with all the hardware included with the kit. Running mine on a 3200mah 35c 6s lipo and getting 850w. Good fast flight but not much vertical performance. Tends to tip stall and due to the high wing loading it comes in like a brick. Flys like it is on rails. I took all the undercarriage out and flaps and rudder to reduce weight and measured at 105 mph level flight. Fantastic jet well worth the money, but the elevator linkage needs sorting as the metal rod bends and deforms under pressure. Great aircraft and at a fantastic price, mine cosst 400 to get up so a real steal at this price!! :)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save