S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

HD3010-2100KV Indoor / Profil / F3P Outrunner Motor

HD3010-2100KV Indoor / Profil / F3P Outrunner Motor

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
48 g
SKU:
HD3010-2100
Description
du

Ces superbes petits moteurs shockie offrent d'excellentes performances et une grande valeur pour l'argent. blessure à la main et l'équilibre de ces moteurs de poids super léger sont fantastiques pour le plus léger de profil 3D et F3P modèles d'intérieur légers. Equipé d'or 2mm plaqué bouchons de balles et un moteur en fibre de carbone super léger monte ces moteurs sont prêts à cheviller et à enlever!

Caractéristiques
Conception légère.
support moteur solide et léger CF.
Pré-installé connecteurs dorés 2mm.
Construit en saver prop.

Specs.
RPM / kv: 2100
Idle: 1.5A
LiPoly: 2 ~ 3s
Courant max: 10.9A
ESC: 12A
Prop suggérée: 9x5
Thrust: 330g
Taille de l' arbre: 3mm
Poids: 19,6 g (poids réel , y compris les fils et connecteurs)
Dimensions de montage: 35mm x 35mm

Comprend.
3 x Connecteur femelle 2mm
2 bandes saver x Prop
1 x CF Support moteur
3 x prédécoupé shrink tubes

Product
Specifications

Informations supplémentaires

  • Référence:
    HD3010-2100
  • Brand:
    Non
  • Poids (g)
    48.00
  • Longueur
    118.00
  • Largeur:
    26.00
  • Taille:
    47.00
  • Kv ( rpm / v)
    2100.00
  • Max Currents (A)
    10.90
  • (W ):
    76.00
  • Longueur B ( mm ):
    15.00
  • Longueur Can D ( mm )
    6.00
  • Max Tension (V)
    11.00
  • Arbre A ( mm ):
    3.00
  • Unit Weight (g):
    19.6
  • Diamètre C ( mm )
    30.00
  • Longueur totale E ( mm )
    22.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I intended to use this with a e-flite nieuport. connected to zippy 800mah 2s 20c and a plush 10a esc. Startup up was jerky and abrubt. Tried a HK red brick 10a still same problem. Same with HK 8/10amp. Replaced motor with turnigy park flyer 250 of 2200kv. Big difference. Nice and silky smooth with plenty of power with all three of my tested esc's. Although it looks pretty and appears well made I still can't recommend this red HK motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super moteur tres bien conditionn avec les accessoires
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tried a 8x4 gws on 3 cell .....15 amps and hot motor. Had to go down to a 6x 3 prop on 3 cell and it would rip the little prop had to really stay on the throttle. Finally tried a 8x4 on a 2 cell and good performance I think it was at 10 amps. Next time out I will try a 9x4.7 on the 2 cell and see what I get. I would buy another one for a crack yak or 7 oz or less airframe with the 8x4 prop. It would be super on a 6oz plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very compact and lightweight. I used this motor in a pusher configuration powered by a Turnigy 3S 800mAh 35-45C battery through a Turnigy Plush 12Amp ESC, spinning an orange GWS 8x4.3 prop.
It has great responsive power! But don't expect the motor to last if you don't manage your throttle usage appropriately.
In hindsight, I may have been able to avoid burning up two of these already by evaluating my setup with a watt meter first.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this in my 3d profile scratch build. Great little motor and very strong built.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It took me a while to figure out the slowfly APC prop is the best. The GWS 8x4 was my first choice, but the hub on the motor is too small. I had to use the busing that came with the 8x4.7 slow fly apc prop and then after insertion, drill it out. Now the hub sits on the motor very well and with a tight O-ring, the balance is amazing. The trust is great and the motor flys warm on 2S as I 3D fly a 290 gram biplane from TechOne. I don't recommend any prop larger than the 8x4.7 as it will heat up the motor instantly. Super light and powerful, just be sure you get a tight prop fitting.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good Motor ...........................................................................................................................................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gewicht 19,27g inkl. Kabel(5cm)und 2mm Goldkontaktstecker

Prop-mitnehmer etwas lockerer Sitz fuer GWS (zB.7x6)

28 Statoren - besonders ruhiger Lauf, sehr hochwertige, sehr leichte Ausfuehrung ideal fuer 150-200g Schockflyer
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got one, very well machined, weight is true, relatively clean windings.
Didn't measure thrust yet but feels good!
I plan to use it with a techone spirit, keep you updated...
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.