Hesper-1 3D PPE - Incassable (KIT)

• Overall
• Quality
• Value

Customer Rated

Feb 10, 2015

I am currently assembling this plane; I think it would be quite difficult to build for those without any building experience, as the manual is very poor. Also, the exact placement of rigidifying carbon sticks and landing gear is left to the knowledge of the builder. Don't try this plane if you have no experience building and flying shockies. Otherwise, good value; haven't flown it yet but I expect no problems there.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 22, 2014

Trs belle machine, marche trs fort

Finition superbe, trs solide, prix super dmentiel 19.

Config : Moteur Turnigy 2204 14T plus Fluorescent 8043 Slow Fly Propeller plus ESC 10A Turnigy Plush plus Lipo Zippy compact 500mA.

servos Hobby King S0361 3.6g

Recepteur Turnigy XR7000S.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 03, 2014

so cheap and durable, if you break it glue it, if it can be repeird anymore, buy another one

• Overall
• Quality
• Value

Customer Rated

Nov 20, 2013

good quality, perfect fitting of the parts, no good manual, experience in building up a park flyer is necessary. to heavy for indoor (over 200 gramms) better fot outdoor with no wind.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 03, 2013

try to learn with this plane.

Easy to assemble. But i managed to crack the epp a few times now. I am a beginner and ground ramming is part of a flight session :P

• Overall
• Quality
• Value

Customer Rated

Jun 08, 2012

Absolutely amazing! This plane is my first profile foamie, so I don't have much to compare it to, but I think it's so good that I honestly don't know why you'd want to spend more than $21 on a plane like this! The foam was straight and well cut. The hardware was good except didn't quite have enough carbon rod for all the bracing. The manual is not amazing, but a bit of common sense will get you through. Initial RTF weight was 230g. It probably weighs more now as I use it to practice 3D, and have crashed it probably 80 times and made some repairs. It's super strong, but when it does break, super easy to fix. I use 2205c 1400kv motor, Turnigy Plush 10a esc, TP 9x4.7 prop, OrangeRx R410 rx, 3x HX500 servos and Nanotech 460mAh 3s LiPo. Flies beautifully, heaps of power, and has really helped me improve my 3D. Will defo buy another when I retire my current Hesper!

• Overall
• Quality
• Value

Customer Rated

Sep 25, 2011

quando de diz inquebrvel, imagina-se que realmente no quebraria to facilmente, o que no totalmente verdade.
muito flcido aps montado.
bonitinho voa at que bem, mais tem que se tomar cuidado quanto a ser inquebravel
nota 03

• Overall
• Quality
• Value

Customer Rated

Aug 26, 2011

Very good plane... It takes a long time to build (I'm a rookie).
Only 4 stars because there were not four rods, two rods to fix the line at the top and two rods for the ailerons.
It would be perfect if it had adjustable clevis or control horn and micro hinges as Piaget.
Use this glue SKU: OR033-00 601 for foam and thermal glue for the rods.

Muy buen avin... Lleva mucho tiempo construirlo (soy novato).
Slo 4 estrellas porque faltaban 4 varillas, dos varillas para fijar la cola en la parte superior y dos varillas para los alerones.
Sera perfecto si tuviera adjustable control horn o clevis y micro hinges como el Piaget.
Usa este pegamente SKU: OR033-00601 y silicona caliente para las varillas.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 26, 2011

Very good plane... It takes a long time to build (I'm a rookie).

Only 4 stars because there were not four rods, two rods to fix the line at the top and two rods for the ailerons.

It would be perfect if it had adjustable clevis or control horn and micro hinges as Piaget.

Use this glue SKU: OR033-00 601 for foam and thermal glue for the rods.



Muy buen avin... Lleva mucho tiempo construirlo (soy novato).

Slo 4 estrellas porque faltaban 4 varillas, dos varillas para fijar la cola en la parte superior y dos varillas para los alerones.

Sera perfecto si tuviera adjustable control horn o clevis y micro hinges como el Piaget.

Usa este pegamente SKU: OR033-00601 y silicona caliente para las varillas.

• Overall
• Quality
• Value

Customer Rated

Jul 03, 2011

I begin to fly on this plane on the school stadium.
Weight of my model is about 200gr without battery. Little hard for "Indoor model".
Motor is 2205, ESC - HobbyKing SS 10A, propeller - 9x4,7. If throtlle stick little than 1/3 - go down... Flying near 1/2 throttle from maximum.

My be, I change motor to 2204 and will to fly with battery 360 mAh - in "Indoor" version.