S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

hexTronik DT750 Brushless Outrunner 750KV

hexTronik DT750 Brushless Outrunner 750KV

QTY:

Now save enregistrer 0,00 € 0,00 €

11,54 €
Rating:
Stock:
Poids
79 g
SKU:
DT750

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Les apparences peuvent être trompeuses. Cette outrunner est d'environ deux fois la taille d'un moteur towerpro de cloche, et balance un accessoire beaucoup plus grande. Son moteur utilisé sur certains d'Art-techs nouveaux kits d'avion, qui est testiment à sa durabilité, la facilité d'utilisation et la qualité.
Le DT700 balancera un 11x4.7 SF prop bien, pour produire plus de 900g de poussée.
Son grand pour les grandes foamies GWS ou des avions parkfly.

Spec.
Tension requise: 11.1v
Suggérée Capacité de la batterie: 1300mAh +
Suggestion Prop: 11x3.8 ou 11x4.7
tirage Max courant: 18A (avec 11x4.7 prop)
poussée Max: 1000g +
Non Courant de charge: 1.4A
Shaft: 4M (parfaitement adapté à Towerpor / GWS SF accessoires Fly lent)
Poids: 78g
Diamètre: 41mm
Longueur totale: 77mm
Kv: 750rpm / v
Livré avec support comme indiqué dans l'image

Rapport de test.
Nous avons utilisé le outrunner DAT700 pour alimenter l'un Art-tech Pitts. Exécuter avec un pack 1300mAh 3S1P 20C, 18A BESC et 1147 GWS / TowerPro prop, les pitts Art-tech couru bien. Excellente taux de montée, mais pas hoverable, et avec des temps de vol 13minute ou plus, nous avons été très impressionnés.
Un outrunner très efficace pour les modèles volants lents jusqu'à .15 taille.

Product
Specifications

Informations supplémentaires

  • Référence:
    DT750
  • Brand:
    Non
  • Poids (g)
    79.00
  • Longueur
    88.00
  • Largeur:
    45.00
  • Taille:
    51.00
  • Kv ( rpm / v)
    Non
  • Max Currents (A)
    Non
  • (W ):
    Non
  • Longueur B ( mm ):
    Non
  • Longueur Can D ( mm )
    Non
  • Max Tension (V)
    Non
  • Arbre A ( mm ):
    Non
  • Unit Weight (g):
    78
  • Diamètre C ( mm )
    Non
  • Longueur totale E ( mm )
    Non
  • Résistance ( mh ):
    Non
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length
Quality
Value
Overall
Quality
Value
Overall
A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.
Quality
Value
Overall
Quality
Value
Overall
Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

Quality
Value
Overall
Quality
Value
Overall
Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

Quality
Value
Overall
Quality
Value
Overall
Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!
Quality
Value
Overall
Quality
Value
Overall
Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.
Quality
Value
Overall
Quality
Value
Overall
propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.
Quality
Value
Overall
Quality
Value
Overall
DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

Quality
Value
Overall
Quality
Value
Overall
Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!
Quality
Value
Overall
Quality
Value
Overall
Lots of power to pull my home made foam board projects.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.