S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

HGD numérique 260HB CarbonGear Servo 16g / 0,12 / 2,0 kg

HGD numérique 260HB CarbonGear Servo 16g / 0,12 / 2,0 kg

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
51 g
SKU:
HGD-260HB

Combinez

et économisez plus
acc
Description
du

HGD Digital Servo 2,0 kg
Fabriqué en Corée, la gamme INO-LAB de servos offrent une excellente qualité, de précision et de fiabilité.
Haute précision, la précision numérique et longue durée de vie en font un excellent choix pour les petits dépliants 3D.

Caractéristiques;
Haute vitesse
Gears carbone.
Balle support de roulement
Excellent pour les dépliants du parc et shockflyers.
Alliage radiateur permet potentiomètre et le refroidissement du moteur.

Spec.
Vitesse: .12sec / 60deg
Stall Couple: 2,4 kg
Dynamique: 2,0 kg
Poids: 16,9 g
Taille: 38x30x13mm

Product
Specifications

Informations supplémentaires

  • Référence:
    HGD-260HB
  • Brand:
    Non communiqué
  • Poids (g)
    51.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Vitesse ( Sec / 60deg )
    0.12
  • Couple ( kg ) ( min . 0,01 kg )
    2.00
  • Unit Weight (g):
    16
  • A (mm):
    39.00
  • B ( mm )
    31.00
  • C ( mm )
    32.00
  • D (mm):
    14.00
  • E ( mm ):
    41.00
  • F ( mm)
    20.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Had a nasty crash with these that bent the pitch arms on an RJX head threw both links off never to be found and bent the aileron and rudder links, broke off the tailboom and snapped off the battery tray off. Two of them had gears with bent, but not stripped, teeth after this. They were still functional but felt "gritty". The gear that was damaged was the lower middle gear in both cases, all other gears were undamaged. Replaced them with HG-D261 gears (exact same gear set is used by both servos)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using these as cyclics in a 450 sport with the Tarot modified upper frame panels for midsized servos. You have to mount them on the inside to get straight links, elevator link will also be crooked (don't waste time trying to mount the elevator servo on the inside to get a straight link, it'll still be crooked and you'll have wasted 4 hours tearing the helicopter's back end apart and putting it back together again). Can't use the eyelets if you use them for this because they wobble too much. I used the rubber grommet and an M2x10 screw from the outside with an M2 washer and a nut behind the tabs. hold the nut and turn screw till the washer and nut touch the gromet, then let it go and turn the screw alone and friction will tighten the nut and hold the servo securely but self limit the torque so it won't damage the mounting tabs. Using these with te RJX clone head and a Robird G31 and they work great, the amount of torque they put into the blades is amazing for a 450.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bad luck with these servo's , 2 pieces , both with defective electronics.
InoLab have clearely no quality control .
InoLab never again !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Customer really can't make an intelligent decision from Hobby City's published data, or customer feedback with no credibility. Therefore, one must rely on manufacturers's supoort. This is where Ino Lab fails miserably, trying to market their product without letting customer know what they're buying into.

I would never consider thier product for this reason, even if product was free for I'm also charged with exhorbitant shipping cost from Hobby City. Worst experience I've encountered.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You can use the spare gear from the robbe fs 550 speed carbon digital servo.It fits 100 to HGD digital 260HB servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are just awesome . I am using 6 of them in my EFlite ultrastick 25e , centre excellent and I have had no issues whatsoever even with a life reciever pack delivering 6.6v no issues. I have ordered more and will continue with inolab thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
really great servo, really smooth and powerfulll
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recomended for 450 size helis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In Normal Servo mode, it's fine. I was hopeing to take advantage of the "Digital" performance but I may need to try another Gyro capable of digital servos to see if it isn't my gyro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The servo ears did not fit perfectly on this heli though, but with a little trick and common sense, one can fix the problem quite easily.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.