S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

le système contre Rotating Micro BL HK-13DZ

le système contre Rotating Micro BL HK-13DZ

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
35 g
SKU:
HK-13DZ-CM
Description
du
Impressionnant système de mini-moteur de contre-rotation.
Crée presque deux fois la poussée système similaire moteur unique de taille
Une façon intéressante d'améliorer tous les modèles caractéristiques de vol.
Usine Spec.
Kv: 2000rpm / v
Lipo Range: 2S 7.4V
prop suggérée: 5030
Courant max: 0.2Ax2
Burst actuelle (5sec): 3Ax2
Poids: 13g (y compris montage et le fil)
trou Prop: 3 / 5mm
Dimensions: 24 x 13mm

Données de test:
5030 prop (recommandé)
Tension: 7V
Courant: 2.2Ax2
Thrust: 180g
Product
Specifications

Informations supplémentaires

  • Référence:
    HK-13DZ-CM
  • Brand:
    Non communiqué
  • Poids (g)
    35.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The best motor for mini models... it true
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The 2 wires shown are actually 3 wires each. The separate wires are delicate and solid so do not bend them a lot or they will break. The mounting holes are tiny and will call for a precision mounting setup with TINY screws. I used 2-56's and still had to grind the side of the heads to clear the rotating motor shell. LOTS of thrust. I used a 9A controller for my tests and no heat was generated but lots of wind. Difficult to mount.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
each of the 2 wires has the 3 wires for the esc..

nicely made am trying for a miniVTOL type machine!!!

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Little jewel! Here's bits from a review I have put at

USUALPREFIX[DOT]rcgroups[DOT]com[SLASH]forums[SLASH]showthread[DOT]php?t=1118210



The HC thrust spec of 180g at 7V and 4.4Amps is optimistic. I got 150g at 8V and 4.7Amps approx. The 5x3 3 bladers supplied are a good match for this motor and draw just over 2.3A on a fresh battery. You CAN'T use the "Related Products" ESC HC recommend. It will only survive 1S voltage. Use the Turnigy 6A ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The description is incomplete. Does the system include ESC/BEC? Photo shows only 2 wireskinda weired for brushless system, isn't it?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The package includes the two propellers as shown a counter rotating 5030x3 pair.



Motor = 13.73g

Prop = 2.32g each piece.



i.e. Total counter rotating system = 18.35g



Testing for thrust, amp draw, rpm etc will be undertaken soon and I will release the results asap.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.