Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HK-500CMT (TT) Kit d'hélicoptères 3D Torque-Tube Align T-Rex Compat.

Generating Links

HK-500CMT (TT) Kit d'hélicoptères 3D Torque-Tube Align T-Rex Compat.

Prix:

Now save économisez 0,00 € 0,00 €

97,44 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
HK500CMT-TT
Livraison gratuite? Cliquez ici pour apprendre plus!

Le plus haut SPEC HK Heli, CMT est tout en métal, tout le carbone et allll bon!
Vous can''t de mettre à jour ce mauvais garçon, il est déjà mis à jour au maximum!
Beaucoup plus grand que c'est plus petit 450 frère, le 500CMT est un hélicoptère excitant de voir dans l'action et encore plus excitant de voler. Il 2,024 tête en alliage de «noyau dur assure les pilotes 3D ne serez pas déçus de la performance et le capot magnifiquement peint et titane anodisé composants font un hélicoptère visuellement superbe avec des performances pour le sauvegarder!
châssis principal en fibre de carbone, CF ailettes horizontales et verticales également empennage full metal rend cette parfaite héli pour Pro 's!
Toutes les pièces sont 100% compatibles avec T-Rex 500
Inclus sont principal et de queue des lames en fibre de carbone et supports de la rampe.
Cliquez ici pour les pièces et les mises à niveau.

Nous vous garantissons que vous ne trouverez pas un héli meilleur prix de cette qualité partout!

Caractéristiques.
Conception légère offre des performances de vol impressionnant et capacité 3D extrême.
tête / queue avec des paliers de butée Rotor.
CCPM liaison directe à nutation.
Centre de gravité du plateau de batterie conçue près de la tête de rotor.
Haute efficacité Torque-Tube entraîné la queue en métal.
queue système de rotation automatique entièrement entraînée.
montage boom servo de queue.
Carbon Fibre cadre principal et de soutien de la flèche des tiges.

Spécification.
Longueur: 840mm
Hauteur: 310mm
Diamètre du rotor principal: 970mm
diamètre du rotor de queue: 200mm
Moteur pignon: 13T
Principal engrenage d'entraînement: 162T
engrenage d'entraînement Tail: 31T
Conduisez rapport de transmission: 1: 12,46: 4,68
Poids (sans système d'alimentation): 1370g
Poids en vol: environ 1700g


Articles requis.
Brushless Outrunner Motor
Servos: Voir articles liés ci-dessous.
Radio vitesse: Gyro / Rx
ESC: 80A ou plus.
Batterie: 2 x 2200mAh 3S 20C ou plus.

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Baz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Not good

Oct 13, 2019

Poor quality and nothing even close to a trex 500 clone. No parts whatsoever are compatible. Quality of the parts is sad. Stripped nuts and bolts. No manual.or instructions and a complete waste of time and money. Parts missing. Useless. Dont bother

Gustavo Sganzerla | Acheteur vérifié

  • Overall
  • Quality
  • Value

Update to my previous review, tail authority improvement.

Jan 21, 2017

Update to my previous review: The lack of right rudder (nose-right tail rotor authority) that I was experiencing was not due to lack of tail rotor pitch but lack of tail servo torque. When spinning, the centrifugal force acting on the tail rotor blade grip pitch links forces the tail rotor to zero pitch. The higher the revs, the higher the tendency for the tail rotor blades to center at zero pitch. Above a certain head speed, the servo I was using simply ran out of torque to overcome this centering force, and that was causing the lack of nose-right tail rotor authority. I solved this problem by using an original Align tail rotor pitch control arm off of my Trex 600 ESP (it fits the 500 beautifully). This Align arm is longer on the side that connects to the servo pushrod, giving the tail servo higher mechanical advantage. So, either get a very strong tail servo or change the pitch control arm (google Align part number H60186A). Also, iinstalling the ball link on the innermost hole on the tail servo arm will help the servo deliver more torque to the pitch control arm. The servo I used for the tail is an HKS-9257 running on 5.5 volts. After tinkering with this heli a bit to solve a bunch of minor issues, I am now very happy with it. Thanks HobbyKing!

Gustavo Sganzerla | Acheteur vérifié

  • Overall
  • Quality
  • Value

Has a few kinks that have to be ironed out but, overall, good product.

Jan 09, 2017

I own an Align T-Rex 600 ESP and decided to build myself a HK 500 CMT TT with fairly cheap electronics, just to see how good or how bad of a heli this would get me. Turns out, I got quite a nice heli out of it. But this product does have some kinks that need to be ironed out by the builder: 1- The canopy needs to be reinforced where it connects to the bottom front of the frame (used toilet paper and CA glue for this, simple fix). 2- Gears on the front torque tube transmission were binding rather severely (after about 5 or 6 flights they wore themselves in and worked smoothly from then on). 3- Main blades and tail blades work, but they cause a fair amount of vibration (It flew fine on the original blades but Align main and tail blades improved the flying qualities and smoothness quite a bit). 4- Don't use very high head speeds or you will overstress the tail rotor, resulting in failure of the tail blade grip bolts and explosion of the tail rotor (there are several reports of this occurrence in other reviews; here CF Align blades help, as they are much lighter than the stock tail blades). 5- Torque tube must be rolled over a flat glass table and straightened-out by hand (also a simple fix). 6- Make sure to use every bit of tail pitch available, as you run out of right rudder on this heli fairly easily when using low rotor head speeds and pumping collective (not a problem when using normal head speeds, just don't go crazy high on the revs). Electronics used: Turnigy H3126 1600 KV motor and 13-tooth pinion, YEP-60A ESC, HK-752MG cyclic servos, HKS-9257 tail servo, Mini K-Bar flybarless controller, RJX flybarless head, Orange R-620x receiver. The original flybarred rotorhead is surprisingly smooth and well built, but I never did use it. Overall, I like this heli and think it is a great product if you are willing to do some tinkering to correct a few simple bugs and issues. And I love the clear windshield on the canopy. Gustavo Sganzerla, Brasilia, Brazil.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

Vous serez peut-être moins heureux de savoir que j'ai récemment acheté un hélicoptère pour lequel je n'ai aucune notice de montage, de réglage et de maintenance.

Donc ce modèle est toujours dans son carton, et s'il n'est pas possible d'avoir ces documents, il finira à la poubelle car je ne prendrais pas le risque de faire voler cet engin de manière hasardeuse et / ou périlleuse.

Bien entendu, je ne manquerais pas de faire une publicité négative auprès de mes collègues, et il ne sera plus jamais question de commander chez Hobby KIng.

A vous de choisir l'avenir.

Daniel

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 12, 2015

great helicopter, super stable, great price and other than the canopy it is a beautiful helicopter.

rainerwahnsinn | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2014

The Frames are different to the original T-Rex 500. The Battery tray is located higher than the original and the 3000mAh Turnigy Packs won't fit below the canopy.
Some Screws are different to the original Align, where Plastic screws were needed in this Heli are metric screws used.
There is no velcro, manual delivered and the Frames have very sharp edges.
I have only used the Maingear and the Tail to make my T-Rex looking like a Heli again. Flight test is still outstanding because the ESC is not back from manufacturer. (Not an HobbyKing-Issue). In summary I would say, that this Heli is not really 100pcnt compatible with Align.

michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 14, 2014

I have a Trex 500, but wanted to fly this kit first because of the price difference. Overall nice kit. However, I was missing the main blades from the box. After filing a claim(as a return, since there is no claim for missing parts) I was informed that I had to submit a photo or video of the issue before they would consider it. I asked what they wanted, a pix of the missing part? No response yet. I've placed 22 orders with HK, with no problems with any others. You'd think they would want to keep me as a satisfied customer over a $10 part.

Garry4 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 08, 2013

For the price very good deal. Torque tube and tail pitch slider had to replaced after 2 flights. Ordered my second one which will be converted to fbl.

Geert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2013

Snel geleverd via DE warehouse. Heli is erg compleet afgeleverd. Torque tube vervangen, was krom. Tevens linkage ball van swash vervangen, schroefdraad was te kort. Dit resulteerde in een crash toen de nick losschoot. Veel trilling in de heli, kwam door veel te ruimte op de metal main rotor housing. Deze ook vervangen door origineel. Tevens hoofdas vervangen door origineel. Maindrivegear vervangen, van hk was krom. Originele maindrivegear was recht en 6 gram zwaarder. De linkage ball van alle servo hevels vervangen, de originele zijn niet met een moertje geborgd en zitten er naar mijn idee niet echt goed vast. Conclusie: Veel heli voor weinig, bouwen was prettig, over sommige onderdelen is niet goed nagedacht. Toch tevreden.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 23, 2013

Just resived may heli and hes in perfect condition

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Fichiers clients
hk 500 Download [1907]
hk 500 Download [1972]
HK500TT in action Download [96]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires