New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HKPilot Mega 2.7 Contrôleur de vol USB / GYRO / ACC / MAG / BARO

HKPilot Mega 2.7 Contrôleur de vol USB / GYRO / ACC / MAG / BARO

Discontinued Product

Please continue searching for a similar product.
SKU:
387000051-0
WANT FREE SHIPPING? Click here to find out more!

Le tout nouveau HK PilotMega 2.7 est un regard neuf et une refonte du contrôleur de vol populaire basée APM. Au cours du projet et le développement de l'Open Source 2.5 plate-forme ArduPilot, certains problèmes connus et les défis ergonomiques ont été notés. Le but du HK PilotMega 2.7 était de fixer et d'améliorer cette grande plate-forme, de redonner à la communauté une conception qui est améliorée et stable, et pourtant un prix raisonnable, ce qui rend ce contrôleur de vol super puissant une grande option fiscale pour les variantes de 32bit. Il y a 5 amélioration majeure dans le 2.7, et ont tous besoin des fichiers de construction sont disponibles sous l'onglet fichiers pour la communauté à utiliser.

HK PilotMega 2.7 Améliorations:

1) Bouchon de 100uF en Vcc et le condensateur 10uF tantale ajouté pour arrêter 3.3v mauvais problèmes de santé gyroscopiques

2) Le remplacement du (non utilisé / redondante) 1,0mm 6p port GPS avec df13-4P I2C port compas externe, en mettant les ports GPS et une boussole extérieur à côté de l'autre, ce qui rend plus facile pour les connexions.

3) Port multifonction MUX ajouté dans l'ancien emplacement du port I2C, cela permet aux utilisateurs de sélectionner une sortie du plot de liaison (UART0, UART2, I2C, OSD " par défaut est OSD". Cette nouvelle disposition permet une transmission de données plus stable avec une résistance d'isolement.

4) problème de trace 3,3V et 5V Dataflash / Flashrom permuté corrigée à l'AT45DB161.

5) Compass externe activer / désactiver le cavalier ajouté, versets avoir à couper un fil de trace.

Le Mega HKPilot 2.7 est basé sur le méga ArduPilot évolution rapide et raffinée ou «APM», un projet open source de la robotique 3DR. Ce contrôleur de vol étonnant permet à l'utilisateur de transformer toute voilure fixe, à voilure tournante, ou d'un véhicule multi-rotor (même des bateaux et voitures) dans un véhicule totalement autonome, capable d'effectuer un large éventail de tâches, même programmées missions GPS avec des waypoints (avec le module optionnel GPS).

Diverses interfaces utilisateur sont disponibles pour la programmation, l'examen des journaux, et même des applications pour les téléphones intelligents et les tablettes. La radio de télémétrie en option permet une communication radio bidirectionnelle vous donnant un contrôle complet et fournit des données en temps réel à votre ordinateur ou tablette. La liste de ce que ce contrôleur de vol est capable de a rapidement été dépassé par ce qu'il ne peut pas, avec des caractéristiques, modes de vol et les plates-formes prises en charge. Le projet d'APM est soutenu par des milliers d'utilisateurs poussant ce contrôleur de vol open source pour être l'un des meilleurs systèmes disponibles.

Caractéristiques:
• question de 3.3v de «mauvaise santé Gyro" résolus dans le 2.7
• Connecteurs relocalisés pour une meilleure mise en page de fil
• Port Mux ajouté pour l'OSD ou d'autres sorties sélectionnables
• DataFlash échangé lignes de tension fixés dans le 2.7
• Boussole externe Jumper ajouté
• Compatible Arduino
• Pré-soudé et testé
• 3 axes gyro, accéléromètre, magnétomètre et haute performance baromètre
• Construit en 4 puce MP Dataflash pour l'enregistrement automatique des données
• Boussole Honeywell HMC5883L-TR numérique
• 6 DoF Accéléromètre / Gyro MPU-6000 de Invensense
• Capteur de pression Measurement Specialties MS5611-01BA03 barométrique.
• Atmel ATmega2560 et ATMEGA32U-2 (traitement et la fonction USB).
• Micro USB
• Prise en charge de la boussole externe
• Entrée GPS, I2C, entrée du module d'alimentation
• ports de capteurs radio télémesure, OSD et de vitesse

Spécifications:
Dimensions: 44x70x15mm (avec étui)
Poids: 32g (avec étui)

Comprend:
HKPilot Mega 2.7
Connexion conduit x 5
ruban adhésif double face Case et 3M

* Note: La référence à l' APM se réfère au ArduPilot projet, une famille de autopilotes open source basé sur l'open source Arduino plate - forme informatique, développée par 3DR et la communauté open source. Il se compose d'un choix de ArduPilot Mega (APM) électronique et une gamme de versions de logiciels libres pour différents véhicules et est régie par un open source licence creative commons. Ce produit est basé sur le projet d'APM open source de robotique 3D, les fichiers CAD par la licence Creative Commons est disponible sous l'onglet fichiers.

* Note: Ce ne sont pas un produit original de marque Arduino.

  • UGS 387000051-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 85.0000
  • Longueur 110.00
  • Largeur 45.00
  • la taille 80.00
  • HK PilotMega 2.7
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

Awesome flight controller! You can do anything with this!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome flight controller! You can do anything with this!

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

  1. 1
  2. 2
  3. 3
Customer files
Link to optical flow guide Download [10]
Optical Flow Pinout Download [126]
Powet Rails Download [253]
No File Name Download [20]
No File Name Download [99]
high res PDF of board schematic Download [49]
11x17 PDF of 2.7 schematic Download [47]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save