New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HKPilot Mega LED Driver Board 12V (4ch) (APM)

HKPilot Mega LED Driver Board 12V (4ch) (APM)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

4,19 €
Statut:
En stock.
SKU:
387000046-0
WANT FREE SHIPPING? Click here to find out more!

Ce facile à utiliser conduit carte de conducteur est conçu et mis en place pour l'exécution des indicateurs LED externes de votre Mega HKPilot ou APM. Vous pouvez facilement contrôler de 12V conduit jusqu'à 700ma des A4 ~ 7 broches sur votre contrôleur de vol compatible APM. 12V haute visibilité externe Indicateurs LED pour bras moteur, état Arm, GPS et basse tension peuvent désormais être facilement contrôlée avec ce must have accessoire de contrôleur de vol.

Spécifications:
Tension d'entrée: jusqu'à 12V
Sortie: 700ma
Poids: 5.3g
Chaînes de LED: 4

* Note: La référence à l' APM se réfère au projet ArduPilot, une famille de autopilotes open source basé sur l'open source Arduino plate - forme informatique, développée par 3DR et la communauté open source. Il se compose d'un choix de ArduPilot Mega (APM) électronique et une gamme de versions de logiciels libres pour différents véhicules et est régie par un open source licence creative commons.

* Note: Ce ne sont pas un produit original de marque Arduino.

  • UGS 387000046-0
  • Brand H-King
  • Capacité ( mAh ) -
  • Poids 18.0000
  • Longueur 30.00
  • Largeur 10.00
  • la taille 30.00
  • HK Pilot Mega Accessories
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Easy to setup and does exactly what it is suppose to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to setup and does exactly what it is suppose to.

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

Customer files
Ignore my horrible soldering! ;) Download [1238]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save