New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HKPilot Transceiver Télémétrie Radio Set V2 (433Mhz)

HKPilot Transceiver Télémétrie Radio Set V2 (433Mhz)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

30,27 €
Statut:
En stock.
SKU:
387000048-0
WANT FREE SHIPPING? Click here to find out more!

Ce nouvel ensemble de radio V2 Télémétrie vous permet de relier à un contrôleur de vol, comme notre Mega HKPilot ou MultiWii AIO à un périphérique USB ou UART équipé comme un ordinateur, un ordinateur portable ou une tablette supportant une connexion USB (OTG). Les nouvelles radios V2, ne sont plus un module Air / Sol séparé, que les deux émetteurs-récepteurs peuvent utiliser UART ou les connexions USB et prend en charge les deux modes. La radio définie non seulement vous permet de voir les données en direct telles que la position en direct GPS superposée sur une carte mais le système de tension, cap, navigation waypoint même horizon artificiel et bien plus encore. Utilisation de l'open source MAVlink logiciel de station au sol sur la base, vous pouvez même piloter votre avion avec un joystick via votre ordinateur et mettre à jour les paramètres en direct! Ou tout simplement l'utiliser pour vos projets de bricolage qui a besoin d'une interface série sans fil. Ce kit offre un prix bas, une plus longue portée et des performances supérieures. Le système utilise la bande 433Mhz et fournit un lien full-duplex en utilisant les modules HM-TRP de HopeRF en cours d'exécution personnalisées, open source, firmware.

Caractéristiques:
• modules aériens et terrestres interchangeables
• Port Micro-USB
• connecteur DF13 position 6
• 100 mW de puissance de sortie maximale (réglable)
• -117dBm sensibilité de réception
• Basé sur le module HM-TRP de HopeRF
• connecteur RP-SMA
• communication 2 voies full-duplex par TDM adaptative
• Interface UART
• liaison série Transparent
• MAVLink protocole cadrage
• Frequency Hopping Spread Spectrum (FHSS)
• cyclique Configurable
• La correction d'erreur corrige jusqu'à 25% d'erreurs de bit
Open-source SIK firmware
• Configurable par Planner * Mission et * APM Planner

Spécifications:
Tension d'alimentation: 3.7-6 VDC (de connecteur USB ou de DF13)
Transmettre: 100 mA à 20 dBm
Recevoir courant: 25 mA
Interface série: 3,3 V UART
Taille: 25.5x 53x11 ​​mm (sans antenne)
Poids: 11.5g (sans antenne)

Compris:
Deux modules radio avec des antennes 433Mhz
câble Micro-USB
câble adaptateur OTG Android
câble connecteur Pixhawk 6 fils
-6 à 5 positions de câble connecteur APM et PX4

les règlements de fréquence varient selon les pays, consultez votre autorité de l'espace aérien local pour savoir quelle fréquence est légal dans votre région.

* Note: La référence à l' APM se réfère au projet ArduPilot, une famille de autopilotes open source basé sur l'open source Arduino plate - forme informatique, développée par 3DR et la communauté open source. Il se compose d'un choix de ArduPilot Mega (APM) électronique et une gamme de versions de logiciels libres pour différents véhicules et est régie par un open source licence creative commons.

* Note: Ce ne sont pas un produit original de marque Arduino.

  • UGS 387000048-0
  • Brand HKPilot
  • Capacité ( mAh ) -
  • Poids 123.0000
  • Longueur 110.00
  • Largeur 45.00
  • la taille 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ce produit est d'excellente qualite et fonctionne tres bien sur un pixhawk ou un APM 2.7
Tres satisfait
Merci Hobby King

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ce produit est d'excellente qualite et fonctionne tres bien sur un pixhawk ou un APM 2.7
Tres satisfait
Merci Hobby King

I found out that the promised output power of 100mW is not true.
I bought two sets (4 radios) and 3 of them have only 50pcnt (50mW) max. output and one 80pcnt.
I set the output power to max and measured.
So it seems you have to be lucky to get one of the better ones with at least acceptable 80pcnt output power.
I'm disappointed and this is not what I payed for.
After sending them back I got replacements, but it was the same, around 50pcnt output power so only half the range its suppose to have.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I found out that the promised output power of 100mW is not true.
I bought two sets (4 radios) and 3 of them have only 50pcnt (50mW) max. output and one 80pcnt.
I set the output power to max and measured.
So it seems you have to be lucky to get one of the better ones with at least acceptable 80pcnt output power.
I'm disappointed and this is not what I payed for.
After sending them back I got replacements, but it was the same, around 50pcnt output power so only half the range its suppose to have.

Work good, easy to wire up, good quality with long range.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Work good, easy to wire up, good quality with long range.

Used auto detect setting in Mission Planner and works fine. Good quality product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used auto detect setting in Mission Planner and works fine. Good quality product.

WARNING !!!

Its not working, seems its may work on some installations, and other it does not. As long as HK is not providing any instructions stay away from it as it may be a waste of Money. The Modules do connect to each other, but they do not transmit any data.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING !!!

Its not working, seems its may work on some installations, and other it does not. As long as HK is not providing any instructions stay away from it as it may be a waste of Money. The Modules do connect to each other, but they do not transmit any data.

Very nice product. Steal deal for the price. Comes with casings, antennae and all cables and even a double sided mounting tape! However there may be issues installing these and running them with Mission Planner (v. 1.3.7 is what I use).

My initial connection failed and I had to install FTDI drivers (http://www.ftdichip.com/Support/Documents/InstallGuides.htm) for WIN7 (Have also uploaded them). It then showed up on COM14 port and connected flawlessly. I now get live feed from my air module to ground. However, when I try to load settings or upload firmware, Mission Planner says "Failed to identify radio" or just "Failed". This is a big drawback as I cannot edit settings for the radio. However, do not worry, you can still fly with the radio! Would be good if HK uploaded help files for these radios, especially for newbies like me.

Will try to resolve it, and will post more on range checks later.

Good work HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice product. Steal deal for the price. Comes with casings, antennae and all cables and even a double sided mounting tape! However there may be issues installing these and running them with Mission Planner (v. 1.3.7 is what I use).

My initial connection failed and I had to install FTDI drivers (http://www.ftdichip.com/Support/Documents/InstallGuides.htm) for WIN7 (Have also uploaded them). It then showed up on COM14 port and connected flawlessly. I now get live feed from my air module to ground. However, when I try to load settings or upload firmware, Mission Planner says "Failed to identify radio" or just "Failed". This is a big drawback as I cannot edit settings for the radio. However, do not worry, you can still fly with the radio! Would be good if HK uploaded help files for these radios, especially for newbies like me.

Will try to resolve it, and will post more on range checks later.

Good work HK!

Hat sich problemlos installieren lassen. Die Reichweite liegt bei ber 1km. Ich bin begeistert.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hat sich problemlos installieren lassen. Die Reichweite liegt bei ber 1km. Ich bin begeistert.

Nice boxed telemetry set for all your APM or HK Pilot needs :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice boxed telemetry set for all your APM or HK Pilot needs :)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save