Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing 1612 Brushless Outrunner 3200KV

Generating Links

HobbyKing 1612 Brushless Outrunner 3200KV

Prix:

Now save économisez 0,00 € 0,00 €

14,76 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
HK1612-3200
Livraison gratuite? Cliquez ici pour apprendre plus!

Specs.
RPM / V: 3200Kv
Cell Count: 2s Lipoly
Max.efficiency: 81,1%
Courant à Max.eff: 2 ~ 4.7A
COURANT MAXI: 6A
Non Courant de charge: 0,3A / 7V
Inteme Résistance: 350mOhm
Dimensionsï¼Dia.xLï¼ ‰: Φ16mm × 12mm
Shaft: 1.5mm
Poids: 8.8g

  • Kv ( rpm / v) 3200.00
  • Max Current (A) 6.00
  • Résistance ( mh ) 350.00
  • Max Tension (V) 7.00
  • (W ) 44.00
  • Arbre A ( mm ) 1.50
  • Longueur B ( mm ) 10.00
  • Can Diamètre C ( mm ) 17.00
  • Longueur Can D ( mm ) 7.00
  • Longueur totale E ( mm ) 20.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Blendedwing | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 15, 2014

Well, I am a Little concerned about the weight. The specifications state 8.8 g.
I have just received the three Units I have ordered and my scale tells a different story: 11.6g ; 11.6g and 11.7 g. That is 32pcnt above specifications. I would recommend to update the specifications !!!
The Motors have not been tested yet, but for indoor weight is paramount.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 10, 2014

like anything advised to take

he has not tried )

SERGEY VASILEVICH | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 08, 2013

Got this engine. It is much better quality than previous modification. Little heavier, but more solid. Thicker wires, bigger mounting holes.
Old 1612 live about 30 min (installed on Bonsai 600mm).
Photo old and new motor in files section

HOTTI | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 03, 2013

Super Motor hab ich in meinem Bonsai drin

kleinbottled | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 07, 2012

Couldn't be happier with this tiny motor. Good match to my mini-pop wing/bonsai with 2s 950 and 5x3 prop. With light acrobatic flying, flight timer is set to 15:30, and the batteries come back ~60pcnt discharged. Efficient fun!

fern420 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2012

While the motor itself is fine, the mounts are just too weak for the thrust it produces, I have now broken 3 motor mounts using this motor on a micro quad simply from usage, no crashes, the mounts are just way too weak, they will twist and flex until they weaken and then finally break, there's just no way around it, if your going to use them allot the mounts will break long before the motor itself ever goes bad.

Jeff | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 16, 2012

Motor arrived well packaged (As always by HK!!)

I was quite surprised by the size of it, this thing is TINY! I am putting it on a mini popwing and it seems to have good thrust and an exact replacement for the T-motor they say to use with the mini popwing

I think I will connect this either directly to an ESC or use some .8mm bullet plugs (IF they ever come back in stock lol) to save on weight.

carstenwu | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 16, 2011

Just put it on today. Did a small test of 'Pull power' Got it to pull 144g, with a 5/3 prop far from the 170 they say. ! Did not get hot at all. :)Looks like a good build. More to come when I have been out flying.

tinycp | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 30, 2011

Tres bon moteur mais n'as pas fais l'effet escompter sur mon F3P de 115g ( avec accu)par contre trs bien sur un minimag pour l'ecolage.

Famelazar | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 06, 2011

Nice little BL! Gives the Bonsai-Wing enough power for light aerobatics w/ a 2S 700mAh LiPo and 6x3 Prop. Flight times are about 20min w/ moderate aerobatics. Climbing at 45 degrees are no issue with this one. A bit of con: The wires like to brake easy. be aware to bend them often.

  1. 1
  2. 2
Fichiers clients
HK1612-3200 Download [1259]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!