New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Cadre HobbyKing 650X6 pliant Hexacopter avec Crab Grand Train d'atterrissage (KIT)

Cadre HobbyKing 650X6 pliant Hexacopter avec Crab Grand Train d'atterrissage (KIT)

Discontinued Product

Please continue searching for a similar product.
Poids
859 g
SKU:
387000044-0
WANT FREE SHIPPING? Click here to find out more!

Présentation de l'HobbyKing 650X6 Hexacopter, une alternative fantastique pour le pliage 600 classe Hexacopter prix élevé.

Le HK 650X6 est livré avec notre équipement populaire Crab multi-fonctions, fournissant plus de 200mm de garde au sol. L'engrenage multifonction attache au HK 650X6 avec le crochet de 60mm et de tige supports normalisés en utilisant isolateurs œillet, fournissant 2 plaques de montage de vibration libre "propre" avant et arrière pour vos accessoires. Le Hexacopter peut plier son parallèle d'armes, permettant le transport et l'entreposage. Les moteurs sont pris en charge par deux supports composites et le cadre central a contrôleur de vol et GPS la tour des plaques de montage.

Le HobbyKing 650X6 Hexacopter est un excellent choix pour les travaux de photographie aérienne ou l'endurance de vol. La meilleure caractéristique est le prix HobbyKing.

Caractéristiques:
• bras repliables pour le transport et le rangement
• train d'atterrissage de crabe Grand
• isolés doubles plaques de montage propres
• contrôleur de vol et GPS tour de montage
• Poids léger
• supports à double moteur

Spécifications:
Poids: 612g (cadre sans électronique)
Largeur: 650mm (centre de l' arbre moteur au centre de l' arbre moteur)
Trous Motor Bolt: 15 ~ 25 mm de largeur

Obligatoire:
Moteur: 2212 ~ 4822 classe x 6
Batterie: 2200 ~ 6500mAh
contrôleur de vol
5ch système de contrôle de la radio
ESC 20 ~ 30A x 6

* Note: Ceci est un kit de constructeurs et ne comprend pas électronique ou moteurs

  • UGS 387000044-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 859.00
  • Longueur 350.00
  • Largeur 60.00
  • la taille 200.00
  • Foldable Hexacopter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It is carbon fiber, aluminum booms and pretty strong for a very cheap frame. Number 1 con: it is a very small area to mount FPV gear, etc. I made a very large plastic plate from a 5.5 gallon bucket, dyed it black using RIT dye (get at grocery stores, wal-mart, etc. for dyeing clothes) and it works great. Made it almost the same size as the bottom 2 CF plates. If you are planning to mount FPV gear it will not fit without you modifying it.

Number 2 con: the frame is cheap so it is not going to withstand a hard crash without breaking the carbon fiber plates. But for this low price it is a good deal. Just make sure you can fly without crashing it and you will be all right.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is carbon fiber, aluminum booms and pretty strong for a very cheap frame. Number 1 con: it is a very small area to mount FPV gear, etc. I made a very large plastic plate from a 5.5 gallon bucket, dyed it black using RIT dye (get at grocery stores, wal-mart, etc. for dyeing clothes) and it works great. Made it almost the same size as the bottom 2 CF plates. If you are planning to mount FPV gear it will not fit without you modifying it.

Number 2 con: the frame is cheap so it is not going to withstand a hard crash without breaking the carbon fiber plates. But for this low price it is a good deal. Just make sure you can fly without crashing it and you will be all right.

I recived it in one week from china. plates are carbon fiber got all screws and spacers and I also get an extra spacers for distribution board which I like a lot. Only thing is that it doesn`t have much space for all electronics in the middle. Now I have to figure it out where will FPV modul fit. Overall this kit is very good for beginners like me

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recived it in one week from china. plates are carbon fiber got all screws and spacers and I also get an extra spacers for distribution board which I like a lot. Only thing is that it doesn`t have much space for all electronics in the middle. Now I have to figure it out where will FPV modul fit. Overall this kit is very good for beginners like me

Its a Great Fream but this Gold stuff is not included you will only get that in Black

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a Great Fream but this Gold stuff is not included you will only get that in Black

this hex is a first great build kit,goes together easy,everything fits nice,or for the exp flier too,i used 6 multistar elite 1220 920 kv motors,6 afro 30 amp esc 1 with bec 5 opto, and a 5000,30 c 3 cell battery hard case style , 6 carbonfibre 9x4.5 props, and the price is awesome 35.00,its a high quality kit light and strong too and love the wide tall landing gear,it is so simple to build all u need is allen wrench,and socket to fit nuts,i got 20 minutes on 2nd flight with a 5000 battery,my total cost was 226.00 minus the radio,im ordering another one at these prices,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this hex is a first great build kit,goes together easy,everything fits nice,or for the exp flier too,i used 6 multistar elite 1220 920 kv motors,6 afro 30 amp esc 1 with bec 5 opto, and a 5000,30 c 3 cell battery hard case style , 6 carbonfibre 9x4.5 props, and the price is awesome 35.00,its a high quality kit light and strong too and love the wide tall landing gear,it is so simple to build all u need is allen wrench,and socket to fit nuts,i got 20 minutes on 2nd flight with a 5000 battery,my total cost was 226.00 minus the radio,im ordering another one at these prices,

ladies,LADIES,pleaseeee. this is an awesome hex,u wonder about a motor that don't match up get the multistar elite 2212 920 kv ones,and the afro 30 amp speed controller, recommended 4 the multirotor , and the hardcase control board with the offboard programmer,this is my first build I wanted a hex that I can use aspec or turnigy fast charge battery I get tired of waiting over1.5 hours for my phanton2 to charge battery.oh im gettint rid of the phantom 2 and the 2 battery I love hk stuff its awesome,and afforadable too

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ladies,LADIES,pleaseeee. this is an awesome hex,u wonder about a motor that don't match up get the multistar elite 2212 920 kv ones,and the afro 30 amp speed controller, recommended 4 the multirotor , and the hardcase control board with the offboard programmer,this is my first build I wanted a hex that I can use aspec or turnigy fast charge battery I get tired of waiting over1.5 hours for my phanton2 to charge battery.oh im gettint rid of the phantom 2 and the 2 battery I love hk stuff its awesome,and afforadable too

Ottimo telaio in alluminio e fibra di vetro! Il carrello resiste a cadute di quasi 2 metri

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ottimo telaio in alluminio e fibra di vetro! Il carrello resiste a cadute di quasi 2 metri

Just received my hexa and it was a quick mount. It is very nice and it seems strong.The landing crab does not look so strong, which is made of plastic.But overall it is a nice frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received my hexa and it was a quick mount. It is very nice and it seems strong.The landing crab does not look so strong, which is made of plastic.But overall it is a nice frame.

Great value 650 size hexacopter frame. Better than I expected and I would definitely buy another one. There's a few comments around that folding it requires loosening off bolts and that it's too much trouble. That's not true though. If you use the washers on the outside bolts on the folding arms and don't over tighten them, you can hold the middle arms and give it a firm shove to fold. It will still be plenty firm enough to not move in flight. That might not be as an elegant solution as some folding frames, but hey, look at the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great value 650 size hexacopter frame. Better than I expected and I would definitely buy another one. There's a few comments around that folding it requires loosening off bolts and that it's too much trouble. That's not true though. If you use the washers on the outside bolts on the folding arms and don't over tighten them, you can hold the middle arms and give it a firm shove to fold. It will still be plenty firm enough to not move in flight. That might not be as an elegant solution as some folding frames, but hey, look at the price.

flight https://www.youtube.com/watch?v=X4fafKAED1I
blah blah blah blah (I dunno how long review should be to be published)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

flight https://www.youtube.com/watch?v=X4fafKAED1I
blah blah blah blah (I dunno how long review should be to be published)

not a bad kit, but you do get what you pay for! who ever is in charge of QC should be allotted a full bowl of rice to improve performance. I had a total of 13 screws that were not to any standard 2 didn't even have a socket head. and the instruction manual what a joke!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not a bad kit, but you do get what you pay for! who ever is in charge of QC should be allotted a full bowl of rice to improve performance. I had a total of 13 screws that were not to any standard 2 didn't even have a socket head. and the instruction manual what a joke!

  1. 1
  2. 2
Customer files
HobbyKing 650 12" Maximum Props! Download [289]
hexa650 Download [1939]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save