-
Description
du -
micro moteurs de haute qualité. Précision plaie avec du fil d'argent-cuivre et lamelles ultra-dur presse.
Des performances extrêmes et de l'efficacité pour votre micro avion.
Usine Spec.
Kv: 7000rpm / v
Lipo Range: 1S 3.7V
prop suggérée: 2508-3020
Courant max: 2A
Burst actuelle (10sec): 2.5A
Poids: 2.3g (y compris montage et le fil)
Shaft: 1.5mmLongueur de l'arbre: 4mm
Dimensions: 13 x 8mmDonnées de test:2508 prop (recommandé)Voltage: 3.7VCourant: 0.9AThrust: 19g3020 propVoltage: 3.7VCourant: 1.8AThrust: 27g -
Product
Specifications -
Informations supplémentaires
-
Référence:
HK-AP02-7000
-
Brand:
HobbyKing
-
Poids (g)
12.00
-
Longueur
82.00
-
Largeur:
11.00
-
Taille:
35.00
-
Kv ( rpm / v)
7000.00
-
Max Currents (A)
2.50
-
(W ):
0.00
-
Longueur B ( mm ):
8.00
-
Longueur Can D ( mm )
2.00
-
Max Tension (V)
4.00
-
Arbre A ( mm ):
2.00
-
Unit Weight (g):
2.3
-
Diamètre C ( mm )
13.00
-
Longueur totale E ( mm )
13.00
-
Résistance ( mh ):
0.00
-
Référence:
-
Community
Discussions -
-
Rate&
Review -
I have this motor since 2 years and finally could test it.
GWS2510, small plane AUW 18g with battery Turnigy 160mAh, current 0.99A, 18750rpm, 18-20g estimated thrust.
ESC is the one integrated into supermicro 2.4GHz 5ch brick.
Really smooth, silent, no vibrations (I balanced the GWS2510 first). The servos on the brick are really noisier.Use it as micro heli tail motor. Different kind of mountings (screws beside axis) would be good.
Good motor, not that cheap, but very good.I use this motor in a small depron-glider. 1g ESC, 2xToki servos, 5ch pene reciever, 1S 138mAh Lipo and GWS 3x2 porpeller. Flightwight 37.5g (wingspann84cm). Its a little bit noisy but it's ok. The power of the motor is super!Amazing motor for 1S lipos. I got 36g thrust with a GWS3030.A nice motor. I had bought the 2g hexTronic motor before, but never got that really run nicely. Might have been a problem with the ESC, but then again, read in the net about bearing problems of that one, too. This AP-02, OTOH, works smoothly with the HK mini-ESC. The 1.5mm shaft could be fitted with a prop adapter, but the 3020 prop can also be slightly reamed to snugly fit the shaft. Just need to build a model for the power train... :-)Excellent upgrade for 4G3 micro heli- tail motor. More power than original brushless motor, fits motor holder with only 1 small adjustment (cutting away 1 bar for motor axle).
its so cute! tiny, wow!! very coolgreat micro motor! Ap motors are know for quality and now HK has them ar a great price! -
Upload
Videos -
Upload
Files -
Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!