New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Centre HobbyKing de machine Gravity Airplanes

Centre HobbyKing de machine Gravity Airplanes

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

11,37 €
Statut:
Backorder
SKU:
9171000232
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

Configuration du CG correct (centre de gravité) pour votre modèle est crucial en ce qui concerne les performances de vol. Tenter de voler un modèle qui ne sont pas correctement équilibrée peut entraîner une perte totale. Avec le tout nouveau Centre de HobbyKing machine Gravity, tout conjecture est prise hors de l'équation.

Facile à assembler et fabriqués à partir de matériaux de haute qualité, cette machine va durer toute une vie. Il dispose d'souverains coulissantes qui vous donnera une mesure très précise CG du bord d'attaque de l'aile.

Caractéristiques:
• Facile à assembler
• Fabriqué à partir de matériaux de haute qualité
• Peut mesurer CG jusqu'à 250mm à partir du bord de l'aile
• Jeu de 380mm entre les points de mesure et la surface
• largeur de 260mm maximum entre les points de mesure (réglable)

  • UGS 9171000232
  • Brand HobbyKing
  • Capacité ( mAh ) -
  • Poids 960.0000
  • Longueur 400.00
  • Packaging Width 40.00
  • la taille 225.00
  • HK Centre Of Gravity Machine
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Was struggling with the CG on my HobbyKing B17, got CG balancer,sorted it first time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was struggling with the CG on my HobbyKing B17, got CG balancer,sorted it first time.

ein muss für jeden RC Pilot. Einfache Handhabung.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ein muss für jeden RC Pilot. Einfache Handhabung.

Don't waste your money if you have lighter planes. My planes are typically EPP or depron and less than 300 g AUW. You can't use this balancer as the 90 set squares etc that hold the wing are quite heavy and significantly throw out the COG. To balance you have to remove them and then you may as well balance on your fingers/pencils.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't waste your money if you have lighter planes. My planes are typically EPP or depron and less than 300 g AUW. You can't use this balancer as the 90 set squares etc that hold the wing are quite heavy and significantly throw out the COG. To balance you have to remove them and then you may as well balance on your fingers/pencils.

Good balacer, poor manufacturing. Its weak in the balance points. You need to be very carefull to assemble this one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good balacer, poor manufacturing. Its weak in the balance points. You need to be very carefull to assemble this one.

Must have for all benches

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Must have for all benches

i had concerns if this will fit my bigger airplanes. But no problem at all. I had Sailplanes with 2.5m on it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i had concerns if this will fit my bigger airplanes. But no problem at all. I had Sailplanes with 2.5m on it

Overall this is not a good quality machine. The weight of the rulers DOES affect the way the plane will balance. Unless your plane requires the exact same balance point as the rulers, you will get a false setup... Then there is the issues with the quality of the parts...

The machined alloy bits are beautiful.

The chrome steel rods are flawless.

The plastic square rulers are excellent.

The frames are not so nice. They're made of hand finished MDF that has been coated to prevent moisure damage. The bottoms that sit on the bench aren't totally flat. Then when you insert the two rods that hold them together and sit it on a flat surface (that has been proven to be flat and level), the machine rocks on two corners. To top all that off, when you insert the two pins at the top that are the actual balance point, the MDF splits down the middle.

Also if you happen to have a high-wing plane with struts underneath the wings, you may not get it to sit on the machine at all unless you remove the stuts.

Overall this is not worth buying. You will spend more money making it right than you did on buying it. It will also take you a couple of hours. You may as well just make your own from scratch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall this is not a good quality machine. The weight of the rulers DOES affect the way the plane will balance. Unless your plane requires the exact same balance point as the rulers, you will get a false setup... Then there is the issues with the quality of the parts...

The machined alloy bits are beautiful.

The chrome steel rods are flawless.

The plastic square rulers are excellent.

The frames are not so nice. They're made of hand finished MDF that has been coated to prevent moisure damage. The bottoms that sit on the bench aren't totally flat. Then when you insert the two rods that hold them together and sit it on a flat surface (that has been proven to be flat and level), the machine rocks on two corners. To top all that off, when you insert the two pins at the top that are the actual balance point, the MDF splits down the middle.

Also if you happen to have a high-wing plane with struts underneath the wings, you may not get it to sit on the machine at all unless you remove the stuts.

Overall this is not worth buying. You will spend more money making it right than you did on buying it. It will also take you a couple of hours. You may as well just make your own from scratch.

for the price, its a nice working center of gravity stand. needs a water pass to get the level right... 5/5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

for the price, its a nice working center of gravity stand. needs a water pass to get the level right... 5/5

very easy to build, but you have to slightly ream out all the holes in the wooden sections, very useful item, i am glad i bought it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very easy to build, but you have to slightly ream out all the holes in the wooden sections, very useful item, i am glad i bought it

Fine CG machine, excellent value for money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fine CG machine, excellent value for money!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
Manual - Hobbyking CG Machine Download [1764]
No File Name Download [249]
No File Name Download [367]
No File Name Download [249]
No File Name Download [249]
No File Name Download [367]
wood split Download [53]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!