Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing FPV250 V4 Bleu Esprit Édition LED Night Flyer FPV Quad Copter (Bleu) (Kit)

Generating Links

HobbyKing FPV250 V4 Bleu Esprit Édition LED Night Flyer FPV Quad Copter (Bleu) (Kit)

Prix:

Now save économisez 0,00 € 0,00 €

19,24 €
Quantité:
Expédié de:
  • USA
Statut:
En stock
SKU:
366000033-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Présentation de l'HobbyKing FPV250 Esprit V4 édition Quadrirotor, un mini-copter quad taille avec grand FPV et vol de nuit capacité fun.

Le FPV250 est un mini taille FPV Quadrirotor la mesure à un simple 250mm. Ce durable, peu coûteuse plateforme FPV multi-rotor est parfait pour les courses de FPV ou parcours d'obstacles volant et à votre domaine local, et maintenant avec la pleine longueur de bras LEDs de parement supérieur qui illuminent le cadre et les accessoires pour l'orientation translucide et l'ultra-lumineux vers le bas face LED blanches faisant toute la lueur de trame dans le ciel nocturne et encore plus visible dans la journée. La carte de distribution de puissance centre Inclus a également construit dans le système 5V UBEC pour l'utilisation de composants aux.

Le cadre d'une seule pièce est extrêmement durable, vous donnant la confiance pour aller FPV barnstorming et pourtant ne pèse que 110 grammes. La plate-forme avant est conçu pour gérer jusqu'à une casserole 2 servo et inclinez configuration de la caméra et la plateforme arrière prend en charge l'émetteur vidéo, de tout garder agréable et équilibré. Le FPV250 dispose d'un centre baie assez grand pour les contrôleurs de vol les plus populaires et comprend une cage de collision supérieure pour la protection. Il y a quatre fentes de sangle intégrée sur le fond pour maintenir solidement la batterie en place pour une grande G manoeuvre. Les FPV250 supports de moteur peut gérer quoi que ce soit à partir d'un moteur de 1506 à 2208 et les bras ventilés fournir beaucoup de refroidissement pour votre 7 ~ 12A CES.

Le HobbyKing FPV250 est un budget FPV esprit basher, prêt à obstacles casse-cou ou Spec ClassFPV course et maintenant le vol de nuit amusant. Il est temps de commencer à pratiquer vos compétences FPV, la saison de course se prépare à commencer!

Caractéristiques:
Ultra cadre de la longueur du bras plein lumineux monté LED
Tout cadre clair qui saisit les lumières LED et rougeoie
inclus hélice clair qui éclairent avec les LEDs de parement supérieur
• Construit en 5V UBEC et PDB
• Une construction de pièce pour la durabilité
• baie de contrôleur de vol protégée Grande 55x55mm cage
• Montage Support pour une casserole 2 servo et la caméra d'inclinaison et de l'émetteur vidéo
• Une large gamme de moteurs et de puissance d'options
• train d'atterrissage amovible
• Inclus Effacer set 5030 prop

Spécifications:
Empattement: 250mm
Poids: 110g
Hauteur: 106mm avec train d'atterrissage et le centre cage

Obligatoire:
4 x Motors 1506 ~ 2208
1 x Batterie 800 ~ 1300mah 7.4 ~ 11.1V (2 ou 3 cellules LiPoly)
4 x ESC de 7 ~ 12A
contrôleur de vol multi-rotor 1 x
la radio 4ch (6ch recommandé pour FPV et le FC utilisation)
engrenage FPV (en option)

  • HK Ghost Quad V4
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

ewb | Acheteur vérifié

  • Overall
  • Quality
  • Value

A really neat quadcopter

Dec 02, 2020

I like it, the quality was pretty good on my example. It does light up spectacularly at night too. People could mistake it for a UFO. The polycarbonate frame does have a little bit of flex to it, but not enough to be a problem. The frame should hold up well in crashes though.

lero76 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2016

Nice cheap frame kit that is very easy to setup. just note there is a bit of soldering as you would expect. it is a very stable platform and flies very well. Just be wary the legs are a bit easy to break but they can easily be made from something else to replace them. I made a new one from a small piece of aluminium and it works just the same.

VTPete | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 17, 2015

Like many, I snatched up a few of these in various colors during the 2015 cyber sale. They were practically giving them away. I found the lack of any instructions typically disappointing. But, I had put together the black models before so I pretty much understood what I was getting into.

The LEDs are definitely the reason to buy this. I find red and green to be poor choices for the bottom as I'm a bit red/green color blind and from a distance, it's difficult to determine orientation. Those of you with proper vision won't have any problems.

The power distribution board is a nice touch. Just remember that the 5V and 12V output pads are clean power for your flight controller and FPV equipment... don't try to power an ESC from the clean 12v pad like I did, or you won't get past 1/4 throttle on that motor.

The way your bolt down your PDB and FC to the frame is rather poor, but it works.

In summary, it's cheap. The plastic is indeed hard and brittle, but I haven't cracked mine yet. I think the bottom line is that after you spend over $100 for motors, ESCs, flight controller (and more for FPV), why would you want to put it all on a fragile frame? For me, it's a cheap and fun platform for spare parts. I'd buy it again, but not for building an FPV racer, just for a night time fun quad.

lee | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2015

Good kit, but absolutely no instructions! Luckily if you google "FPV 250 build" there are plenty of guides online.
Quibbles:
The motor mounting plates do not have holes to fit standard 4 hole motors. These will need drilling (or just don't use them and mount direct onto the arms.
The LED strips are not marked, apply power to each one before you mount to determine the correct colour.
The BEC on my dist board did not work for 5 or 12V, didn't matter as I use the one on my ESC.
This kit works brilliantly with a standard KK2.1 board. I bought a KK mini and so had to make an adaptor plate for it to sit on so it could sit above the dist board.
The protective cage on the top will not fit once you have the dist board and FC fitted. You will need spacers to raise it. You will then also need to drill and tap the fitting holes to take a nylon spacer rather than the small screws supplied.

peekay | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 07, 2015

I doubt anybody could complain about this frame. Using KK2 controller with firmware by Steveis. Baby beast 2206 motors and 12a afro speedy combo pack. Turnigy 3 cell 1400 mha battery and gem fan 6040 props, although the 5030 clear props it comes with are ok. Very stable, fast if required and easy to fly at night, I don't loose orientation as easily because the LEDs work awesome. The built it power distribution board is easy to work out. The motor mounting is a little confusing, you put it all together first or you can't slot the feet in later. Drill the mounting brackets a little bigger and use longer screws, but not too long so as to spear the motor windings.

Carsten | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 13, 2015

Ich liebe diesen Rahmen. Sehr gut sind die Leds im dunklen , aber auch im hellen zu sehen.
Auch ist der Rahmen stabiler als man meint. Nach einem rasanten Flip ist er mir
sehr hard aufgeschlagen. Es ist nur eins von den vier Landegestellen gebrochen.
Sie knnen sehr leicht ersetzt werden. Ich habe jetzt den blauen und den orangen Rahmen.
Bin einfach zufrieden.

Fichiers clients
No File Name Download [256]
No File Name Download [356]
No File Name Download [349]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires