Become a Dealer Blog
S'inscrire

Prix total

0,00 $US

Panier 0 Panier 0 Loading...

Commission de contrôle de stabilisation de vol HobbyKing i86AP

Generating Links

Commission de contrôle de stabilisation de vol HobbyKing i86AP

 
Prix:

Now save économisez 0,00 $US 0,00 $US

17,99 $US
Déjà acheté Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
070000009
Livraison gratuite? Cliquez ici pour apprendre plus!

Accessoires

Contrôlée par un micro-contrôleur à base Atmel Mega168PA 8 bits RISC et en utilisant une seule haute précision 3 axes MEMS gyro, la Commission de contrôle de vol de stabilisation HobbyKing i86AP est capable de stabiliser un vol sur à peu près tous les avions à voilure fixe! Il offre une stabilité supplémentaire en corrigeant automatiquement les canaux ailerons, profondeur et de direction en vol. Cela compense les changements non désirés dans l'attitude de l'avion en raison de vent et d'autres facteurs.

Il prend en charge normale, aile volante (delta) et v-queue des avions. Le mode peut être facilement sélectionné en changeant le cavalier à bord de quel type d'avion que vous avez besoin.

Léger et compact, le i86AP peuvent tenir dans le plus petit des avions et comprend un petit morceau de ruban adhésif double face à installer.

Caractéristiques:
Prise en charge, aile volante (delta) et des avions de v-queue, facilement sélectionnable par cavalier normale à bord
Prise en charge de vol 3D sans porter atteinte à la stabilité
réglage du gain du gyroscope indépendant pour les ailerons, la profondeur et le gouvernail
fonctions de réglage de base, y compris bâton de centrage et gyro inversion
Design compact et léger permet un montage dans le plus petit des avions

Spécifications:
Tension d'entrée: 4V à 6V DC
Sortie PWM: 50Hz, 1020-2020us
Échelle de Gyro: +/- 1000dps
Taux d'échantillonnage Gyro: 1KHz
Température de fonctionnement: -40 ° C à 85 ° C
Taille: 30mm x 40mm
Poids: 8g

Obligatoire:
3 x mâle à mâle servo plomb pour connecter le récepteur à la carte de commande


* Note: Mode d' emploi situé sous l'onglet "Fichiers" ci - dessous.

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

__Giba | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 30, 2012

No funciona. Quebrei dois avies por tentar usar esse estabilizador.
It does not work. I broke two planes for trying to use this stabilizer.

g2222 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 09, 2012

Quick Review:
Pros:
- Cheap
- Durable
- Works ok

Cons:
- on flying wings, you'll want to solder the rudder signal pin to another signal pin for the board to start properly
- not nearly as precise as my dedicated 2 gyros (which are twice the price of the board) on a flying wing
- consequently hard to find the proper gain setting, generally either the wing over correct (= wooble at high speed), either it under correct (= don't see much effect)

Probably better for planes/wings which aren't flying too fast/where precision settings isn't all that important.

rocketscience | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 22, 2012

What's great about this board is 1) size 2) pins out the side 3) can be used for delta wing. As mentioned already, make sure all 3 channels have input. So for delta wing, I used a Y splitter and sent aileron to the rudder even if there's no rudder. Or just send a signal to rudder from rudder (unused). But the Y makes it simple if you have a long run. Works great, my skyfun flies really steady now and fast. Not so scary to control now.

bgi82 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 15, 2012

i build it in my bixler one and i think its nice. my videos are much better to look because there arent so many shakes an so on from the wind. very nice. i ordered 1 more stabilizer for my nano racer,i think it would be much easyer to fly this fast 4s racer when you mustnt make korrections while you make loops and so on.

pete5996 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2012

Easy to fit and set up, this device has worked brilliantly for smoothing out the flight of a twitchy West Wings Fournier. It has made the difference between the model sitting unloved and rarely-flown to it now being a regular on the flightline! This stabiliser doesn't make you a better flyer and won't fly the aircraft for you - but it does make the flight look much more scale-like and the flying more enjoyable. Recommended. Just need HK to keep them in stock........
Don't forget the male-male servo leads!

ukrsonic | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2012

That thing crashed my SebArt Sukhoi-29 3D plane.
I tested that thing on the ground and it worked just fine. When I took off (gave max throttle), the plane started spinning itself and then it hit the ground without control. So before you start flying it check it with max throttle on the ground. Try to shake the plane in different angles.
I hope it helps.

rampage-1 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2012

Wow that Swift looks like it needs some work before it fly's. I don't know why HK would put this in the file section. The controller is great for the price.
It work as good as controllers like this twice the price. I am going to try HK Eagle Tree controller next.

Mechanik | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2012

. , , .
.
, , &#108

flying fool | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 01, 2012

I used the I86AP in a park zone T28 , It made it fly like it was on a rail. I think for the money it's a great item to help new flyers and also good to help old flyers train for three D flying. Have had no trouble with item after many flights. I will be buying more , please get them in stock. FLYING FOOL.

de-warehouse | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2012

Fr den Preis OK, leider nicht vom Sender aus zu justieren und nicht abschaltbar.

  1. 1
  2. 2
  3. 3
  4. 4
Fichiers clients
User Manual Download [381]
i86AP Portugues Download [13]
Must Read Download [29]
i86AP on Mini Swift Download [1381]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!