S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

HobbyKing Piper J-3 Cub 1.20 Glow 2310mm (ARF)

HobbyKing Piper J-3 Cub 1.20 Glow 2310mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
6560 g
SKU:
Piper J-3 Cub

Combinez

et économisez plus
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo Paquet

    Turnigy 5800mAh 4S 25C Lipo Paquet

    Vous économisez enregistrer 48,11 € 48,11 €

    Special Price 4,23 € 4,23 €

    You save enregistrer 48,11 € 48,11 €

    Prix normal  52,34 €

  • Turnigy 5000mAh 4S 20C Lipo Paquet

    Turnigy 5000mAh 4S 20C Lipo Paquet

    Vous économisez enregistrer 9,31 € 9,31 €

    Special Price 24,16 € 24,16 €

    You save enregistrer 9,31 € 9,31 €

    Prix normal  33,47 €

servo
motor
Description
du

Cette grande taille J-3 Cub ressemble vraiment la partie, il est livré avec un kit de matériel vaste qui comprend l'échelle difficile 1pc pleine de métal et de travail élastique châssis, du moteur factice, le réservoir et les raccords de carburant et ainsi de suite. La qualité de la cellule de construction est excellente et il est habilement recouverte d'un film authentique Cub jaune.

Conçu autour d'une lueur 1.20, ce modèle serait également un candidat idéal pour le vol électrique en raison de son accès facile, portes battantes des deux côtés, ce qui rend Lipoly changer un jeu d'enfant. L'aile est de brancher que vous attendez avec fasten rapide, authentique à la recherche entretoises métal / bois. Le train d'atterrissage est superbement réalisé et jailli en utilisant des bandes de caoutchouc qui peuvent être changés facilement et à moindre coût.

Ce grand Cub ferait un premier modèle à grande échelle idéale ainsi qu'un bon remorqueur de planeur, il est robuste et léger, mais pratique beau, prendre de nous, nous savons une chose ou deux sur Cubs modèle! Il y a énormément de modèle avion ici pour l'argent et avec la bonne mise en place, la construction des coûts sera également faible, sans aucun doute à ce sujet, ce J-3 est un vol!

Spécifications:
Envergure: 2310mm
Longueur: 1500mm
Poids en vol: 5300G ~ 5400g
Wing Chargement: 69g ~ 71g dm2
Airfoil: NACA-4412

A besoin:
Your Own 4 canaux TX / RX
5 x Servo standard
.90 2 temps ou 1.20 moteur de préchauffage 4 temps ou de gaz 20cc
RX Puissance

Product
Specifications

Informations supplémentaires

  • Référence:
    Piper J-3 Cub
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    6560.00
  • Longueur:
    1300.00
  • Largeur:
    375.00
  • Taille
    380.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My J3 Cub just arrived yesterday, and i just had to open the box to make sure it was undamaged. First impression is that its a very high quality kit. For the money you cant go wrong. It's bigger than it looks and will be very impressive out on the field. Have ordered an ASP FS120 and HXT 10kg metal gear servos for it. Will post some pictures as i start the build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have ordered one of these beauties. It will have the 160 brushless in it running on 6s lipo power. Should be powerful enough. Keep you posted
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall this gets 4 1/2 stars, only because of how well this flies. I have an ASP 91 4 stroke engine powering my Cub. The main wheels are terrible as is the tail wheel assembly. Get new ones of better quality. As with the other reviews the cowl and windscreen color is much darker than the covering but at 100 or so feet in the air this isn't noticeable. Main gear needs some longer bolts with self-locking nuts as the ones given will loosen after 2 or 3 flights. And, where can I get those rubber bands for the gear?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got it completed and flew the Maiden flight. It is a very easy ground handler with no tendancy to ground loop on rollout. Takes very little right rudder for a straight track on take off. The ailerons and elevator is fairly responsive and do not require large throws. Very stable in flight with a mild wing drop at stall with full up elevator. It recovers easily and quickly. Even though this model is 12.5 pounds (5600 g) it glides forever when you cut power. Easy landings either with no power or slight power applied. Elevator and ailerons remain effective even at slow landing speed. I run this with a G110 electric brushless motor, a 60A ESC and a 6 cell 5000mah LiPo. Draws 23A (550W) with this setup and flys scale like. If you want lots of performance run a 8 cell LiPo with this setup and it will give you 38A at (1173 W). Lots of work to complete this ARF but overall its well worth the effort and you end up with a scale looking plane with great flight characteristics.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This kit is fantastic, with opening doors on both sides, there's plenty of room for cameras. Looking forward to getting this big bird in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well as I get into the assembly of this ARF (I agree with the other post- its much more assembly than the normal ARF) I find that it is very incomplete. My Plane is missing Assembly instruction sheets, There was no horns or clevises for the control surfaces, No bolts for the landing gear even though the blind nuts were pre installed, No screws to attach the cowl, No extra hinge for the rudder to fuselage. Although the pushrod tubes were pre-installed there were no pushrods or cable for the pull-pull rudder. Also the cowl and windscreen were painted a much darker yellow than the covering. The tiny little .40 size tailwheel was unusable and the Main Wheels were bomber style and hard as a rock, and way to small for this model - again unusable. Most significant is Hobby King is ignoring me on how to get this remedied.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As I mentioned in the discussion section this is a beautiful Cub and very nice workmanship throughout. The manufacturer quality is lacking especially in packing. This particular ARF did not have any plans sheet or photos, The magnets and hardware for the doors were missing all together, The wire that connects the elevator halves together was missing as well. The wing tube fits very loosly in the tube installed in the fuselage. The painted cowl and trim on the windscreen are much darker yellow than the shrink covering and looks bad. The supplied wheels are very hard and unusable. This will be flown with a Turnagy G110 brushless and 6 cell LiPo. Ill post a flying review in a few days.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
BONJOUR QUI POURRAIS ME DIRE OU QUE JE POURRAIS TLCHARG LES PLANS DU PIPER CUB 2310 M MERCI A L AVANCE

MARIO .G
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Un 10 para esta semimaqueta, muy buen acabado y entelado, tiene cosas que se pueden mejorar, como la rueda de cola, pero realmente esta mas que bien por el precio. La recomiendo, perfecta para iniciarse en la gran escala, buen montaje y terminacion de las piezas, la presencia del avion es magnifica. En resumen los pequeos defectos que pueda tener se superan con creces con sus virtudes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Anyone know where i can purchase a wing set or the front cowl for this beauty?, Mines seem to have met the ground in an unforseen aeriel display ;(
Tried reglassing the cowl but still not happy with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo Paquet

    Turnigy 5800mAh 4S 25C Lipo Paquet

    Vous économisez enregistrer 48,11 € 48,11 €

    Special Price 4,23 € 4,23 €

    You save enregistrer 48,11 € 48,11 €

    Prix normal  52,34 €

  • Turnigy 5000mAh 4S 20C Lipo Paquet

    Turnigy 5000mAh 4S 20C Lipo Paquet

    Vous économisez enregistrer 9,31 € 9,31 €

    Special Price 24,16 € 24,16 €

    You save enregistrer 9,31 € 9,31 €

    Prix normal  33,47 €

servo
motor

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.