S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

HobbyKing PowerLog 6S Multifunction Monitor & datalogger

HobbyKing PowerLog 6S Multifunction Monitor & datalogger

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
165 g
SKU:
PL-6S

Combinez

et économisez plus
acc
Description
du

Les 6s HobbKing PowerLog est un faible coût, unité compacte riche en fonctionnalités qui en font un outil indispensable pour tous les modeleurs utilisant l'énergie électrique, son grand pour avions, hélicos, des voitures et des bateaux.

Un outil idéal pour garder dans votre boîte à outils pour les tests rapides mais suffisamment petit et léger pour être monté à peu près tous les modèles pour l'enregistrement des données, cette unité prendra toute la conjecture hors de votre configuration.

Caractéristiques:
Dimensions: 70mm x 38mm x 12.8mm
poids: 29g

Les fonctions:
Wattmètre avec affichage Volts / Watts / mAh / ampère / heure simultanée
Individuel Cellule Lipoly Surveillez jusqu'à 6s
Capteur de Temp Lipoly
En construction Infra Rouge tachymètre.
PWM Moniteur
PWM ouptut
Moteur KV mètres
Alarme de l'utilisateur [divers paramètres]
Logger
128x64 LCD rétro-éclairé Affichage

Comprend:
câble USB Mini
Temp Sensor Lead
Alarme Fil de sortie
Moteur KV plomb
Entrée / fils de sortie

Product
Specifications

Informations supplémentaires

  • Référence:
    PL-6S
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    165.00
  • Longueur:
    130.00
  • Largeur:
    42.00
  • Taille
    92.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very nice little gadget. I used it few times as a data logger to check and compare batteries and brushless motors.

I like the feature of checking batteries down to cell voltage and bidirectional current meter.

Now the cons: The labels are hard to read. I bought a white fill stick and filled all the labels so I can read it.

The Tachometer is practically useless for Helis, because you have to measure it from below which is real dangerous.

It is bit pricey too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've bought stuff through my friend, I happened to that time did not have an account hobbyking ...

hmmm ... 6s powerlog very difficult to understand for beginners like me. but I believe this tool has a great utility

cheers ..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
sweet, was just monitoring the temp on the hk battery powered heater while monitoring the draw on the battery. yesss.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This watt meter comes with the manual on a 'small' cd that I can't use in my drive, anyone know where I can download the user manual?

Thanks in advance,

W
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice data logger can log all types of info - receiver load & motor loads & battery peformance
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product with many kind of measure. Easy to use. Freeware soft to view data logged is in english or german. Upgrade software allow you to upgrade your powerlog. Take care of the artificial light when you check RPM motor : prefer the light of the sun to do that!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Love it, love it, love it!! I use this all the time to measure my Lipos and use the logging feature to log my battery performance/condition every month. Very easy to use and setup. Menu system is very easy to understand and navigate through. I recommend to read the manual to understand how it works for the first few usages. The unit itself is of good quality and all leads and connectors are good to use. Solder your connectors and off you go. There is a semi English/German software available to read your logs and works very well and easy to install and setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This device works as advertised, however on the one I received the firmware was way out of date.

In fact a couple of the functions were not available in the menus. Get v108 firmware from http://www.rcgroups.com/forums/showthread.php?t=1055820

and the upgrader software from http://www.jun-si.com/UploadFiles/Upgrader.rar

the update was easy and added the missing functions to my unit.


verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I do love this logger, its a little bigger, but lighter than my EagleTree eLogger V4.

It would be better if
- A cable for throttle logging was provided
- The RPM sensor was on wires, for postitioning in a suitable location
- The PWM Output power was provided from the deans connector (needs 5V connected to Temp Port)
- and the case was more sturdy, my case started seperating on day one.

But It does all the functions it says it does, so all in all a great device to have on hand.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice device, comes with the accessories to do all sorts of different measurements. There's active support by junsi for this product, so there'll probably be updated firmware available when you get it.



The brushless RPM monitor seems to use some of the same pins as the per-cell voltage measurement: not sure yet if this means you have to do one or the other or if you can still measure packs up to 5S at the same time as using one pin for the brushless motor probe.



Pity about the LogView software (a: it sucks, b: it's windows only), but the data transfer protocol's pretty simple so I'm dumping logs using Mac and Linux machines with software I wrote myself, then charting and analyzing it in spreadsheets or statistics software.



For those of you who know how to program, I use the hidapi library to access my device at vendor ID 0x0483 and product ID 0x5750. Start trying to read into a 64 byte or so buffer then hit transfer on the device. Log lines with my firmware version have no USB HID report code, and are 41 bytes long in the form (uint8 bytesInMsg, uint8 typeCode, uint32 loggingIntervalMs, uint8 state, int16 current, uint16 voltage, uint32 energy, int16[6] cellMillivoltages, uint16 rpm, int16 internalTempDegx10, int16[3] tempsDegx10, uint16 period, uint16 pulse). Multibyte values are little endian. The typeCode for these log lines is 0x11, or 0x10 if you're doing online logging. Some control lines are also included in the log: these have a typeCode of 0x20, followed by a
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.