New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing Saturn F3P Ultralite EPS 3D Indoor Avion 920mm avec moteur (Kit)

HobbyKing Saturn F3P Ultralite EPS 3D Indoor Avion 920mm avec moteur (Kit)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000006
WANT FREE SHIPPING? Click here to find out more!

Ceci est l'un des modèles 3D intérieurs ultimes F3P disponibles!

Construit à partir d'une combinaison unique de panneaux de mousse, film de poids léger et le renforcement de carbone. Le résultat est une cellule extrêmement léger qui est plus rigide que la plupart des intérieurs voltige «pleine de mousse». Nous ne sommes pas kidding - Les conseils de la cellule nue les échelles à un minuscule 92 grammes et il est fou rigide!

La Saturn est une machine à F3P qui signifie des affaires, il a des caractéristiques de vol précis, est exempt de fuselage torsion en vol et de la lumière Uber en poids!

Ce kit comprend un balai outrunner 1500kv et GWS style de 9 x 5 hélice, avec aérofreins en option pour les gars de hardcore.

Spécifications:
Envergure: 920mm
Fuselage Longueur: 1060mm
Moteur: Brushless 2206 1500Kv Outrunner (Inclus)
Hélice: 9x5 (Inclus)
Poids en vol: 200-230g (Vol prêt)

A besoin:
ESC: 10-12Amp
Servos: 6-8g micro servo x 3
Radio: 4 canaux
Batterie: 7.4v 2S 400-800mAh Li-po

  • UGS 9095000006
  • Brand HobbyKing
  • Capacité ( mAh ) -
  • Poids 1150.0000
  • Longueur 950.00
  • Packaging Width 70.00
  • la taille 280.00
  • HK Mini Saturn
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Flying with 10 amp plush ESC, 500 mAh Zippy compact lipo's and using HXT500 servos.

Very well packaged. Carbon rods have stickers attached giving their length. The full colour manual clearly shows where each rod needs to go so you can't go wrong. Mine needed 20 grams of lead in the nose to balance to recommended CG, but I may remove some lead when I get more into 3D.

Only reason I've given it four stars for quality was mine was missing the landing gear baffles. No big deal and it looks fine without them.

Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flying with 10 amp plush ESC, 500 mAh Zippy compact lipo's and using HXT500 servos.

Very well packaged. Carbon rods have stickers attached giving their length. The full colour manual clearly shows where each rod needs to go so you can't go wrong. Mine needed 20 grams of lead in the nose to balance to recommended CG, but I may remove some lead when I get more into 3D.

Only reason I've given it four stars for quality was mine was missing the landing gear baffles. No big deal and it looks fine without them.

Highly recommended.

Just received it today.

Package is clearly serioux. All is carefully packed and tape to the box. If the plane is broken, then it means that the box is broken to. Building manual, propeler, Motor, building hardware (rods, wire...)



A very nice plane I can't wait to put it the air.



plusplus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received it today.

Package is clearly serioux. All is carefully packed and tape to the box. If the plane is broken, then it means that the box is broken to. Building manual, propeler, Motor, building hardware (rods, wire...)



A very nice plane I can't wait to put it the air.



plusplus

Nice little plane but build is not for a beginner. A little tricky and fiddly and instructions could have used a few extra detailed steps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little plane but build is not for a beginner. A little tricky and fiddly and instructions could have used a few extra detailed steps.

I purchased this model the same time I bought the MXS. It came well packaged, no broken or missing parts. Assembly was straight forward and a lot easier than the MXS. I used foam safe CA on this model compared to 5 min epoxy on the MXS. I used the same set up as the previous model, Turnigy 1800 servo 3 pack, 10A HK ESC and a 370 Nanotech 2s battery. The pull/pull set up for the elevator and rudder is a bit tricky, but is a good system once it is rigged. This kit is much better made than the MXS. Depron is thicker and isn't as fragile. The covering is still loose fitting. Do not try to iron out the looseness it will warp any part you try it on. Run up was very nice, no evil noises or malfunctions. Power was perfect for the model, will hover just over 1/2 throttle. Flying couldn't have been easier. It is slightly larger and heavier than the MXS, but wouldn't recommend flying outside if there is much of a breeze. Inside it flew briliantly. Only very minor trim was required and slow flying was very easy. I was very comfortable with it after only a couple of flights. I didn't have any issues with it so far. I'd recommend this model over the MXS, but I like them both, thanks again Hobbyking...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this model the same time I bought the MXS. It came well packaged, no broken or missing parts. Assembly was straight forward and a lot easier than the MXS. I used foam safe CA on this model compared to 5 min epoxy on the MXS. I used the same set up as the previous model, Turnigy 1800 servo 3 pack, 10A HK ESC and a 370 Nanotech 2s battery. The pull/pull set up for the elevator and rudder is a bit tricky, but is a good system once it is rigged. This kit is much better made than the MXS. Depron is thicker and isn't as fragile. The covering is still loose fitting. Do not try to iron out the looseness it will warp any part you try it on. Run up was very nice, no evil noises or malfunctions. Power was perfect for the model, will hover just over 1/2 throttle. Flying couldn't have been easier. It is slightly larger and heavier than the MXS, but wouldn't recommend flying outside if there is much of a breeze. Inside it flew briliantly. Only very minor trim was required and slow flying was very easy. I was very comfortable with it after only a couple of flights. I didn't have any issues with it so far. I'd recommend this model over the MXS, but I like them both, thanks again Hobbyking...

magnifique avion indoor, tres joli avec son entoillage transparent.. la legerete n'est pas transcendante car il faut compenser le manque de matiere par du carbone. mais tres reussi cote esthtique !!! et vol vraiment bien...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

magnifique avion indoor, tres joli avec son entoillage transparent.. la legerete n'est pas transcendante car il faut compenser le manque de matiere par du carbone. mais tres reussi cote esthtique !!! et vol vraiment bien...

Great indoor plane flys very well and slow without damping boards. The film covering needed checking over as it had lifted on the hinged surface. With a iron turned down to 10pcnt quick test on a edge run the iron over the lifted surface to stick the film down again. I ran the iron over the leading edges to be 100pcnt. Great job Hobby King used all reconvened parts in purchase 192grs with battery.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great indoor plane flys very well and slow without damping boards. The film covering needed checking over as it had lifted on the hinged surface. With a iron turned down to 10pcnt quick test on a edge run the iron over the lifted surface to stick the film down again. I ran the iron over the leading edges to be 100pcnt. Great job Hobby King used all reconvened parts in purchase 192grs with battery.

No Regrets 3D plane; Very lite ; Fantastic to learn all maneuvers without fear ; Nothing it can't do . Added an extra carbon fiber flat rod at edge of wings and top and rudder top ( in case of inverted landing) . Excellent characteristics with 420mAh battery .. cG at aft of recommended in manual for 3D maneuvers. See uploaded second video in Video section

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No Regrets 3D plane; Very lite ; Fantastic to learn all maneuvers without fear ; Nothing it can't do . Added an extra carbon fiber flat rod at edge of wings and top and rudder top ( in case of inverted landing) . Excellent characteristics with 420mAh battery .. cG at aft of recommended in manual for 3D maneuvers. See uploaded second video in Video section

great plane today i will fly it for first time

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great plane today i will fly it for first time

Customer files
SATURN MANUAL UK Download [4448]
653253988X638208X39.pdf Download [4448]
SATURN MANUAL UK Download [4448]
SATURN MANUAL UK Download [4448]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save