Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing Sbach 342 Gas 50cc 2210mm (ARF)

Generating Links

HobbyKing Sbach 342 Gas 50cc 2210mm (ARF)

Prix:

Now save économisez 0,00 € 0,00 €

427,86 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
sbach50cc
Livraison gratuite? Cliquez ici pour apprendre plus!

Cette superbe Sbach recherche 342 est un moyen, la machine 3D pur! La superbe construction ultra-léger, qui dispose d'un fuselage de la colonne vertébrale bâchés pour la force, maintient le poids de vol minimal, en couple cela avec un moteur à gaz 50cc ou Turnigy Rotomax moteur brushless 50cc équivalent et vous avez la performance verticale illimitée!

Les ailes et les stabilisateurs horizontaux sont branchent pour faciliter le transport, les Tailfeathers ne sont pas drap plat mais pleine voilure, les surfaces de contrôle sont facilement assez grand pour maneouvers 3D. Rudder est de tirer / pull et une balle haute qualité liée barres de contrôle sont utilisés tout au long de la précision et de fiabilité. Le revêtement pré-appliqué est brillant et d'un très haut niveau, la palette de couleurs est idéal pour l'orientation et semble superbe dans le schéma classique Sbach. Ceci est un modèle 3D de haute qualité qui est aussi un dépliant du sport tous les jours idéal lorsque mis en place sur les taux bas, de toute façon, est un vrai artiste et un vrai looker!

Caractéristiques:
Branchez aile et stabilisateur horizontal
schéma de couleurs à l'échelle pré-appliquée
Alloy re-appliquée sous-chariot de montage
lien Ball clevices avec des barres de commande ridoir
matériel complet y compris le système de carburant
Alliage anodisé dot de carburant inclus
bras d'extension servo inclus

Spécifications:
Envergure: 2210mm
Longueur: 1980mm
Wing Zone: 92dm2
Voler Poids: 6.6 ~ 7.2g

A besoin:
Your Own 6 canaux TX / RX
6 x MG High Torque Std numérique taille Servo
50cc ~ 55cc moteur à gaz
UBEC / régulateur
Batterie Lipoly RX

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

East_Wing | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 25, 2015

I OWN THIS MODEL. received it less than a month ago (July 2015). If your looking at buying this model it is nothing like what is shown other than that it's a Sbach model. The model shown is the photos is basically a Pilot RC model but is not even close to what you get when you order it. I has a fixed firewall not adjustable. The hardware for your silencer is not part of the kit. there is no manual PERIOD, hardware is quite cheap. Also the wings may say 2210mm or 89" but the fuselage is quite narrow even smaller than my 25pcnt Extra 300. My 89" AJ slick makes this look little. The plywood for the frame is very soft and does NOT feel like aircraft quality plywood. Hope this helps anyone looking at this model. One more thing, the video is worthless unless you go and buy a Pilot RC Plane it won't help a bit for the plane they send out.

james | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2015

You have done it again hobbyking. I have seemed to have had a great run with you over the past 3 years! I have just got back from yet another awesome day flying with this model.....i have put it through its paces and still after 2 years it is going strong. No complaints what so ever over this time. Thankyou!!! Ill post videos in the files page

Stefan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 25, 2015

Modell ist nach dem was geschrieben wurde sehr viel besser als erwartet. Nix defekt, alles dabei, Stiftscharniere, Kugekpopfanlenkung Servohebel Verlngerung top, absolut super zu diesem Preis unschlagbar! HR Servos im Hhenruder verbaut, geile Kiste.

ALFA11 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 02, 2013

Sbach 342 50CC .... SPECTACLE OF PLANE .... VERY VERY GOOD ......
Building facil ...
Pretty good, considering the price ....
-I think the cable tail a little thin ....
- Improve the way to install the canopy
The rest of this very good ....

Netmav | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 31, 2013

Very decent piece of kit! The plane looks great, and the build quality was actually better than what I expected it to be, but the harware package is another story.. Quite a bit of parts missing, and the nylon wing bolts had different threads than the blind nuts in the wings, so I had to use some M6 stainless steel bolts for the maiden. No big deal, but a little frustrating.. I installed an RCG50 engine in it, with a 22x8 carbon prop, and it was an absolute blast to fly! It looks so incredably good in the air, and I can't wait to get more flights on it! I really reccomend this airplane if you are looking for a cheap, quality 50cc acrobat! (NOT for beginners/inexperienced modellers, though)

artta | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 07, 2013

Build quality is decent. Hardware is low quality. Almost all nyloc-nuts are missing nylon insert so those are crap. Landing gear is aluminum and really heavy. Tail wheel bracket and fixings are way undermatched so replace that one with aftermarket part. Instructions are somewhere between lousy and crap. Download pilot-rc manual for clarification. Landing gear supports (aluminum L-Bars) from fuselage were totally missing, same with cowling lower mounts. Wing tubes fits, so no problem there. Anti-rotation pins form stabs and wing are poorly glued. Do those again.

Delivery was funny. It came with totally different transport company with no tracking at all. The tracking code I got was never even active. Canopy has two cracks and cowling is poorly painted.

If you have some experience with building these kind of models, go ahead. If you don't, buy a pilot-rc.

ericetadja | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 13, 2013

Nice build. The covering is well applied. The wing tube fits in the fuselage, maybee this problem has been fixed (or i'm lucky). The harware is medium quality. I thing i'll change the control rods and hinges. Landing gear seems "soft" but i have the carbon one from my former sbach (kissed a tree) 2 crows is for the canopy. It arrived with 2 cracks on his left side. There is dust everywhere under the black paint and the varnish has been very badly applied. The canopy is not clear at all and his whole surface is like orange skin. Beurk. Is there a control before delivery????
So overall, the kit is ok except for the canopy who should not have been sent. I'll have to spend tme trying to fix it.

Elad | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 30, 2013

This is NOT the perfect kit like you would imagine... I had an original pilot-RC 50cc Sbach before this one and this hobbyking version seems like it's the old-version pilot-rc kits. There will be many bad & missing parts like. For example, they give you 4 X 80mm pushrods that is unusable because you need 2x 45mm and 2x 160mm. Missing many m3 screws and nuts etc'... Hobbyking didn't respond to my request for the missing/replacement parts.

Also, you'll need to work really hard to make this kit fly. For example, both wing and elevator aluminum tube did not fit the holes. I literally spent 10 hours scrubbing the holes to fit the tube. It was very frustrating.

Shipping was about $130 to Los Angeles... What a ripoff.

I advice is get the real thing directly from the manufacture. Not through HK.

STORMY | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 10, 2013

Just put three flights on my new Sbach and apart from a few niggling small problems, (wing tube needed sanding down to fit etc.) this is a very nice flying machine.
Hardly any trim alterations needed, I am delighted with it, for the money it's an awful lot of aeroplane and very well constructed.

akroblade954 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2013

My 50cc Sbach arrived from UK warehouse within 3 working days of placing the order. Quality perfect as far as I can see so far, but I have just got to say WOW!!! I have 50cc and bigger models, but this is so much bigger and better than I expected. I am soooo glad I checked for stock every day for over a month to get this one! Will report back when I build it...

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!