Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing Super-H 600 QuadCopter (KIT)

Generating Links

HobbyKing Super-H 600 QuadCopter (KIT)

Prix:

Now save économisez 0,00 € 0,00 €

39,01 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
366000012-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Êtes-vous malade de la photographie aérienne des navires de la caméra à la recherche comme un OVNI et le vol lent et lisse comme vous prenez grand-mère pour une promenade autour du bloc? HobbyKing vient à la rescousse avec le nouveau Super-H 600.

Le nouveau Super-H 600 est un 600mm classe sportive volant H configuration quadcopter. La mise en page optimale permet de tout votre équipement à monter en toute sécurité entre les plaques de cadre et sur la ligne médiane pour une maniabilité maximale. Le cadre supérieur a des dispositions pour des billes d'isolement 12 de vibration permettant jello FPV libre et l'enregistrement vidéo HD. L'avantage de l'isolement d'une plaque propre et sale permet également d'avoir des valeurs PID du régulateur de vol serré pour une belle multirotor sans vacillement serré. Les bras éprouvés et facilement disponibles pour un remplacement en cas d'un «mouvement casse-cou mal passé" facile et pas cher. La mise en page de cadre peut gérer une vaste gamme de batteries et de l'équipement et comporte des dispositions pour la caméra et transmet cardans de montage.

Si vous êtes prêt pour un amusement et pourtant utilitaire quadcopter le Super-H 600 dépasse toutes les attentes.

Caractéristiques:
• Prop vue libre avec H layout
• Construit à partir de fibre de verre de qualité et de nylon polyamide.
• Pré-threaded manches en laiton pour tous les boulons de cadre.
• Bras de couleur pour l'orientation pour vous garder voler dans la bonne direction.
• matériel en aluminium anodisé
• Crochet et tige options de montage
• pattes de montage grandes sur la plaque principale de fond de cadre pour le montage facile à la caméra.
• Montage facile
• Les provisions pour un cadre d'isolation vibratoire propre et sale

Spécifications:
Moteur au moteur diagonal: 600mm
Poids: 599g
Montage du moteur: 16 ~ 19mm
Cadre longueur de la plaque: 500mm

* Note: Ce cadre comporte des dispositions pour un maximum de 12 amortissement des vibrations balle pour un système propre et sale, le cadre est livré avec standard entretoises en aluminium. Les billes de vibration sont vendues séparément et devraient être choisis en fonction du poids donné du châssis supérieur chargé.

  • HobbyKing Super-H Quadcopter Frame
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Fran vamo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Calidad

May 25, 2020

very good value for money, value for money very good, support sheets somewhat thin but give good consistency, made lack of central support to house the controller and a power distribution tray, that would be very good, they would only have to redesign the center sheet of the frame.

Andreas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2016

I used this frame for a short time, because the holes are done badly. With well balanced 15" props there are too much vibrations even for a gimbal!!! It's not stable at all. When you will use it, use it with small motors and 12" props max. The max flight time I got with it was 30min, but it wasn't a nice flying via fav, because of the vibrations I hardly could see anything!!!

Janaka | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

What a waste. You get what you pay for. I ended up with genuine CW props and knock-off CCW props, and the slight difference in thrust at the same motor RPM caused the frame and super flexible arms to twist and yaw the quad in circles. Though correctly matching props are clearly called for, the HUGE amount offlex in the arms and lower / dirty frame of this quad made it a complete waste of my time to build. My AUW was around 2.5kg - I tried to build this around a 6s 4000mah system and a mid-size gimbal and camera. I suspect this would only work with a GoPro and a lightweight setup.

jamie | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Awful kit. Don't buy it. Very flimsy, not well machined. The frame is not symmetrical when assembled.

pat12 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2015

simple fantastic. i have not used this for long but it is my first Quad copter frame and i think that it has been a good one to chose. I have been using it on grass and it has suffered lots of accidents but all in all it was great and there is NO damage to the board. i would recomend you use the NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) motors and the Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware) ESC's with Slow Fly Electric Prop 12x4.5R SF (4 pc - Green Right Hand Rotation) propellers as well as left hand turning ones and a 4 cell battery for me this set up has worked great. thanks for reading this, cya

Tarek | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 04, 2015

You pretty much get what you pay for. I've ordered this frame before and it was beside one drill hole fine. The second was missing all the drill holes for the rubber balls. Not a big deal for me. And the rest of the frame is descent and if you crash it (like I did), the replacement is not that big of a deal. I recommend this frame.

Zebolc | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2015

This is nice big frame with a lot of space on it and it is cheap.
However it has few drawbacks:
- it is heavy, 500g
- arms could be longer, they can fit maximum 13" props
- little too elastic for my taste
- plates are made of tick plexiglass (12.5mm) instead of carbon fiber
- there are no hols for rubber dumpers, and once you drill it your self those holes violate structural integrity of plates
- holes made for gears on plates are made in a way that makes you difficult to attach some of your gears so you have to improvise

All 4 arms are black but I like it that way, it looks cool, and if you want better orientation you can put some colorized LEDs.
I have put some pictures in file section of my build. I'm using Multistar Elite 4007.740 motors, 12" 5.5peach propellers, 4.5Ah 3s battery, Crius v2 FCB and 20A Afro Slim ESC. total weight is 1750g, but I plan to add one more 4500mAh battery and d13" 5.5peach props. That should give me 15 minutes of flight time with good maneuverability.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 14, 2015

This is a great frame. I have 14 inch blades on this build. If you do Use 14 inch props you will be cutting in close but still it makes for a nice long flight time! I suggest the use of m3x11MM vibration isolation grommits! They fit well! Enjoy!

Maksim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

2210 turnigy

DodgeHobby | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2015

A lot of gear for little money!

Nice easy build, some spares in mine (I hope they're spares!) And plenty of room. SJ400, APM GPS, 4x ESCS, FrSky Rx, FPV cam, Vtx and batt. And enough room to fit it all on again.

  1. 1
  2. 2
  3. 3
Fichiers clients
No File Name Download [3519]
folding version Download [476]
folding version Download [476]
folding version Download [476]
perfectly tuned and tested build i have Download [391]
front view of gimbal mount with out cont Download [3130]
top view of just mounted gimbal Download [2969]
side view of my gimbal mounting system Download [3438]
Quad Just built and flown Download [558]
No File Name Download [3035]
  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires