Le kit de planeur HobbyKing Ventus OEB dispose d'ailes amovibles pour faciliter le transport, un système de retrait d'aluminium et les volets de travail. Terminé en mousse EPO le planeur HobbyKing Ventus possède une finition lisse et brillant qui vous fera à travers l'air à la recherche de la prochaine élévation thermique.
La longue envergure (2.3m) et courte aile corde font un planeur rapide, pour assurer une performance agile ailes principales ont des tubes en fibre de carbone jumeau plus un insert en alliage. Les débarquements sont lents et prévisibles avec rabats vers le bas.
Le H-King Ventus est une grande qualité, design original vous ne trouverez pas ailleurs.
Le HobbyKing Ventus comprend également un spinner et cône de nez vous permettant de choisir entre une configuration alimenté ou non alimenté. couvercles Servo, barres de commande et tout le matériel général nécessaire pour compléter ce modèle sont inclus. Vous aurez besoin de 6 x 9gram servos pour les surfaces de contrôle et 1 x 17gram MG servo pour le train d'atterrissage, un émetteur à 6 canaux et le récepteur (Tx / Rx) et soit une batterie de récepteur (pour une configuration non-Powred) ou le moteur, ESC et Lipoly batterie détaillé ci-dessous.
Assurez-vous de commander des fils d'extension de servo. Ces ailes sont longues.
Matériel: EPO Foam
COG: 30mm de la racine de l' aile (1er Carbon Spar
Moteur: 28xx 900Kv moteur Brushless (obligatoire)
ESC: 25A Brushless ESC (obligatoire)
Servo: 6 X 9g Servo, 1X 17g Servo (Obligatoire)
Batterie: 11.1v 1000 ~ 1500mAh (Obligatoire)
Hélice: 8 X 6 Folding Prop (3.17mm convient arbre moteur) (Inclus)
Moteur: 28xx 900Kv moteur Brushless
ESC: 25A Brushless ESC
Servo: 6 X 9g Servo, 1X 17g Servo
Batterie: 11.1v 1300mAh ~ 1600mAh
Remarque: Ce modèle est le double boîte pour vous assurer qu'il arrivera en toute sécurité.
Capacité ( mAh )
michael 5 points - 14/05/2013
summary of building notes and Hobby King - The basic body and wings were great the fitting out was fine but the niggles of no instructions and no way of fixing horns was frustrating,hence my effort to write same. I contacted Hobby king re monor shortages on another kit and had no response.Am I writing on here to be ignored.I see on the RTF site that overheating was a problem and the modeller concerned was cutting holes in the fus and was considering fitting a smaller prop/ Will my *85 receiver melt and is hobbyking aware of this and if so what are they doing. They have a duty of care and could be liable in law 'not fit for purpose'.I await answers. What a shame when it is a good looking well produced body shell,spoilt for need of testing and a few coppers to make it an excellent kit.
michael 5 points - 13/05/2013
as promised building notes The Hobbyking 'Ventus' 2.3 metre powered sailplane. Purchased as a kit April 2013 approximately *50 sterling. Building Instructions :- First of all check the components and ensure with a dry run all the component parts are there. 1 . fit all the servo,s 4 in the wing need special care as is would be easy to cut through into the upper wing. Next fit the elevator servo 9mg for the rudder and the 15g servo for the retract wheel on the ply board as cut out. Cut and fit the snake link and epoxy iKam mit gebrochenem Seitenruder bei mir an. Achtung: in die 4 Aussparungen im Flgel passen keine 9 Gramm Servos, hier mssen 5 Gramm Servos zB: HXT500 eingebaut werden. Ansonsten macht der Segler bisher einen guten Eindruck.Perfecto velero para el precio que tiene.Es un poco rapido para los tipicos veleros, te da posibilidad de hacer muchas maniobras con el.El unico pequeo inconveniente es que viene sin instrucciones de montaje,pero es muy simple, requerira de algun ajuste segun los servos que se vayan a utilizat pero en general muy buena relaccion calidad precio.Took the plunge even after hearing HK model purchase horror stories. I dropped the money for the kit version and overall am very pleased. Model arrived quickly from US warehouse double boxes all parts sealed in plastic along with cardboard inside the box separating larger parts from each other and inflatable shipping pillows inside. Excellent packing!
Opened the model all parts are complete and all foam parts of the plane are in excellent shape and look very sturdy my first impression was "wow this was only $64 dollars". Will start assembly when I get the correct prop adapter for this.
The prop adapter it comes with is larger than the motor suggested in the combine related items window. That motor has a 3mm shaft the spinner included in kit is for 3.17mm. That is about my only complaint with this kit, and a slight mishap with a cutting knife on one side of the canopy, which I can really live with. Well worth the money and I'd make the purchase again even knowing what I do now.GOOD NEWS: this kit is V2 ventus version!
With all wing reinforcements in carbon. I also got the PNF version, believe me , just forget it and buy this kit and build it with good material.(I had to rebuild my PNF 80pcnt)
One trick: remove the gear and use the place for the battery then your COG will be perfect.(4,5cm from the front of the wing).
Flying weight is 1120g.
This is a fast glider, not for RC beginners.But it can land slowly thanks to flaps.This glider is a great kit that goes together well but it helps to have done some building as some bits are a bit tricky. The hinged ailerons and flaps are quite stiff and I found that I had to add a backing plate and screws to the control horns to stop them being pulled out of their slots after epoxying them on. Also don't forget to install the aluminium sleeve with the two grub screws before you join the halves of the fuselage together which holds the wings together duing flight. Long extension wires are required also as the servos are a long way out on the wings. I am using a 28/26 1000Kv motor 315watt http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=29824
but it is quite tricky to install as there is not easy access to the fire wall etc. I also found I had to reverse the shaft which was a pain as I had to dremell a little groove in the opposite end for the little clip to hold the shaft in. The plane balances perfectly with a 2200 3S nano tech battery so not sure why they had to add tail weight in the HK video. Overall a great plane and the carbon fibre in the wing is excellent. The wing spar is sloppy so I might replace that with a better fitting one. Also added magnets for the canopy hatch.I have bought this floater because a special offer was done because I showed interest. The discount was disappeared during checkout.
I am now very disappointedao contrario do que dizem este aviao muito bom, tem bons acabamentos, tem um EPO muito denso, tem muito apoios nas asas, em relativamente leve, tem um voo muito suave a rapido.
Contrary to what they say this plane is very good, has good finishes, EPO has a very dense, has much support in the wings, in relatively light, has a very smooth and fast flight.Kit is really good and the finishing is very smooth.
Wings are reinforced with a carbon spar and carbon strips for the trailing edge are included.
The propeller in the kit is a 10x6 and the spinner diameter 44mm.
This is the V2 ventus, not the first one with flexible wings. Now they are massively strong.
If you want to get a good discount you'll find a buddy code valid until the 21st of October on r c s e a r c h . i n f o
Just write ventus on the search.Brought from the Aus warehouse along with another model, arrived in 4 days! Excellent quality model, the surface finish is extremely smooth, this is the V2 and has the upgraded wing spars, very strong! The boom to tail join is a bit iffy and will be using thin carbon rod to add strength. Will be using a 70mm EDF instead of a motor/folding prop setup, more for fun than soaring!