Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing Wireless Battery Tracker w / Free 869.5Mhz Batterie

Generating Links

HobbyKing Wireless Battery Tracker w / Free 869.5Mhz Batterie

Prix:

Now save économisez 0,00 € 0,00 €

28,81 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
HK-Traker8695
Livraison gratuite? Cliquez ici pour apprendre plus!
Vous aimeriez pouvoir connaître votre tension de la batterie Lipoly pendant que vous voyagez?
Voulez-vous être en mesure de savoir avec précision quand votre pack est sur le point de laisser tomber la tension?

Le Nouveau - & - Amélioration de la batterie sans fil HobbyKing Tracker surveille votre LiPoly via la prise de charge et renvoie un signal à votre récepteur. Si l'une de vos cellules descendre en dessous de 3.6v la LED pour cette cellule devient rouge. Une fois que la cellule tombe en dessous de 3v la LED clignote et l'avertisseur sonore émet un bip, la signalisation d'atterrir le plus tôt possible.
Cette unité est également un excellent moyen de trouver ces batteries qui tombent tension grandement sous charge.
L'émetteur fonctionne sur 869.5Mhz bande FM et peut surveiller 2S à 6S batteries.

Spec.
Transmetteur Poids: 7g
Récepteur Poids: 35g (ce qui est la partie que vous gardez dans votre poche)
distance de signal: Autour de 300-400mtr
Batterie: 7.4V / 2 cellules (inclus)
Usage;
Vérifiez que le récepteur portatif est allumé et que vous avez sélectionné le nombre de cellules en premier. Une fois cela fait, puis connectez l'émetteur à l'intérieur du plan de la prise de la balance des batteries. Si vous ne le faites pas dans cet ordre, la lecture sera incorrecte.
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

giovanni | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2012

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

johnno | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2012

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 24, 2011

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

Anthony | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2010

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

isaac509 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

Sunwalker | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 03, 2010

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 30, 2009

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

Valek | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2009

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 18, 2009

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

TERRY270 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2009

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!