S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

HobbyKing Wireless Battery Tracker w / 869MHz batterie gratuit

HobbyKing Wireless Battery Tracker w / 869MHz batterie gratuit

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
149 g
SKU:
HK-Traker869
Description
du
Vous aimeriez pouvoir connaître votre tension de la batterie Lipoly pendant que vous voyagez?
Voulez-vous être en mesure de savoir avec précision quand votre pack est sur le point de laisser tomber la tension?

Le Nouveau - & - Amélioration de la batterie sans fil HobbyKing Tracker surveille votre LiPoly via la prise de charge et renvoie un signal à votre récepteur. Si l'une de vos cellules descendre en dessous de 3.6v la LED pour cette cellule devient rouge. Une fois que la cellule tombe en dessous de 3v la LED clignote et l'avertisseur sonore émet un bip, la signalisation d'atterrir le plus tôt possible.
Cette unité est également un excellent moyen de trouver ces batteries qui tombent tension grandement sous charge.
L'émetteur fonctionne sur 869.0Mhz bande FM et peut surveiller 2S à 6S batteries.

Spec.
Transmetteur Poids: 7g
Récepteur Poids: 35g (ce qui est la partie que vous gardez dans votre poche)
distance de signal: Autour de 300-400mtr
Batterie: 7.4V / 2 cellules (inclus)

Usage;
Vérifiez que le récepteur portatif est allumé et que vous avez sélectionné le nombre de cellules en premier. Une fois cela fait, puis connectez l'émetteur à l'intérieur du plan de la prise de la balance des batteries. Si vous ne le faites pas dans cet ordre, la lecture sera incorrecte.
Product
Specifications

Informations supplémentaires

  • Référence:
    HK-Traker869
  • Brand:
    HobbyKing
  • Poids (g)
    149.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is not a good product. Mine works as long as the transmitter is less than one meter from the receiver. The transmitter label is pasted on backwards, reversing + and - indications. The receiver battery is a 1S lipo and I charged it first. There is nothing written on it so I charged it at .1 A. I would give it zero stars but that is not a choice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not recommended. Beeps all the time when throttle is on. Really unuseable...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Con un motor de alto consumo te avisa de bateria baja con normalidad ya que si el voltaje de la bateria baja por debajo del minimo que opera el aparato salta la alarma pero al cortar algo de gas para la alarma, es muy util cuando vuelas cerca y con un avion poco planeador.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great!

Starts beeping intermittantly when my battery is at about 50%, beeps continuously about 1 minute before my low voltage cutoff happens. Very good investment!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought two of this and use them in my twin motor catamaran with two 4S 5000mah Turnigy li-pos and this "tool" is very helpful to protekt your cells.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice product.The only thing that wasn't good was the bad battery that was included.I use it with another battery which is external cause it is bigger.No reply to my email at all and no spare battery to buy extra for this item...Anyway... if you are lucky and your battery is ok , then this product is fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It works butt it beeps earlier then what i want.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First, there was only partially function. Then i have found out, that the connector case-side makes not sure connection, it seem's to bee a little smaller with the pins. So i have soldered an other one (f)-JST, and since there, it's perfect!

I also have mounted a little 2S-Buzzer for the internal Lipo on top of the case.

This is a absolutly perfect tool, and i'dont want to miss them - and it's also fantastical cheap!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This item is working exactly the way it is described. A very good solution for my receiver lipos that power my Turnigy Power Unit for my bigger planes instead of placing a volt watch that needs another channel on the receiver.

The only con about this unit is wether shall I be able to find a spare receiver lipo with the same specs???? Thanks HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
, .. . , ,
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.