Pays
États-Unis
 
Shipped From:
  • United States (US)

HobbyKing X550 en fibre de verre Quadcopter Cadre 550mm

HobbyKing X550 en fibre de verre...

Le HobbyKing X550 est un pliage-bras trame de haute qualité de quadcopter qui offre de grands regards et de la performance à un prix qui ne peut pas être battu! Construit à partir de poids léger en fibre de verre mais rigide et de l'aluminium...
9323000036

Now save enregistrer 0,00 € 0,00 €

21,82 €
447g
9323000036


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description

Le HobbyKing X550 est un pliage-bras trame de haute qualité de quadcopter qui offre de grands regards et de la performance à un prix qui ne peut pas être battu! Construit à partir de poids léger en fibre de verre mais rigide et de l'aluminium, le X550 offre une excellente combinaison de gain de poids et de la force.

Ce quad dispose de pliage des bras qui le rendent facile à transporter et à stocker. Les bras sont également deux couleurs différentes pour l'orientation, argent et rouge, il est donc facile de garder votre quad volant dans la bonne direction.

Ce cadre de quad prend également en charge une caméra d'inclinaison de montage en option qui permet de transporter une grande variété de caméras. (S'il vous plaît voir les articles connexes ci-dessous pour monture de caméra en option)

Nous offrons une gamme complète de l'électronique multi-rotor comme le multi-rotor carte de commande, ESC, moteurs et plus, il n'a jamais été plus facile ou plus abordable pour obtenir un quad dans l'air!

Tout le matériel nécessaire est inclus, il suffit d'ajouter vos propres appareils électroniques.

Spécifications:
Poids: 312g (Frame seulement)
Largeur: 550mm
Trous Motor Bolt: largeur de 19mm

Obligatoire:
Multi-Rotor tableau de commande
15 ~ 25A brushless ESC x 4
la batterie 3S 1800 ~ 2200mAh
28-XX ~ 1100 1300KV moteur sans balais x 4
8x4 hélice - 2 norme rotation / 2 inverse

Remarque: Tous les HobbyKing X cadres de la série sont achetés directement à l' usine. Nous avons travaillé en étroite collaboration avec les ingénieurs de l'usine pour assurer la qualité. Tous les cadres de la série X sont CNC coupe et broyé avec précision contrairement à beaucoup de cadres à bas prix disponibles sur Ebay ou fournisseurs chinois qui sont percés à la main dans les usines de faible technologie. La série HobbyKing X disposent également d'épaisses plaques principales GF pour stength ajouté.

Fiche Technique

Informations supplémentaires

  • Count lame:
    Non communiqué
  • Diamètre X ( pouces ):
    Non
  • Référence
    9323000036
  • Watt Hour
    0.00
  • Poids (g):
    447.00
  • Longueur:
    280.00
  • Largeur
    60.00
  • Taille
    160.00
Discussions
Commentaires

Écrivez votre propre avis

Seuls les utilisateurs qui se sont identifiés peuvent faire partager leurs remarques. Veillez vous identifier ou vous enregistrer

Excellent job. My order from the East warehouse arrived super quick. All parts were in the box and the frame was as advertised. Easy assembly. Being in the U.S., the postage was very reasonable. Thanks, HK !
Great frame for the money. Fits a KK2 & PDB quite happily. Quality of the plates surprised me, nice clean milling & edges. The aluminium used on the arms is strong yet light, it does deform when you tighten stuff down but I had to seriously torque stuff before they bent. Only disappointments were the arms came scratched quite a bit, the anodizing is very light and doesn't take much to scratch through it. It was missing the 3x25mm bolts, you get what you pay for though.
Really good frame. Had no issues with it. Motors will mount with only 2 bolts. not a lot of room for FPV or camera stuff. Very stable and stiff. Extra width goes along way for stability in a quad, i would say that counts for a lot more than any carbon props will.

Lachko zlozitelny. snad vydrzi
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringg
The Red/Black does help with orientation but only up to about 100 yards; after that there isn't enough contrast to really tell the orientation. There weren't any instructions or assembly diagrams so it took a while to figure out what screws went where. They need to put an assembly diagram under the files tab. I assembled with a Q-Brain 25Ax4 ESC, unfortunately the area between the legs was just a few mm too small to fit the ESC so there wasnt really a good place to put it. Sturdy and handles some pretty hefty crashes well.
I got this frame recently and it is awsome!
It's strong and very light and the folding feature is awsome, just make sure you tighten the legs a bit and do about half a turn back so you can slide it but it wont be wiggly and loose.

Do note the guide doesn't tell you to use the washers a hole lot of times despite there being enough for any screw you'd be using so do add them each time!

The manual also overlooked the fact that the metal spacers should be placed on each leg bit so keep that in mind as well!

The KK board can fit exactly on top instead of the glass fiber piece you get so that is nice as well!

I would like to see the camera attachement to be stocked in europe as well though.
nice build quality

-good cutting

-precision

-extra plastic spacer

-easy to assemble
This frame is quite good value and I am pleased I chose it for my first quad. Like some others, it is a good idea to insert wood blocks in the ends of the arms to prevent them from being crushed by the mounting and motor bolts. The hardware supplied is good and adequate and includes a battery strap. It needs legs mounted on the main frame for landing as after a while or after a heavy landing the arms tend to bend up and have to be straightened periodically.
In this one I use a KK2.1 FC board and SK3 2830 Turnigy Aerodrive motors with 9x4.7 Turnigy props and 30 Amp Turnigy Plush ESCs. I use 2450 and 2650 35C batteries. It also goes OK with 1800 35C batteries.
I cut some rings off a broom handle to insert on the legs as ' landing wheels' just to give it a little more ground clearance.
It is a steady frame and can go like a rocket if you want it to, but is also very docile when required.
To sum up, I am quite happy with this frame.
primer intento de quadcopter
View all reviews
Vidéos
  • HobbyKing X550 Glass Fiber Quadcopter Frame

Upload video
Fichiers

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.