Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing ™ 4-Blade Hélice 7x3.2 Noir (CCW) (1pc)

Generating Links

HobbyKing ™ 4-Blade Hélice 7x3.2 Noir (CCW) (1pc)

Prix:

Now save économisez 0,00 € 0,00 €

1,64 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
OR001-01001
Livraison gratuite? Cliquez ici pour apprendre plus!

4 Lame EP Hélice 7x3.2 / 170x80mm (Paire)
Suits 2-2.3mm arbre.

  • Propeller Diamètre X ( pouces ) 7.00
  • Emplacement Y ( pouces ) 3.20
  • Rotation CCW
attributeset-13
Close

Dimension Diagram Guide

  • attributeset-13

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

helisswiss | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2014

this propellers have not 3.2 pitch more likely 5 or a 6.
My test with 210 W 1400KV motor 3S battery the power input was around 290W .
From the eCalculator it should be 180W. Calculated with 6 pitch the result is 265W.
The Static Thrust was around 450 grams, but it should be 750 grams.

Dangaras | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 21, 2013

These are the few and far between 4-blade props. They are a little more flexible than desired and may unload more than expected in the air.

Very good | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 20, 2008

they are perfect. And the power is really big. My depron flys vertical with not more than 2/3 of power. ( 230g 1000mah 7,4V ). They could be used for twin engines planes. It could be good if you had pair with normal and counter rotation. )

Terence Lynock | Acheteur vérifié

  • Overall
  • Quality
  • Value

4 Blade EP Propeller 170x51/6.

Nov 14, 2007

These things have great promise with a bit of engineering, chop off the front dome of the spinner and bore out the plug to fit a prop adaptor.

Use a two bladed spinner and cut out two extra slots then mount on a CF2805 or bigger and hold on tight! sounds great and loads of bite from those paddle blades.

Have one mounted on a 21'' span Sea Fury I am just finishing and really looking forward to getting it into the air,



regards,

Markus Tanke | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very good Prop

Nov 14, 2007

I bought it for my Transal. Its a very good prop. with good quality. Needs about 13Amps with the "TURNIGY 28-30-azj 14A 1100Kv Brushless Outrunner" and a 2200mAh 3s Lipo.

Phillip Artweger | Acheteur vérifié

  • Overall
  • Quality
  • Value

4 Blade EP Propeller 170x80mm/

Nov 14, 2007

Very nice propellers,



run 2 pairs on with the KV1500 24g outrunners on 2S 800mAh packs for a scale flying boat and a acro flyign boat and get up to 17min flying for the scale ship and 8 for the acro bird with very high performance !



They grey conical adaptor is drilled out to fit the prop shaft and glued to the propshaft, the props are stll press fitted to teh adaptor and it works perfectly even at high power.

Sietse van Doorn van Doorn | Acheteur vérifié

  • Overall
  • Quality
  • Value

4 Blade EP Propeller 170x80mm/

Nov 14, 2007

Very cheap and good props. I have one on a depron spitfire on a homebuilt CD-rom. Just as Terence says, you have to modify it a bit. Original it has some sort of push on system. I also cut of the dome and now it fits a standard propsafer with a rubber band! :D

mauro amadio | Acheteur vérifié

  • Overall
  • Quality
  • Value

prop

Nov 14, 2007

whitc tipe of motor for this prop. ,please i crazy for this 4 blade

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!