Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing ™ Mi Digital High Torque Servo HV / MG 31 kg / 0.15sec / 60g

Generating Links

HobbyKing ™ Mi Digital High Torque Servo HV / MG 31 kg / 0.15sec / 60g

Prix:

Now save économisez 0,00 € 0,00 €

40,74 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
019000001
Livraison gratuite? Cliquez ici pour apprendre plus!

Les servos HK Mi Series représentent la prochaine percée dans la technologie d'asservissement de haute précision. Utilisation de l'induction magnétique plutôt que d'un potentiomètre, ils offrent un niveau inégalé de précision et de performance, enfin HV tensions de fonctionnement signifie que ce servo peut fonctionner directement à partir d'un Lipoly Batterie 2s, ce qui élimine le besoin de dispositifs de réduction de la tension comme UBECs et régulateurs pour la paix d'esprit .

Spécifications:
Voltage: 6.0V / 7.4v
Vitesse: 0.17sec / 60deg (6.0V) - 0.15sec / 60deg (7.4v)
Couple: 27.00kg.cm (6.0V) - 31.00kg.cm (7.4v)
Taille: 40mm x 20mm x 39.2mm
Poids: 60g
Train d' engrenages: Titane-Aluminium Alloy
Moteur: Coreless Motor
Roulement à billes: 3
Lead: 250mm avec Universal / JR plug

Mi: Induction magnétique, utilise un encodeur rotatif magnétique en place d'un potentiomètre traditionnel (inventé en 1877). encodeurs rotatifs magnétiques ont une vie plus longue et souffrent moins d'usure.

  • Servo Couple ( kg ) ( min . 0,01 kg ) 31.00
  • Servo Vitesse ( Sec / 60deg ) 0.15
  • Servo A (mm) 44.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 38.00
  • Servo D (mm) 20.00
  • Servo E ( mm ) 55.00
  • Servo F ( mm) 30.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Scott594 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 02, 2014

Tested, disassembled and inspected these. Great servo, but are more than powerful enough to destroy themselves if ran hard past the stops. I did inadvertantly it. It was over in a fraction of a second. Incredibly the servo continues to work but runs continously. The final titianum gear teeth stripped and it deflected intermediate shaft bushing in the housing - A metal housing would withstand more abuse but at a substantial weight penalty. At this torque level something's gonna break somewhere if you screw up.
That being said, these are absolutely brutal. They will destroy almost anything you can hook to them (In a giant scale aircraft anyways). I am using 3mm steel rod ends and titianum pushrods and it will probably fail that but I'm sure it would simply rip the aileron off the wing 1st. These are fast, precise, center perfectly are and easily the equal of any $200 name brand servo. If you want a great servo and aren't hung up on names, you'll love this servo.

Gavin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2014

bought this , bench tested in car, great turn and speed however stripped out with minutes of first run , complete waste of money and time

Ace Daniel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2013

Ok, I have it. Wowe what a Power, no Chance to stop it with my Hands. And a realy high precition servo with very lowe noise. I also have the smaler one's with 7kg and 11kg torque and hope HK will bring them in the EU-shop. Don't try to test it with a normal analog Servo-Tester. It will only work with a digital Tester ore your digital receiver.

Rkaks | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2013

Bought one for steering in Axial Wraith, and ran it with 6,2 volts since my rear steering servo cant take more. On the table and indoor testing it seemed fine, little noisy, and centering wasn`t 10/10. But when went driving offroad, it took whole 10-15 minutes before first squeek from it. I drove the rest of my comp with it, squeekin got a little worse. Funny thing was you could drive normally with it but when more torque were needed it started to yell.. Didn`t sound like output gear at all.. When opened it was second gear what had jumped teeth. Yup, gear are like butter and engagement is poor, also notised that as too much slop. And that 47XX gear set doesnt solve this problem so now I have a servo in which I cant get replacement parts..
For rc-cars, be warned if you buy this.
For rc-planes, do yourself a favor and dont buy this one.

chrisr | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 13, 2013

I've been using a few of these in different scale trucks and crawlers, and they are crazy strong. I have them all wired directly to the 2s battery. TONs of power, and work very well. Not very loud, center perfectly. I have actually burned out one of the circuit boards by flicking the steering back and forth so fast it Overloaded and fried. My fault, I turned down the steering TX speed, and now they last forever. I also have the 23kg ones, just as good! Great servos!!

Heido | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2013

Purchased one for my crawler. Looks nice, is strong, not too much slop pn the gears.
Unfortunately during the 4th 850mAh battery pack (30 min run all together) the gear stripped. It seems the gear material isn't that good.

UH-Switzerland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 12, 2013

Not the cheapest product, but one of the best servos that I have ever tested. No gearplay, excellent centering, and no shaking on all the flapps, it is an excelent choice for big 3D machines. You can change it with the Hitec premium products without compromise. My endurance test with around 100`000 Cycles under load (50Ncm) attested that the characteristics of this Servo are the same as before.
The price of the incredible Power is the high energy consumption. It can pull up to 4.5 amps at 6 volts! If you use a lot of this servos-types you have the look for a rock solid power supply.

Devil Inc | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 11, 2013

Started out AWESOME, ended not so much. I bought 3 of these, all for rock crawler/trail rigs. All 3 of them ended with a stripped main output gear. Apparently all of the other gears are Titanium and the main output gear is Aluminum (butter). There seems to be a little too much backlash between the output gear and the previous one. These servos are plenty strong, ran one @ 7.0v for a bit, the others were ran @ 6.0v. Honestly, the last gear should've been something other than Aluminum, steel sould've been a much better option in my opinion. Really can't recommend these, sorry.

flyer88 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 27, 2013

Review.

Bought one for testing,

Speed .16 to 60 degrees

Very noisy, MIE always working and buzzing.

MIE very slow around center

Poor centering due to loose gear train, too much backlash.

Good , strong servo, but not for precision aircraft.



the Hobbyking BL-84601 Digital Brushless MG HV Servo 16.10kg non MI , kicks its butt for accuracy but not speed or power.

MacTheRipper | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 07, 2012

I put this servo in my Traxxas Summit 1/10 instead of the double traxxas stock ones, it's as fast as the stock traxxas servos but waay much stronger and that is at the power from the ESC, probably going to get even stronger and faster if used with 7.4 volt.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!