S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire

HobbyKing ™ Mini DLG Pro w / Ailerons Balsa - 990mm Violet (PNF)

HobbyKing ™ Mini DLG Pro w / Ailerons Balsa - 990mm Violet (PNF)

Now save enregistrer 20,17 € 20,17 €

Special Price 82,45 € 82,45 €

You save enregistrer 20,17 € 20,17 €

Was  102,62 €

Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
944 g
SKU:
9419000007-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Le Mini DLG HobbyKing ™ avec Ailerons est un brillant modèle parfait pour ceux qui cherchent à entrer dans les planeurs DLG sans les tracas et les frais de construction d' un kit traditionnel! De petite taille, une excellente qualité de construction et un niveau élevé de pré-assemblage, le tout à un prix qui ne peut pas être battu!

L'aile renforcée de carbone est construit à partir de balsa et recouvert de film ultra-léger, comme le sont les lames horizontales et verticales. Le boom est construit en fibre de carbone tandis que le fuselage pod amovible est réalisé à partir d'une combinaison de couches de lumière et de plastique. Tout cela fait combinés pour un modèle ultra-léger avec d'excellentes performances de vol!

Le Mini DLG arrive avec les sections aile, fuselage et la queue pré-assemblés, ainsi que les servos, tringles et guignols tous les pré-équipés. Après l'ouverture de la boîte, vous aurez simplement besoin de boulonner sur l'aile, le stab horizontal et installer votre propre récepteur / batterie.

Caractéristiques:
• Excellente qualité de construction
• Niveau élevé de pré-assemblage
• balsa et fibre de carbone construction ultra-léger
• Un morceau de boulon sur l'aile et le stabilisateur horizontal
• Servos, tringles et guignols pré-équipé

Spécifications:
Envergure: 990mm
Longueur: 750mm
Wing Zone: 11.16dm²
Voler Poids: 160g (peut ajouter du poids de ballast pour les jours venteuses)
Servo: 3 x 3.6g micro

Obligatoire:
émetteur 2CH minimum et récepteur (récepteur micro recommandé)
4,8 ~ 6V récepteur (moins de 25g recommandé)
UBEC régulateur / tension (si vous utilisez 2S batterie de récepteur LiPoly)

* Remarque: la batterie du récepteur tension de sortie ne doit pas dépasser 6V en cas d' exécution directement au récepteur sans UBEC / VR, sinon des dommages à servos peuvent se produire.

Product
Specifications

Informations supplémentaires

  • Référence:
    9419000007-0
  • Brand:
    HobbyKing
  • Poids (g)
    944.00
  • Longueur
    1050.00
  • Largeur:
    150.00
  • Taille:
    200.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
It's fun to fly on a sunny day and the quality is quite good for the price. I also own the Mini DLG without ailerons and this version doesn't stay in the air as long, but it's much faster and can do more acrobatic turns. The servos aren't quite precise enough, but they're fine if you aren't looking for best performance. As with the regular Mini DLG, I would suggest putting at least some tape around the tail boom just under the wing, because it can easily develop cracks. I fly this with a 180mAh 2S LiPo, 5V regulator and the FrSky V8FR-II. I have to put some more weigh in the nose to get the CG just right.
Quality
Value
Overall
Quality
Value
Overall
Flights perfectly, easy to assemble, perfectly fits 2S 300mah battery with voltage regulator.
Quality
Value
Overall
Quality
Value
Overall
The mini-DLG is an excellently constructed model with absolutely no faults at all and so I cannot therefore agree with the comments about poor construction and weak boom mounting . This model needs to be looked after and not be subjected to heavy landings - it's not made of foam, it's made of balsa, film and hard plastic so it needs to be landed gently, as all DLGs should be . To help slow the model down for landings I have set up the ailerons to droop using the throttle function as suggested in the Daily Video and it action works very well . This model is more compact than my other DLGs and so it is handy for flying in smaller fields, slopes and sea walls . The model arrived this evening and I completed the radio installation and set up in about an hour - I can't wait to get it into the air, but the weather needs to improve first . A very nicely constructed model and one which I am proud to own .
Quality
Value
Overall
Quality
Value
Overall
The boom is very fragile at the pod and wing connection, you can wrap the boom with tape around the wind mount area, between the mountings and just aft of the rear mounting, this helps stop the boom splitting, also you can tape the back of the pod to the boom with foam backed servo tape, just remove the pod securing screws, apply tape to the area of the pod that's closest to the boom, then when you screw the pod back on, make sure the tape sticks to the boom, this will give the boom a bigger connection point with the pod, decreasing the likelihood of stressing the boom on a bad landing and from launching.
Considering the weight, it flies pretty well, I also have the yellow none aileron version
Quality
Value
Overall
Quality
Value
Overall
Sehr gut verarbeitetes Modell, soll mit 1S Lipo 600 mA mit Voltbooster betrieben werden wegen Gewicht, damit der Schwerpunlt passt.
Quality
Value
Overall
Quality
Value
Overall
As as first DLG, I think this is a great model, it's true, the boom where it goes i nto the pod is a bit weak, but, it's more down to the fact the pod is only supported by three screw, which leaves a lot of leverage force bei g transferred during a heavy landing. So before you fly it for the first time, put a bit of servo tape between the pod and the boom under the wing area, it'll save you cracking the boom like i did!

A bit of carbon laminated over the crakwilll fix it, ready for the next flight.
Quality
Value
Overall
Quality
Value
Overall
Great little DLG. Structurally strong and has a nice finish. I've bought spare servos Turnigy 1440, but the stock ones are even better. Right wing had a slight twist up toward the tip, but this was easily fixed with a hot iron. First flight was unstable with the CG at 80mm, but after adding 10gram of lead to the nose, with the CG at 70mm it now flies great! It's also very nice to have the flaperons. I've mixed elevator with flaperons and vice versa so it can fly efficiently at various airspeeds. Great product and definitely a lot of fun. Havent gotten more than 30 second flights in dead air, I can't wait to find some thermals. Would definitely recommend this DLG.
Quality
Value
Overall
Quality
Value
Overall
I received my DLG in good condition wit tight covering. I used a Turnigy battery voltage booster and a 1s Turnigy battery. The servos and linkages were pre-installed so all I had to do was install the receiver and equipment listed above. It took longer to program my transmitter than assemble the plane! My first impressions were positive and the fist flights were predictable with only a little down trim needed. I LOVE THIS PLANE!!I set up the ailerons in three modes, launch 2mm up, even for flight, and 4mm down for landing. I'm still tweaking the settings but this is so simple and fun! This will not be my last DLG.
Quality
Value
Overall
Quality
Value
Overall
I bought this glider as my first dlg, as I was interested in having flaperons rather than the rudder/ elevator control of the other version. I was happy to see that the glider arrived in good packaging with no damage. Although the kit's contents did not match the instructions exactly (the throwing peg has been changed), there was no confusion in the assembly process. I originally used a 2s 300 battery with a BEC and hobbyking's 3 channel receiver, but eventually switched to a 1s 500 to save weight and to make it easier to fit everything in the canopy. The plane feels like it is high quality, and is very light. I started with overhand launches and decided that I needed to reinforce the vertical stab because it is glued to the boom without removal of the covering film. With that securely attached, I tried discus launching and found that it was relatively easy. I get between 30 and 50 feet of height with a conservative throw. I found after some not-so-graceful crashes, however, that the boom tends to crack under the rear wing mount. the plane still flies fine with the cracks, but would probably have a short life span that way, I will be reinforcing that area, and everything else seems to be reasonably durable.
I am happy with the purchase, and although I would have liked to see a stronger boom/ wing mount solution, the glider is good enough quality at a good enough price to learn
Quality
Value
Overall
Quality
Value
Overall
The overall quality of this product is quite good for that price.
The main weak point is that the fuselage rod is VERY weak at the front side. The wall thickness is paper thin so it can not withstand any impact.

So it is after all it is not suited for beginners...
Quality
Value
Overall
View all reviews
Upload
Videos
  • Mini DLG

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.