New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Hobbywing X-Rotor 250 Taille ESC - 10 Ampères (OPTO)

Hobbywing X-Rotor 250 Taille ESC - 10 Ampères (OPTO)

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

8,66 €
Statut:
En stock.
Poids
35 g
SKU:
9020000028-0
WANT FREE SHIPPING? Click here to find out more!

La série Hobbywing X-Rotor ESC sont un régulateur de vitesse de multirotor bonne qualité. Ils ont un large éventail de fonctions de programmation combinés avec une courbe d'accélération linéaire.

Nos contrôleurs de la série X-Hobbywing Rotor viennent avec une garantie de 12 mois. Ces régulateurs de vitesse sont vendus dans les pays occidentaux sous différents noms au triple du prix. Nous sommes certains que vous trouverez ci pour être parmi les meilleurs BESC disponibles à partir de l'Asie.

Programmable par l'utilisateur, à la fois via le contrôleur et la carte de programmation en option. La carte de programmation est un excellent élément que vous épargnant les tracas d'essayer d'utiliser votre émetteur. Il affiche instantanément les paramètres actuels et les paramètres de changement sont aussi simple que quelques clics de bouton.

Spec.
Cont: 10A
Burst: 12A
Mode BEC: Non BEC
Cellules Lipo: 2-4
NiMH: 5-12
Poids: 13g
Taille: 3 2x24x10mm

  • UGS 9020000028-0
  • Brand HobbyWing
  • Capacité ( mAh ) -
  • Poids (g) 35.00
  • Longueur 110.00
  • Largeur 10.00
  • la taille 110.00
  • HobbyWing X-Rotor ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Amazing. Simply Amazing. Bought 6 of them, 4 for a quad, 2 for extras. Very, very high quality build. Took off the heat shrink to direct solder my motor wires and was blown away with the quality of the circuitry. To remove the bullet connectors, I used a pair of wire cutters to cut them short to the PCB, then de-soldered the tabs from the PCB with my soldering iron. The bullets are really soldered well onto the PCB on both sides and it is not easy to get them off, but if you are dedicated and know what you are doing, it will take a few minutes to remove a set of 3. The only complaint I could have is the position of the signal lead. It comes out of the top of the PCB and over the capacitor. I accidentally tightened a zip tie too much and pulled the solder pad right off the PCB. This only happened once, and nothing has failed even through several hard crashes, a couple with the quad splitting into two. This can easily be avoided with a drop of hot glue on the wire/pad before the capacitor. Once you heatshrink the whole thing, it will be stuck in there with no chance of pulling out. The throttle response is instant and they came fully calibrated out of the box. Very, very happy with these ESCs and will be ordering more soon!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing. Simply Amazing. Bought 6 of them, 4 for a quad, 2 for extras. Very, very high quality build. Took off the heat shrink to direct solder my motor wires and was blown away with the quality of the circuitry. To remove the bullet connectors, I used a pair of wire cutters to cut them short to the PCB, then de-soldered the tabs from the PCB with my soldering iron. The bullets are really soldered well onto the PCB on both sides and it is not easy to get them off, but if you are dedicated and know what you are doing, it will take a few minutes to remove a set of 3. The only complaint I could have is the position of the signal lead. It comes out of the top of the PCB and over the capacitor. I accidentally tightened a zip tie too much and pulled the solder pad right off the PCB. This only happened once, and nothing has failed even through several hard crashes, a couple with the quad splitting into two. This can easily be avoided with a drop of hot glue on the wire/pad before the capacitor. Once you heatshrink the whole thing, it will be stuck in there with no chance of pulling out. The throttle response is instant and they came fully calibrated out of the box. Very, very happy with these ESCs and will be ordering more soon!

Using with 1704 2300KV Multistar motors. Everything works good, also responsibility is okay for KK flight controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using with 1704 2300KV Multistar motors. Everything works good, also responsibility is okay for KK flight controller.

Easy to install, just solder the two supply cables onto your dist board. Then the bullet connectors make easy work of connecting to the motor, and even easier to switch around when your motor spins the wrong way!
Used a KK mini to calibrate rather than a separate programmer

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to install, just solder the two supply cables onto your dist board. Then the bullet connectors make easy work of connecting to the motor, and even easier to switch around when your motor spins the wrong way!
Used a KK mini to calibrate rather than a separate programmer

very good esc for multirotors, they come precalibrated for the same rate

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good esc for multirotors, they come precalibrated for the same rate

Great performers, great bargain. Only slightly less responsive than my kiss escs but unfortunately can't handle 4S

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great performers, great bargain. Only slightly less responsive than my kiss escs but unfortunately can't handle 4S

Great value for money. Special 2mm bullet connectors are soldered directly to the ESC - but are easy to de-solder. Solder pads are easily accessible and rewiring the ESC is a breeze.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great value for money. Special 2mm bullet connectors are soldered directly to the ESC - but are easy to de-solder. Solder pads are easily accessible and rewiring the ESC is a breeze.

Very nice esc's small and fits my 250 fpv racer perfect, they are super responsive and do not come close to getting hot, I use the Emax PM1806-2300Kv motor on my little quad and it is like a streak of lightning when I do a full on punch out, an the esc motor combo is superb,they are out of motors right now but still have some of the esc,s still in stock so Im gonna order some more for future builds,and btw this multirotor thing is very addictive!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice esc's small and fits my 250 fpv racer perfect, they are super responsive and do not come close to getting hot, I use the Emax PM1806-2300Kv motor on my little quad and it is like a streak of lightning when I do a full on punch out, an the esc motor combo is superb,they are out of motors right now but still have some of the esc,s still in stock so Im gonna order some more for future builds,and btw this multirotor thing is very addictive!

Kind a nice and clean little package, does not run as smooth as the Afro ESC Slim20A with 2300kV Motors. Throttle Range a bit more limited than SimonK ESC's.
Still very direct & fast throttle response

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kind a nice and clean little package, does not run as smooth as the Afro ESC Slim20A with 2300kV Motors. Throttle Range a bit more limited than SimonK ESC's.
Still very direct & fast throttle response

Customer files
X-Motor Datasheet Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save