Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Hobbywing X-Rotor ESC - 20 Ampères

Generating Links

Hobbywing X-Rotor ESC - 20 Ampères

Prix:

Now save économisez 0,00 € 0,00 €

12,74 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9020000029-0
Livraison gratuite? Cliquez ici pour apprendre plus!

La série Hobbywing X-Rotor ESC sont un régulateur de vitesse de multirotor bonne qualité. Ils ont un large éventail de fonctions de programmation combinés avec une courbe d'accélération linéaire.

Nos contrôleurs de la série X-Hobbywing Rotor viennent avec une garantie de 12 mois. Ces régulateurs de vitesse sont vendus dans les pays occidentaux sous différents noms au triple du prix. Nous sommes certains que vous trouverez ci pour être parmi les meilleurs BESC disponibles à partir de l'Asie.

Programmable par l'utilisateur, à la fois via le contrôleur et la carte de programmation en option. La carte de programmation est un excellent élément que vous épargnant les tracas d'essayer d'utiliser votre émetteur. Il affiche instantanément les paramètres actuels et les paramètres de changement sont aussi simple que quelques clics de bouton.

Spec.
Cont: 20A
Burst: 25A
Mode BEC: Non BEC
Cellules Lipo: 2-4
NiMH: 5-12
Poids: 13g
Taille: 32x24x10mm

  • HobbyWing X-Rotor ESC
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Minas | Acheteur vérifié

  • Overall
  • Quality
  • Value

ESC

Nov 27, 2016

Do any one now program cart for that Esc Xrotor series...!!!!!!!!!!!!!!!

Minas | Acheteur vérifié

  • Overall
  • Quality
  • Value

program cart

Nov 27, 2016

Do any one now programing cart for that series Esc Xrotor

Ole | Acheteur vérifié

  • Overall
  • Quality
  • Value

Hobbywing+blhelli=awesome

Nov 12, 2016

I have mine flashed with blhelli firmware and light damped activated, and with emax 2206 motors my quad have newer been flying better!

2walla | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Good solid performance.. would be nice if preflashed with BLHeli. I do get a bit of video noise from these on my race quad.. more than I get from some dys 20 amp controls with capacitors. Good smooth power output and nice throttle response with stock out of box setup.

qasim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2015

Bought to use with ZMR250. much more awesome when flash with BlHeli into this esc. so many method in youtube how to flash it with arduino nano.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 31, 2015

??? ????? ????~~??????? ????????~~~

Tobias | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2015

I bought one to test with my Multistar 4220-650Kv but it loses sync over 80pcnt throttle on 4s and 11x4.7 prop

Mark | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2015

I wanted to see how these did on my new build. I used these along with the Multistar Elite 2204-2300KV. as it turned out, this is the smoothest, most responsive model I have built. I have been flying them for over six months now and have not had one hiccup. These are now my preferred ESC's and will be using them on all of my builds!

Felix | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2015

Very good ESC. Works fine with my NAZA (throttle calibration min 1000s - max 2000s), very smooth with stock settings on 1000kV motors. I've seen a lot of ESCs from inside and a lot of strange soldering... I was surprised this ESC is soldered so well and has a nice layout. The FETs have good thermal contact to the aluminumplate. The wires are AWG18, the exact weight is 14,6g.
One thing is suboptimal: Because of the capacitor on the input you cannot fix the ESC flat to a frame. Just heat the shrinkingtube and bend the cap carefully away.

jc1989 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 16, 2015

Using them on a f330 quad on 3s with 1000kv motors with 8x4.5 props and they don't even heat at at all. Over all build quality is very good to. will be using the 40a versions in the future on a larger quad or hex.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!