New Items Actus Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HXT 2730 kit DIY

HXT 2730 kit DIY

Discontinued Product

Please continue searching for a similar product.
SKU:
HXM2730-DIY
WANT FREE SHIPPING? Click here to find out more!

C'est ici!
Le kit de bricolage du moteur populaire 2730.
Vent pour Kvs de 900 à 6000rpm / v
Fil Jauge: .44mm
Poids du moteur ne peut pas être déterminée comme il est livré avec câble supplémentaire, film rétractable etc.

11 Active Y config 8 aimants pour 1700kv
14 Active Y config 8 aimants pour 1300kv

Expérience avec des virages et des aimants pour faire votre propre moteur de performance.
Obtenir le fil serré et plus propre que toute usine aurait soin à offrir, vous permettra de serrer la puissance maximale de ce moteur déjà magnifique!

Excellent pour les petits foamies en particulier les avions pico GWS.

Le moteur TowerPro monture représentée ici peut être utilisé pour ce moteur;
https://www.hobbyking.com/hobbyking/store/comersus_viewItem.asp?idProduct=3613

  • UGS HXM2730-DIY
  • Brand -
  • Capacité ( mAh ) -
  • Poids 45.0000
  • Longueur 148.00
  • Packaging Width 10.00
  • la taille 16.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Super stuff to DIY and understand motor basics, doesn't come with any manual, however they are available in the files tab, so go right ahead and do some exprement

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super stuff to DIY and understand motor basics, doesn't come with any manual, however they are available in the files tab, so go right ahead and do some exprement

Very noce and cheap - good for "learning brushless motors".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very noce and cheap - good for "learning brushless motors".

motors came in good time,they were complete and the build went good. dont really have any serious complaints and would buy again. used all 16 mags 13T wye 1209KV 11.27 V it doesnt like small props rather anything from 8-10 but watch the heat. the motor ran very smooth, looks like another version of the blue wonder

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motors came in good time,they were complete and the build went good. dont really have any serious complaints and would buy again. used all 16 mags 13T wye 1209KV 11.27 V it doesnt like small props rather anything from 8-10 but watch the heat. the motor ran very smooth, looks like another version of the blue wonder

j'ai acheter 2 kit moteur ordre:2001813847 code1h25393858 que j'ai recu pas de support moteur, pas de repere aiment, et surtout pas de notice de cablage donc impossible de faire ce kit dommage

bonne fete a tous

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

j'ai acheter 2 kit moteur ordre:2001813847 code1h25393858 que j'ai recu pas de support moteur, pas de repere aiment, et surtout pas de notice de cablage donc impossible de faire ce kit dommage

bonne fete a tous

Great little kit to learn the "ins and outs" of a brushless motor. Fit and finish were very good on my kit and all parts could be pressed together by hand with the help of a flat (soft) wooden surface.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little kit to learn the "ins and outs" of a brushless motor. Fit and finish were very good on my kit and all parts could be pressed together by hand with the help of a flat (soft) wooden surface.

Very nice set, especially since the 1500kV is sold out. I use them in my Epp Shockfliers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice set, especially since the 1500kV is sold out. I use them in my Epp Shockfliers.

Three minor bad things first, the sticky board it comes on is horrible. should be in a small box or something. second, The can is hard to press together. Third, no instructions. After that, what fun!! I wound 8T delta.

Tested using 3s 25C hyperion lipo and CC t-bird 9

22,300 rpm @ 11.88V 4.40A APC 4.2x2

18,800 rpm @ 11.70V 9.66A APC 4.7x4.25

Used on my Fun Foam F-15 profile pusher. Flies 55~60mph. Comes down cool! esc is only warm!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Three minor bad things first, the sticky board it comes on is horrible. should be in a small box or something. second, The can is hard to press together. Third, no instructions. After that, what fun!! I wound 8T delta.

Tested using 3s 25C hyperion lipo and CC t-bird 9

22,300 rpm @ 11.88V 4.40A APC 4.2x2

18,800 rpm @ 11.70V 9.66A APC 4.7x4.25

Used on my Fun Foam F-15 profile pusher. Flies 55~60mph. Comes down cool! esc is only warm!

Good and cheap Motorparts.

Very good quality and easy to build.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good and cheap Motorparts.

Very good quality and easy to build.

This is a good site for winding information of brushless motors.

http://www.bavaria-direct.co.za/models/motor_info.htm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good site for winding information of brushless motors.

http://www.bavaria-direct.co.za/models/motor_info.htm

look fun and interesting to diy a motor on my own.



so brought one to try. qualtiy and packaging look good.



will update when i gt it done and working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

look fun and interesting to diy a motor on my own.



so brought one to try. qualtiy and packaging look good.



will update when i gt it done and working.

  1. 1
  2. 2
  3. 3
Customer files
ABCABCABCABC for 8 or 16 magnets/magnusE Download [105]
dLRK for 10 or 14 magnets/magnusEl Download [103]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking