S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

HXT 2835 (380S) 2700kv Brushless Inrunner

HXT 2835 (380S) 2700kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
150 g
SKU:
HXT2835-2700
Description
du

Taille du moteur: 2835 (380S)
Vitesse: 2700kv
ESC requis: 25A
Gamme de tension: 6 ~ 12v
Aucun Curr de charge: 1.2A
Max charge: 35A

Diamètre: 28.2mm
Longueur: 37mm
Avant montage Trou Distance: 19mm
Montage avant Taille du filetage: M3
Diamètre de l' arbre: 3.2mm
Longueur de l' arbre: 12mm
Poids: 102grams

Product
Specifications

Informations supplémentaires

  • Référence:
    HXT2835-2700
  • Brand:
    Non communiqué
  • Poids (g)
    150.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    2700.00
  • Unit Weight (g)
    102
  • Max Currents (A):
    0.00
  • Résistance ( mh ):
    0.00
  • Max Tension (V)
    12.00
  • (W )
    0.00
  • Arbre A ( mm ):
    3.00
  • Longueur B ( mm ):
    37.00
  • Diamètre C ( mm )
    28.00
  • Longueur Can D ( mm )
    36.00
  • Longueur totale E ( mm ):
    48.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Der ideale Antrieb fr den Multiplex Funjet mit ner 5,5 x 4,5 Schraube eine sehr gute Mischung aus Power ( 130km/h Topspeed geloggt) und Flugzeit ( bei Vollgas 5-7min mit 3s Turnigy 2200mah und bei Halbgas auch 10-15min machbar)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super motor.
wollte ihn im Funjet einbauen. hat auch funktioniert.
nur zu wenig Power.
der Originale motor von Multiplex hat mehr drehmoment.
aber er ist ja auch Lnger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor. Runs smooth, delivers stunning performance. Pulls 27A with 5x5 prop on 3S/1300 battery.

My small speed plane (650 gr) plane flies well over 150 kmh with this motor and even accellerates in unlimited vertical climbs. The motor warms up to between 50 and 60 C after a 4 min flight, which is acceptable, but requires a few minutes of cooling down. So does the pilot.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have this motor in my little mini cat 20'' .With a water jacket,and a 35 Turnigy marine speedcontrole,and a Turnigy1.5 3s/3cell 11.1v bat all from Hobby King .With three runs at the lake everything is going fine.The motor was getting hot but with a waterjacket temps are down,and its running good.

Thanks HobbyKing
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Makes a great motor upgrade for a Multiplex Easy Star. I have built 6 and they all perform very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You get what you pay for. I installed this motor in a Zagi XS and it only lasted 8 flights. Had great power and speed while it lasted.



Here's the set up:Zagi XS 48"w.s.

Turnigy 2858/2700 Kv In-runner

Hobby King 40amp ESC

Turnigy 2200mAh 3 cell 20C

Master Airscrew 5.5x4 Electric Prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've used this motor for a brushless conversion of a small electric boat (Aquacraft Reefracer2) with a Turnigy Marine 35A controller and 3-cell A123. Very happy with the quality of manufacturing and the power. Way more than the hull was design to handle!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Install it in my FunJET, with 5x5 prop, drawing around 24A static. Average speed of about 125km/h using WAVEosSCOPE. Motor and pack warm after 3 min all out run. FUN!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this in MPX EasyStar instead of stock 400 brushed motor. With 5.5 x 4.5 prop it takes about 22 amps from 3S lipo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cooked one of these in two minutes using a 7 X 4 pusher prop on an Aeroworks Bede 5B. Three cells, 40 Amp ESC. I have another on the business end of a 400 gram Projeti wing with a 5 X 5 pusher on it, same battery, same ESC, a blue HK. The Projeti was clocked at 114mph a few weeks ago, and today at 102. The amps on the 7 x 4 were 32 and with the 5 x 5 it read 28, not much difference. One cooked, one didn't. I love the motor, and take responsibility for frying it. Use a smaller prop! I have a 2200 coming and another 2700 for the Bede. The ones with the heat sink. Hope they fit. Five stars
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.