Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

HXT 9320MG-180 20,2 g / 3,8 kg / .15sec 180degree

Generating Links

HXT 9320MG-180 20,2 g / 3,8 kg / .15sec 180degree

Prix:

Now save économisez 0,00 € 0,00 €

14,50 €
Expédié de:
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9320MG-180-RTG
Livraison gratuite? Cliquez ici pour apprendre plus!

180 degrés Servo.

Le nouveau servos HXT seulement besoin d'une petite tension (4.8v) pour atteindre des charges élevées de couple!

Point n °: SSV-9320MG-180
Poids: 20.2grams / 0,72 oz
Dimensions: 26 x 13 x 26 mm / 1,15 x 0,50 x 1,05 pouce
Couple: A 4.8V: 3,8 kg / cm, 52 onces /
Vitesse: A 4.8V: 0.15sec / 60 deg sans charge
Exécution: 360mA
Stall actuel: 920mA
Corne Spline: 25 Segments
Fil de connecteur Longueur: 160mm (6.29in)
Connecteur Horsing: connecteur Futaba
Roulement à billes: Un roulement à billes sur le dessus
Types Réducteurs: Metal Gear

Ce servomoteur est la même que la spécification 9320MG, mais il est 180degree tourne.
IL EST PAS UN SERVO PROPORTIONNELLE. ELLE TOURNER 180 DEGRÉS SEULEMENT. SEULEMENT POUR ÊTRE UTILISÉ POUR DES APPLICATIONS ON / OFF WHERE TRAVEL complet est requis.

  • Servo Couple ( kg ) ( min . 0,01 kg ) 3.40
  • Servo Vitesse ( Sec / 60deg ) 0.15
  • Servo A (mm) 32.00
  • Servo B ( mm ) 30.00
  • Servo C ( mm ) 27.00
  • Servo D (mm) 13.00
  • Servo E ( mm ) 39.00
  • Servo F ( mm) 17.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Lucas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2011

We purchased in total 6 of these servos. They only travel between two positions, as already mentioned in the comments here. Unfortunately, they are not travelling exactly 180. Some of them travel 190 200 230 and 265. You're lucky to get one that travels exactly 180 )

chucky1978 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 07, 2011

2/2 work perfect.

21,5cm lenght of Cable with Connector

14,5 gr. w/o Servohorns.

Fabiomel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 01, 2010

Very good, is it small and very strong. I make de video about this retract servo. Please, watch de video at the videos tab.

Fabiomel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 03, 2010

um servo retrtil sem posies intermedirias, ele vai direto de um extremo ao outro.

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 07, 2010

same... ITS A RETRACT SERVO! but theres normal servo on picture- the servo I have received is SSV-9320MG+RTG, simply 9320MG is usual servo, but all has to be explained just by "180". At real, throw is 185degree as to manual.

after testing one of 2 servos has about only 130degree throw.

Fernando Costa | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2009

These servos are quite strong but the quality control is a little poor. I've bought two servos and one of them doesn't make 180 and it's noisier than the other, so it's only a question of luck.

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 03, 2009

Leicht und stark. Die angegebenen 180 Grad Drehwinkel werden allerdings nicht ganz erreicht, nur etwa 170 Grad.

allenl ln | Acheteur vérifié

  • Overall
  • Quality
  • Value

this servo is for retract gear

Nov 25, 2008

I saw people confuse this servo application, this servo is for retract gear use, as I instead in my 46 class F3A, that is much lighter, good recommend.

Ken Taylor | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 05, 2008

Why do you guys keep posting that this servo won't center? IT IS A RETRACT SERVO! It does not work for anything other than retractable landing gear or for on/off applications, there is no in-between. It is not going to center, its going to go from one full end of travel to the other. I have 3 and they work just fine, they pull the landing gear up & down on my plane!

alenl ln | Acheteur vérifié

  • Overall
  • Quality
  • Value

wow, Micro Retract gear servo!

Oct 06, 2008

this is my first time bought such as micro retract gear servo for my park leading, lighter and torque is enought for my airplane, good idea, especially price is much much cheaper than Futaba and other big brand......

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!