Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Système Jiyi P2 Multirotor Autopilot Vol de commande (V2)

Generating Links

Système Jiyi P2 Multirotor Autopilot Vol de commande (V2)

Prix:

Now save économisez 0,00 € 0,00 €

132,87 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
605000002-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Vous cherchez un système de pilote automatique bon marché avec toutes les fonctionnalités d'un grand système de marque professionnelle? Le système pilote P2 Auto Jiyi sera definatly adapter à la loi!

Le système pilote P2 Auto est emballé avec les dispositifs et les modes de vol qui transformeront votre multirotor et vous fournira une expérience de vol professionnel avec toutes les caractéristiques de sécurité et modes de fonctionnement des grands systèmes de marché de vol.

Le système de P2 est adapté pour multirotors avec un diamètre maximum de 800mm et convient la plupart des configurations de multirotor couramment utilisés, y compris, X Type de quads et hexcopter.

Le système offre une meilleure stabilité et endroit précis planant qui le rend idéal pour votre photographie aérienne et la vidéographie. Avec plusieurs modes de vol du système P2 couvre une multitude de styles de vol de novice à la photographe aérien en herbe et dépliant du sport de pointe.

Le système P2 offre une connectivité USB et est compatible avec Windows XP, SP3 et Windows 7, ce qui vous permettra de configurer et d'affiner votre multirotor. La version V2 a révisé firmware pour améliorer la performance globale.

Caractéristiques:
• Prise en charge des PPM, PWM et Récepteurs SBUS
• Fournit une stabilité supérieure et précise tache planant
• Prise en charge des avions de type multirotor avec un diamètre de rotor jusqu'à 800mm
• Conçu pour de type X et hexcopter
• Prise en charge PWM ESC ci-dessous 490Hz
• Les systèmes de radio Suits PCM ou 2.4Ghz
• Compatible avec Windows XP, SP3, Windows 7
• Modes de vol: GPS, mode sans, mode de direction intelligente, Hover et revenir à la maison.
• Protection de basse tension
• Connectivité Micro USB

Spécifications:
Tension de fonctionnement: contrôleur principal 4.8V ~ 5.5V
LED / Power Module: 7.4v d'entrée ~ 6V (recommander 2S ~ 6S LiPo) Sortie 2A @ 5V
Consommation électrique: <2W
Température de fonctionnement: 0C - 60c
Température de stockage: -40C + 60c
Tolérance Planant: niveau horizontal ± 2m, niveau vertical ± 0.8m
Maximum Tilting Angle: 30 °
Vitesse maximale verticale: 6m / s

Composant Poids:
Principal Controller: 32g
GPS / Compass Module: 32g
LED / Power Module: 20g
Principal Controller: 48 × 38 × 17mm
GPS / Module Boussole: 54 × 15mm
LED / Power Module: 30 × 28 × 10mm

Le paquet contient:
contrôleur principal
GPS Module Boussole
Module de puissance LED
Câbles de démarrage
Agencements et installations
Cable USB

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Agostino | Acheteur vérifié

  • Overall
  • Quality
  • Value

Deluso

Nov 18, 2019

mi dispiace ma io con questo articolo non sono riuscito a programmare nonostante tutti gli sforzi e quindi è per me inutilizzabile, ho buttato moneta al vento

robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Turned out good in the end !

Jul 19, 2019

After some months in the box because i couldnt get it working/ arming (see below), i tried again with a race star 4 in 1 esc. I updated the firmware and hey presto it works. It wont arm in GPS mode unless it has locked on to enough satelites but will arm in stable mode anytime. Perhaps JIYI have been tinkering with the firmware, for the better i might add !

Klaus | Acheteur vérifié

  • Overall
  • Quality
  • Value

Sehr gute Steuerung Jiyi P2

Oct 08, 2018

Bin sehr zufrieden mit der Steuerung. Macht genau das,was Sie soll.
Auch ohne GPS-Mode sehr stabil. Für den Preis unschlagbar.

robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Difficult

Apr 01, 2018

I spent hours and hours on this FC and I have finally given up. Life is just too short !. I fitted Afro's first. I could get these to arm but there was a dead zone between 10-20% on the throttle. No amount of different firmware or calibrations would get rid of it. Then I tried Hobbyking blue series ESC's. Known to have worked for other people. No matter what I did, I couldn't get these to arm. Then I tried a qbrain. These would work on anything wouldn't they ? They armed but I couldn't get the throttle range to work consistently. So I changed the Radio and receiver and tried all the above combinations again. Finally back to the afros and SBUS on the receiver, mildly better on the throttle dead zone. So I thought I would at least try a test flight. When I did attempt a flight the led went out and stayed out as soon as the ESC's were armed, then returned when disarmed. I have been a UK CAA qualified UAV pilot for 3 years, and building configuring multicopters for many more years before that..... and my senses tell me that unless all looks and feels correct, don't fly. So I didn't !. In conclusion I would say that this is a firmware problem (which I did update). I believe the basic hardware is of good quality but there is a definite problem with the firmware in so much as there are huge incompatibility issues. Nice try JIYI, but by the look of the reduced support for the P2, its about to be discontinued.

morville | Acheteur vérifié

  • Overall
  • Quality
  • Value

nice flight controller

Nov 04, 2017

I am happy with this F.C. works well on my v700 quad gps hold is solid and all modes work well it is a nice and easy F.C. to setup and the software is easy to use the manual is well written and easy to understand and I got it on sale for 70$ which was a great deal for this well made F.C. Buy it worth every penny

laroche | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good FC (hard to combine with ESC's, most of them wont work)

Oct 07, 2017

An excellent flight controller when you know what to combine with. Not compatible with many esc's. Works very smoothly with the HobbyKing BlueSeries brushless speed controller. I bought a lot of these FC's, and had a problem with 2-3 of them (mostly with the channel 3). When everything is done properly, it is very stable and safe to fly. I have tested RTH compared to Naza, and is even more precise.

andreas13 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2016

dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .....

andreas13 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2016

dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .

Wong | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2016

Bought 4 units and 2x have problem, Jiyi got QC issue. HK want me to sent back to warehouse will cost me more then 50pcnt of the unit cost since i bought it at offer prices. So i choose to bin it. that bad luck for me and no more taking risk with Jiyi.....

kuson | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2016

Great flight controller, especially for simple stabilize mode and hovers / gps. Can do sport mode (I understand it might be acro). Great aluminum box. Software not as good as DJI and can be refined abit more, but for the price is great and performance great do compare with Jiyi P2 Pro, that one offers better hover and can connect to GCS (Android). Like my P2 Pro review, you may have to manually callibrate the ESCs as there is no step in the software to do this, but is just basic plug the ESC servo leads directly to the Receiver and calibrate using throttle stick.

  1. 1
  2. 2
Fichiers clients
P2(en)ManualV1.11.pdf Download [1061]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!