New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Jumper 218 Pro Quad Copter (ARF)

Jumper 218 Pro Quad Copter (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
650000001-0
WANT FREE SHIPPING? Click here to find out more!

Jumper 218 Pro Quad Copter (ARF)

Le Jumper 218 Pro Quadrirotor est conçu avec les amateurs à l'esprit. Ce quad a un empattement de 218mm Le cadre est léger, mais très forte, ce qui permet pour la haute performance. Rendre idée pour le vol FPV ou 3D performants. Son installation simple, vous devient rapidement opérationnel et le vol.

contrôleur de vol Naze32 avec OSD donne une réponse rapide et fiable. Le cadre inférieur a des lignes électriques, interface émetteur AV, interface d'appareil photo et de l'interface de puissance intégré, ainsi que la carte d'alimentation intégrée (avec connecteur XT60). Les bras ont une ligne d'alimentation intergraded pour les CES pour arrêter le câblage désordonné. Pour FPV le kit est livré avec un appareil photo 600 TVL, avec support réglable et transmetteur AV 5.8mHz 200mW. Le groupe motopropulseur incudes 1806-2280KV moteurs avec BlHeli 20AESCs et 5040 hélices pour vous donner une excellente performance. Construit en LED sur les bras vous montrer le chemin à parcourir.

Ce quad est une grande valeur pour l'argent et vous donnera des heures de divertissement et de plaisir.

Caractéristiques:
• De puissants moteurs 1806-2280KV
• BlHeli 20A ESC, une réponse rapide, accélérateur lisse
• 5040 Hélices (CW et CCW)
• carte de distribution de puissance intergraded et de l'électronique de commande de vol (avec connecteur XT60)
• Naze32 système de contrôle de vol avec OSD, 32bit ARM micro processeur pour la vitesse rapide et une réponse rapide
• Contrôleur de vol Cleanflight et Baseflight pris en charge
• Livré avec lumières LED pour indiquer l'orientation d'un multirotor
• Construction solide (1.8mm plaques de cadre avec la construction multicouche, 3.2mm pour les bras)

Spécifications:
Empattement: 218mm
Contrôleur de vol: Naze32 avec OSD (baseflight, cleanflight)
ESC: BLHELI 20A
Brushless Motor: 1806-2280KV
Hélices: 5040 (2xCW et 2xCCW)
Transmetteur AV (TX): 5.8g / 200mW
Appareil photo: CMOS 600 TVL, angle visuel de 120 degrés
Power Adapter: XT60
Dimensions: 216x190x44mm
Poids: 328G (avec caméra et AV transmetteur sans récepteur et batterie)

Compris:
1 x Jumper 218 Pro
1 x Manuel

Obligatoire:
batterie 1500-1600mAh 3S LiPoly
5-6 canal TX / RX
FPV Googles / écran

NOTE: Il est connu pour être cloanes bon marché du Jumper 218 sur le marché. Les contrefaçons peuvent être identifiés par le lac du fil de trace rouge (photo ci-dessus). Les contrefaçons peuvent perdre signal vidéo lorsqu'il est administré gaz en raison de ce problème. HobbyKing ne vend que le dernier Jumper 218 Pro Stock Véritable.

  • UGS 650000001-0
  • Brand Jumper
  • Capacité ( mAh ) -
  • Poids 948.0000
  • Longueur 260.00
  • Packaging Width 80.00
  • la taille 250.00
  • Jumper 218 Pro Racing Quad
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

like this little machine...runs ok. But I was - again - sick and tired with manual provided. Hobbyking really needs to get into business of INFORMING/GUIDING new quad customers decently in manuals. I have written this before with other products from hobbyking, but still we buy stuff that we by ourselves have to figure out. And with "Little technical" knowledge we really needs help...via small video etc. that explain all basic concerning installing etc., right from start with connecting what colour wire where and so on. It cannot be true that every time I buy something from HK I have to juggle around the internet for hours to find solutions for my new investments...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

like this little machine...runs ok. But I was - again - sick and tired with manual provided. Hobbyking really needs to get into business of INFORMING/GUIDING new quad customers decently in manuals. I have written this before with other products from hobbyking, but still we buy stuff that we by ourselves have to figure out. And with "Little technical" knowledge we really needs help...via small video etc. that explain all basic concerning installing etc., right from start with connecting what colour wire where and so on. It cannot be true that every time I buy something from HK I have to juggle around the internet for hours to find solutions for my new investments...

Pros:
-robust and sturdy frame
-nicely made, good materials used
-very stable flight after some tuning
-flight time 8 min with 1500 mAh (no 3D, smooth flight)
Minor issues:
-screws were getting loose and doped in flight. One must glue or fasten them.
-reconfiguration with computer requires jumpers switching each time (otherwise OSD stays off)
-motor power cables soldering was weak, they detached after hard landing
-there is no room for FPV transmitter inside frame. Installed below fuselage exposes it to damage
-lack of spare parts (I may be wrong, but I could not find them so far)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pros:
-robust and sturdy frame
-nicely made, good materials used
-very stable flight after some tuning
-flight time 8 min with 1500 mAh (no 3D, smooth flight)
Minor issues:
-screws were getting loose and doped in flight. One must glue or fasten them.
-reconfiguration with computer requires jumpers switching each time (otherwise OSD stays off)
-motor power cables soldering was weak, they detached after hard landing
-there is no room for FPV transmitter inside frame. Installed below fuselage exposes it to damage
-lack of spare parts (I may be wrong, but I could not find them so far)

Ok after lots of curisng and cussing heres my review. The FC isnt naze32 its a knock off which in turn is a knock off of Naza BUT it works the same its easy to configure. I had some issues i couldnt get power to my reciever or video this caused so much hassle and hair pulling eventually i stripped it all down and found the problem the 5v pin for video and reciever were bent over and squashed on the naze board ports. The other issue is it wont ARM unless i assign a switch which then causes me problems changing modes. So im currently flying in ACRO mode all time i will sort it eventually but its no biggy. Also locktite everything you can even the prop hubs ive lost two already and 2 of the screws came out during flight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok after lots of curisng and cussing heres my review. The FC isnt naze32 its a knock off which in turn is a knock off of Naza BUT it works the same its easy to configure. I had some issues i couldnt get power to my reciever or video this caused so much hassle and hair pulling eventually i stripped it all down and found the problem the 5v pin for video and reciever were bent over and squashed on the naze board ports. The other issue is it wont ARM unless i assign a switch which then causes me problems changing modes. So im currently flying in ACRO mode all time i will sort it eventually but its no biggy. Also locktite everything you can even the prop hubs ive lost two already and 2 of the screws came out during flight.

This quad flies like a dream , so easy to fly The board is great with the built in osd .
Some concerns about the way its designed , too much integration for my taste and the esc should be in th arms not hogging all the real estate on the main body .. there is no where to place a receiver neatly in the frame .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This quad flies like a dream , so easy to fly The board is great with the built in osd .
Some concerns about the way its designed , too much integration for my taste and the esc should be in th arms not hogging all the real estate on the main body .. there is no where to place a receiver neatly in the frame .

the manual is usless and dosent explain enough about the switches , and the supplied vtx lasted 3 mins before it died ..the whole quad smacks of proprietry style build and is too intergrated for my liking ..the only real plus is the control board with the built in osd , and the ability to change pids in the osd menu .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the manual is usless and dosent explain enough about the switches , and the supplied vtx lasted 3 mins before it died ..the whole quad smacks of proprietry style build and is too intergrated for my liking ..the only real plus is the control board with the built in osd , and the ability to change pids in the osd menu .

Nettes Gert. Die Schrauben sollten alle mit Loctite gesichert werden. Bei der Gelegenheit kann man gleich die zwei Platinen der Arme mit Epoxy verkleben. Dadurch wird alles viel stabiler. Im FC muss man oneshot=on und looptime=2500 einstellen, sonst vibriert es. Der Video-Sender wird extrem hei. Das geht nicht lange gut. Entweder 4 Siliziumdioden oder einen Spannungsregler fr 7V davor (nach TE383 suchen) (Stromaufnahme ist ca. 300mA). Kamera ist nicht toll. Aber fr den ersten Versuch ausreichend. Flugleistung ist berzeugend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nettes Gert. Die Schrauben sollten alle mit Loctite gesichert werden. Bei der Gelegenheit kann man gleich die zwei Platinen der Arme mit Epoxy verkleben. Dadurch wird alles viel stabiler. Im FC muss man oneshot=on und looptime=2500 einstellen, sonst vibriert es. Der Video-Sender wird extrem hei. Das geht nicht lange gut. Entweder 4 Siliziumdioden oder einen Spannungsregler fr 7V davor (nach TE383 suchen) (Stromaufnahme ist ca. 300mA). Kamera ist nicht toll. Aber fr den ersten Versuch ausreichend. Flugleistung ist berzeugend.

Although this is supposed to be a ready-to-fly product the quality control completely screwed that up.
None of bolts were fixed with locktite, which meant a motor got lose and tore off from the solder point the first minute of flight. Even though the motors and frame have 4 mounting holes, only 2 were used per motor. Pretty much all the bolts in the front half were lost as well.

I would not recommend this to a beginner and a pro would not bother of course, the performance of this quad is below standard and replacing arms, etc requires complete disassemble.

The integrated voltage regulator on the power distribution board is low-quality and the PCB traces are to thin to handle the current. So it got fried almost instantly.

So now I'm stuck having to order the replacement parts from the international store since the EU does not stock those.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Although this is supposed to be a ready-to-fly product the quality control completely screwed that up.
None of bolts were fixed with locktite, which meant a motor got lose and tore off from the solder point the first minute of flight. Even though the motors and frame have 4 mounting holes, only 2 were used per motor. Pretty much all the bolts in the front half were lost as well.

I would not recommend this to a beginner and a pro would not bother of course, the performance of this quad is below standard and replacing arms, etc requires complete disassemble.

The integrated voltage regulator on the power distribution board is low-quality and the PCB traces are to thin to handle the current. So it got fried almost instantly.

So now I'm stuck having to order the replacement parts from the international store since the EU does not stock those.

I have bought this , Nice manual ,Good product! I disconnnected the LEDS they make flighttimes shorter, i used my 3D printer to make a plate to lift the battery above my reciever. Now i can fit my gopro. It is 570g With gopro 4 , 3s 1500mah 40c battery. I get around 6 min flighttime. If somone is interested in the CAD file of the upgrade part, please feel free to contact me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought this , Nice manual ,Good product! I disconnnected the LEDS they make flighttimes shorter, i used my 3D printer to make a plate to lift the battery above my reciever. Now i can fit my gopro. It is 570g With gopro 4 , 3s 1500mah 40c battery. I get around 6 min flighttime. If somone is interested in the CAD file of the upgrade part, please feel free to contact me.

Hi have purchased this fpv racer two weeks ago.

PRO: prize, osd included with Star Power FC (useful for monitoring voltage).

CONS: No SBUS support, no oneshot 125 support. It's necessary to change dip switch setting to program or fly modes.

Note: I use baseflight 2.4.0. baseflight firmware version, with 2.5 or above the fc doesn't arm motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi have purchased this fpv racer two weeks ago.

PRO: prize, osd included with Star Power FC (useful for monitoring voltage).

CONS: No SBUS support, no oneshot 125 support. It's necessary to change dip switch setting to program or fly modes.

Note: I use baseflight 2.4.0. baseflight firmware version, with 2.5 or above the fc doesn't arm motors.

I gave it one star overall for the lack of information supplied with it. It comes with a whole bunnch of individual wires for , I'm guessing the receiver, but no instruction manual. The stupid booklet that comes with it only tells you how to program the controller, where in the heck the wires go to and to WHAT is a mystery.BOO :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I gave it one star overall for the lack of information supplied with it. It comes with a whole bunnch of individual wires for , I'm guessing the receiver, but no instruction manual. The stupid booklet that comes with it only tells you how to program the controller, where in the heck the wires go to and to WHAT is a mystery.BOO :(

Customer files
Westerlund 32 Flight Controller with OSD Download [104]
Video TX instruction manual Download [85]
RX Connections Download [645]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save