Prix total

0,00 €

Panier 0 Panier 0 Loading...

Brushless Inrunner de KB45-08L

Generating Links

Brushless Inrunner de KB45-08L

Prix:

Now save économisez 0,00 € 0,00 €

38,42 €
Expédié de:
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
KB45-08L
Livraison gratuite? Cliquez ici pour apprendre plus!

Brushless Inrunner de KB45-08L
Kv: 2300rpm
Poids: 449g
Shaft: 6mm
Taille: 63x45mm
Tension: 36v
puissance nominale la plus élevée: 3439W
Ce moteur de taille s'adaptera notre plus grande 5inch et 4.75inch EDF parfaitement. (même des trous de montage et la taille de l'arbre)

Nous sommes toujours en attente de l'usine pour des données plus détaillées sur ces moteurs et mettra à jour cette liste une fois que nous l'avons.

  • Kv ( rpm / v) 2300.00
  • Max Current (A) 0.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 36.00
  • (W ) 3439.00
  • Arbre A ( mm ) 6.00
  • Longueur B ( mm ) 63.00
  • Can Diamètre C ( mm ) 45.00
  • Longueur Can D ( mm ) 61.00
  • Longueur totale E ( mm ) 83.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

antonio | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Mar 12, 2012

I tried finding the distance and the diameter of the holes of this motor before buying it, but I've not found it. So I'll be giving this indication: separation of diametrically opposed holes = 30 mm, diameter of holes: m4



good motor!

Imprez | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 24, 2011

Very good price, i receieved it this tuesday. a huge motor, the sizes are right.

It's a big and very powerful motor however it warms a lot, it is very inefficient, but, what the hell, 40 dollar a 5 hp brushless?

You can't expect a very good motor, but by this prize you wont find anything as powerful as cheap as this.

the biggest problem of this motor is it's warming

Client | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 13, 2011

this is one bad motor put it in a savage 25 conversion with the 150 amp esc 25-44 gears ithe savage will do back flips one after the other

it is the attention at all the rc car shows for the past year now the only thing wrong with this motor to much power HA stays cool

150 amp esc

25-44 gears

5200 mah batt.

cant go wrong with motor

Client | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Feb 07, 2011

I bought this motor not realizing it was a larger motor for planes, but i am glad i did. after finding a pinion gear that fit the shaft, i have had no problems. the motor gets warm but not too hot and it makes my kyosho wheelie on command. crazy power and top end with a 20t pinion. i could probably go up to 26t and increase my top speed without compromising torque. great motor for the price.

tullioturra' | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Feb 05, 2011

Type your review here.

Try to include as much data as possible.



I got this engine to run it with a 180 amp esc turnigy with my hull genesis many say they will not hold up to 6 s for a long time tell me that you will endure 'to 6 s on the genesis thanks for the reply

helix and that I should use weights?



cmoorehead@cablelynx.com | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jan 24, 2011

Used for hpi svavage 25 25 conversion it now does back flips and fast



used hobbyking esc and after first run had to change difs to the flux

and also the pinion 25 and spur 45 faster and stonger than nitro engine

Client | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jul 01, 2010

here is a test http://www.youtube.com/watch?v=am8b1tFbkQA

JVG | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 30, 2010

check the soldering on the connectors!! and watch the temps!

use in a 1/8scale truggy on 4s is very fast.

on 6s it's getting scary.

Client | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 28, 2010

i use this motor in my truggy with the turnigy ez run 150A esc on 4s lipo and it's very fast.

This motor will use allot of amps!! with my old motor i got 10 min runtime now i have 5 min.

but it's very fast at 4s lipo on 6s my truggy is doing more then 100 km/h watch the temp!! i have bought some kershaw 6mm mod1 pinions 18t and 20t.

JVG | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 17, 2010

arrived today, this motor is huge gonna put it in my truggy 1/8 scale. HOW many POLES does this motor have, i gues 4 but do not know for sure!!!!

  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!