S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

KD 63-34S Brushless Outrunner 206Kv

KD 63-34S Brushless Outrunner 206Kv

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
460 g
SKU:
KDA63-34S
Description
du

KA63-34S
Constant: 206Kv
Batterie: 10Cell Lipo
Courant de fonctionnement: 9-32A
Crête: 43A
Taille suggérée Prop: 19x12

Taille de l' arbre: 8.0mm x 24mm
Dimensions Moteur: 63mm x 56mm
Poids: 460g

Product
Specifications

Informations supplémentaires

  • Référence:
    KDA63-34S
  • Brand:
    Non communiqué
  • Poids (g)
    460.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    206.00
  • Max Currents (A)
    43.00
  • (W ):
    0.00
  • Longueur B ( mm ):
    56.00
  • Longueur Can D ( mm )
    24.00
  • Max Tension (V)
    37.00
  • Arbre A ( mm ):
    8.00
  • Unit Weight (g):
    460
  • Diamètre C ( mm )
    63.00
  • Longueur totale E ( mm )
    80.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor mounted in a Hanger 9 Fokker D-VII. Turning a 17x12E APC with 8S, 4000mha pack. Motor pulls 870w at 5300rpm and flys the plane very well. Not too fast and has scale performance. Other test values with different props:

16x12E 800w 5500rpm

15x13E 660w 5700rpm

17x10 750w 5600rpm

18x10 880w 5400rpm



I suspect that the suggested 19x12 prop will pull close to 1200w with 8S, not so sure I'd use 10S with that prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for my 26pcnt Peak MXS-R. With 2x5s3000 Zippies and a 20x10 JXF it pulls about 52A. Almost 2kW!. It runs a bit warn/hot, must add some baffles for better cooling. Only issues so far are:
1. A bit sloppy bearings, replaced with ceramic Abec7.
2. Stator came loose, strange noise after landing. Re-glued with 24h epoxy. Works fine now. Might be due to overtemp....

This is one is equvilent to AXI5320/34. Would whish for a bit more powerfull motor, but the a63-20L and 24L is are bit too heavy. A "a63-24M" (i.e. an AXI 5325/24 clone) would have been perfect.
Please HK, offer something inbetween S and L.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for my Hangar 9 Sopwith Camel which needs the noseweight. On 8S it spins an 18" propeller fast enough to fly the Camel comfortably. The motor is cool after landing but I don't remember how much current it drew. I get almost 40 minutes duration with a 8S 5000 mAh battery.



My motor has surface rust on the shaft but that doesn't matter. It's fantastic value for the money.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres bon en 12s avec une 19x15 35 A
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great motor but I have a couple of small complaints. Firstly, it is heavier than the specified 460g. It weighs 535g on its own, and 680g with all of its accessories. Secondly, I had to file a couple of grooves out of the flange mounted prop adaptor to clear the grub screws. Otherwise, once I got it running it was a great performer!



On 6S LiPo cells, with a 20x13 electric prop, it pulled 3,570g using 810W of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.