S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Brushless Inrunner de KD36-50-07S (de 9T)

Brushless Inrunner de KD36-50-07S (de 9T)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
267 g
SKU:
KD36-50-07S

Combinez

et économisez plus
acc
Description
du

Les inrunners KD36 sont equivilent à 540 moteurs de taille.

Dimensions: 36 ~ 50mm
montage avant trous sont 25mm à part.
Taille de l'arbre: 5mm
Poids: 220g

Spec.
Kv: 5000rpm / V (9T)
Idle actuelle: 6.1A
Résistance: 0,0045
Max Amp: 97A

Product
Specifications

Informations supplémentaires

  • Référence:
    KD36-50-07S
  • Brand:
    Non communiqué
  • Poids (g)
    267.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    5000.00
  • Max Currents (A)
    97.00
  • (W ):
    0.00
  • Longueur B ( mm ):
    51.00
  • Longueur Can D ( mm )
    49.00
  • Max Tension (V)
    0.00
  • Arbre A ( mm ):
    5.00
  • Unit Weight (g):
    220
  • Diamètre C ( mm )
    36.00
  • Longueur totale E ( mm )
    68.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Have installed this in a Traxxas Slash together with HK 100a ESC. Have tried the combo with 2s and 3s, but have not tried it with 4s yet.

At first testrun I was not able to do full speed with 3s, because it reached to high speed and startet to fly. Have to adhust the car, with a wing in front to keep the front wheels on the ground. Shoul be possible to reach speed 120km/h +++
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor. For the price you will be hard pressed to find a better one.

Only concern at this time is the temp the motor runs at. I have a limited selection of 5mm pinions so I have ordered some new 48 pitch pinions and will try regearing to remove some heat from the motor.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality motor. For the price you are going to be hard pressed to find a better one.

Only concern is the motors tends to run a little on the hot side. This maybe due to my limited pinion options at this time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
here is a test http://www.youtube.com/watch?v=am8b1tFbkQA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm looking to put this on a fast flying wing, maybe two of them. What props are ideal for fast flying? 6x5.5? 7x7?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super moteur mont dans un Buggy 4x2,plein de puissance et de couple
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely powerful motor! I used this in my Rustler with 3s lipo and I think it's even better than the castle 5700kv motor! Just be careful with the motor wires because the plastic around them shatters really quick...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tengo montado este motor en un Traxxas Slash, junto con un variador de 60A, relacion 18/86. Haciendolo trabajar con Lipos 3S tiene una aceleracion brutal y una velocidad punta expectacular. Hay que ir muy cuidadoso con el gatillo, pero me cepillo a los nitrosos, jejeje.



Totalmente recomendable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Same issue as CiberDog except I noticed it upon initial inspection (so no burned up ESC for me). Wire insulation is so brittle that it falls off if the wires are bended at the base of the motor. The exposed wires end up touching the endbell. I won't dare to connect this to any ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the motor itself so powerful and work great with deepvee



verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.