New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Brushless Inrunner de KD36-50-08S (de 10T)

Brushless Inrunner de KD36-50-08S (de 10T)

Discontinued Product

Please continue searching for a similar product.
Poids
267 g
SKU:
KD36-50-08S
WANT FREE SHIPPING? Click here to find out more!

Les inrunners KD36 sont equivilent à 540 moteurs de taille.

Dimensions: 36 ~ 50mm
montage avant trous sont 25mm à part.
Taille de l'arbre: 5mm
Poids: 220g

Spec.
Kv: 4400rpm / V (10T)
Idle actuelle: 5.6A
Résistance: 0,0061
Max Amp: 80A

  • UGS KD36-50-08S
  • Brand -
  • Poids (g) 267.00
  • Longueur 0.00
  • Largeur 0.00
  • la taille 0.00
  • Kv ( rpm / v) 4400.00
  • Max Current (A) 80.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 0.00
  • (W ) 0.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 51.00
  • Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 51.00
  • Longueur totale E ( mm ) 67.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have the EZ-RUN 35A(190A burst) ESC and looking for a back up motor to the Brushless 9T 4300Kv Motor it was bundled with. The ESC doesn't even break a warm temp with the 9T 4300Kv so I am hoping I can try one of these or even better a higher KV version. Please let me know.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have the EZ-RUN 35A(190A burst) ESC and looking for a back up motor to the Brushless 9T 4300Kv Motor it was bundled with. The ESC doesn't even break a warm temp with the 9T 4300Kv so I am hoping I can try one of these or even better a higher KV version. Please let me know.

What a power house this motor is. Running a 200A ESC just to make sure. Very well built, high quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a power house this motor is. Running a 200A ESC just to make sure. Very well built, high quality.

Runs very hot in Traxxas Slash works off orginal VXL ESC, used replace Velineon 3500 brushless motor. I would high suggest getting a heatsink though, im waiting on one so I dont fry it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Runs very hot in Traxxas Slash works off orginal VXL ESC, used replace Velineon 3500 brushless motor. I would high suggest getting a heatsink though, im waiting on one so I dont fry it.

Works well but needs cooling. becomes excessively warm and does not have any vents. The rotor cannot be seen directly. The gold plating on the leads was half gone when I received it. Overall performance vs price 5*

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works well but needs cooling. becomes excessively warm and does not have any vents. The rotor cannot be seen directly. The gold plating on the leads was half gone when I received it. Overall performance vs price 5*

The price is good. However, the low quality of the product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The price is good. However, the low quality of the product.

When you sell this motors/5 mm shaft/ have had sell also 5 mm hole Pinions gear whit divers moduls and amount cogwhells.



thanks :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When you sell this motors/5 mm shaft/ have had sell also 5 mm hole Pinions gear whit divers moduls and amount cogwhells.



thanks :)

Habe ich fr einen Freund gekauft, daher habe ich leider keine genauen Infos. Weis nur das der Motor nun 1 Woche im Einsatz ist, und keine Probleme macht.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe ich fr einen Freund gekauft, daher habe ich leider keine genauen Infos. Weis nur das der Motor nun 1 Woche im Einsatz ist, und keine Probleme macht.

montage de merde du vernis a bloc et les 3 phases non isoler

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

montage de merde du vernis a bloc et les 3 phases non isoler

Geared down at 12 tooth pinion on CRT.5 is good feel. 5mm shaft fits the mod1 pinions just right. Hopefully my shaft breakage on smaller shafts will not be a problem with this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Geared down at 12 tooth pinion on CRT.5 is good feel. 5mm shaft fits the mod1 pinions just right. Hopefully my shaft breakage on smaller shafts will not be a problem with this motor.

Habe ich fr einen Freund gekauft, daher habe ich leider keine genauen Infos. Weis nur das der Motor nun 1 Woche im Einsatz ist, und keine Probleme macht.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe ich fr einen Freund gekauft, daher habe ich leider keine genauen Infos. Weis nur das der Motor nun 1 Woche im Einsatz ist, und keine Probleme macht.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!