S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Brushless Inrunner de KDA 28-47 9Turn

Brushless Inrunner de KDA 28-47 9Turn

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
155 g
SKU:
KB28-47-09S
Description
du

Brushless Inrunner de KDA 28-47 9Turn

KB28-47-09S
Taille
de l' arbre: 3.17mm x 12mm
Dimensions Moteur: 27.6mm x 47mm
Poids: 135g

Spec Motor.
Kv: 4300
Idle actuelle: 2.4A
Résistance: 0,0119
Max actuel: 45A

Product
Specifications

Informations supplémentaires

  • Référence:
    KB28-47-09S
  • Brand:
    Non communiqué
  • Poids (g)
    155.00
  • Longueur
    0.00
  • Largeur:
    0.00
  • Taille:
    0.00
  • Kv ( rpm / v)
    4300.00
  • Max Currents (A)
    45.00
  • (W ):
    0.00
  • Longueur B ( mm ):
    48.00
  • Longueur Can D ( mm )
    45.00
  • Max Tension (V)
    0.00
  • Arbre A ( mm ):
    3.00
  • Unit Weight (g):
    135
  • Diamètre C ( mm )
    28.00
  • Longueur totale E ( mm )
    60.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great price. Quality seems good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's fits perfectly without any modification in mini e-revo, run faster than stock motor and it's insane with 3S. I think it's possible to run with HK60A ESC, I'll test. It got 55 degress (celcius) without heat sink after 10 minutes with 3S.
Mini revo 1/16 thanks to hobby king for this motor and HK ESC :)

Parece andar mais que o motor original e insano com lipo de 3S. Eu acho que da pra andar com o ESC 60A da hobby king, vou testar. Ficou com mais ou menos 55 graus depois de 10 minutos andando moderadamente com lipo de 3S. Ele substitui o motor original perfeitamente, sem precisar fazer modificao alguma. Eu recomendo!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have Purchased this powerful brushless motor a long with a Hobbyking 60amp ESC for only $27.99 Also with a 2s lipo battery pack in my Tamiya TT01. Unbelievable speeds of up to 100KM/H
just 2s 7.4v lipo and the car goes over 100kmh with out much heat catching the motor Really recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hey guys, this motor packs a lot of power when it comes to racing rc cars, I installed this on my Tamiya TT01 along with a hobbyking 60amp speed control and a 4s 5000mah battery, speeds of 80kph upto 110kph. Recommended for speed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The windings in this motor allow it to go up to 4s and around 90amps BUT...BUT the magnets wont and will demagnetize because of the heat. If you can find a way to take away the heat this is one of the best deals out there on a high wattage motors.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using in Traxxas 1/16 E-Revo VXL. The same or even better performance than stock motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm not sure of this motor but I think it will work perfect in a GlobalHawk.



It should fits ok in a 70mm EDF.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this with Turnigy 60 amp ESC on my Traxxas 1/16 Revo. The combination is insane on 3s and pretty nice on 2s. Never gets hot, and has more oomph than Traxxas motor. I really like the wire covers on the leads very protective.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good quality price relation for an EDF. With attention I drilled holes in the front and backplate for a better cooling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
put it with 7 blade 2.5'' on e-domodol f-15 fly amazing on 3s also try 4s became a rocket.

but need a good esc and a lot of amps.

strong motor run smoove and build good.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.