S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Kingduino Compatible Président Module Buzzer

Kingduino Compatible Président Module Buzzer

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
14 g
SKU:
438000026
Description
du


Arduino Compatible Président Buzzer Module. Pins à GND,
sortie d'E / S numérique I à la sortie de la broche VCC S à 3,3 ~ 5V.

Spécifications:
Profondeur: 10 mm
Hauteur: 19 mm
Largeur: 16 mm
Poids du produit: 2,4 g
Tension de fonctionnement: 3.3V - 5v

* Note: Ce ne sont pas un produit original de marque Arduino.

Product
Specifications

Informations supplémentaires

  • Référence:
    438000026
  • Brand:
    Non
  • Capacité ( mAh )
    Non
  • Poids (g)
    14.00
  • Longueur:
    30.00
  • Largeur:
    10.00
  • Taille
    15.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I had the same experience with this as Jastra. The pin labelling seems to be incorrect. When I connected signal to (-) and ground to (S) it worked. I have no idea what the middle pin is for.

I just noticed the labelling on the photo is opposite what it is on the one I received.

I'm done with HK for arduino stuff. I typically get cheaper, better quality and more accurate product info from China sellers on fleabay.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Correction: If you simply put the (-) pin high (5V) and the (S) pin to ground (opposite to the product explanation) it buzzes well and pulls only about 25mA.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The buzzers seem to work ok. The 5V channel seems to be unused though. Desolderd the buzzer, middle pin not connected. The (S) Signal and (-) pins are reversed. Mine only worked when I put signal on the (-) pin and ground on the (S) pin. Even with a 100Ohm resistor in series, it still pulled 50mA wich is too much for an Arduino Port. Resoldering the Buzzer 180deg would make the pins right.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.